Top Ethernet Servo Board
KEYESTUDIO 16-Channel 12-bit Servo Motor Driver Board I2C Interface for Arduino
- This expansion board can directly stack on the controller R3 board and can drive up to 16 servos.
- Uses I2C input, just occupy A4 and A5 interface on the control board.
- Contains PCB double sided holes, can direct to solder with components to build up prototyping circuits.
- Servo power supply independent V + input up to 6V.
- How to use: Search for "keyestudio wiki KS0258" in Google Chrome to get the wiki online tutorial for this product..
Check StockMKS SERVO42C NEMA17 Closed Loop Stepper Motor Driver Low Noise for CNC 3D Printer Prevent Losing Steps Compatible with Gen L SGen L SKR 2 / V1.4 Turbo BTT Octopus V1.1 Mainboard
- MKS servo42C is a product developed by MKS to meet market demand. The closed-loop motor uses the motor's rotation angle feedback to the drive circuit to detect whether every step that should be taken has been taken to prevent losing steps. If a closed loop occurs, the motor will make up or lose steps through the feedback information, and the blue LED on the closed loop module will light up..
- Support 1-256 subdivision,odd subdivision (such as 11 subdivision) is also available. And support motors with 0.9 degree or 1.8 degree. Maximum speed 1000RPM. With usart interface, you can connect the computer by serial port, for parameter adjustment and query..
- Position /speed/torque closed-loop, it can run at high speed without losing step. Easy to install and wire. The max printing speed can reach 150-180mm/S. Field-Oriented control, low noise, low vibration and low calorific. 4 Half bridge driver with 8 MOSFET, high operating efficiency. 14Bits magnetic encoder, high angle resolution..
- Compatible with Gen L SGen L, SKR 2 / V1.4 Turbo BTT Octopus V1.1 Motherboard and other board which is seperated with drivers, that means drivers is not soldered onto the board.
- Package: 1*MKS SERVO42C(include motor) + 1*Adapter board(MKS APT) + 1*60cm 6pin Data Cable . (User metho....
Check StockBarnabas Robotics Servo Motor Tester Kit | 180 Degree 9g Servo Motor + RC Servo Tester Controller + 6V Battery Holder
- [CONVENIENT, ALL-IN-ONE KIT FOR TESTING SERVO MOTORS] Experiment with servo motors with this all-inclusive kit. Includes 9g servo motor + servo tester controller + 6V battery holder at a low price!.
- [9G Servo Motor] 180 degree range of motion. Includes 3 types of servo horns..
- [4 CELL x AA BATTERY HOLDER] Fits 4 x AA batteries, which produces 6V for your servo tester and servo motors..
- [SERVO TESTER] Includes 3 modes to test servo motors or ESC.
- [GREAT FOR RC APPLICATIONS] Use as a power source for robotics, RC cars, helicopters, planes, boats and or any hobby projects.
Check StockOrange Pi Pc Plus RAM 1G AllWinner H3 Quad Core Open Source Development Board Desktop with 8GB Emmc Flash, Run Android Ubuntu Debian Single Board Computer (PC Plus)
- Orange Pi PC PLUS adopts Allwinner quad-core A7 high-performance processor Allwinner H3, integrates Ethernet, DC power input, video/audio output and other interfaces, and supports HDMI, AVOUT video output and other functions. Note: Our shipping time generally takes 15 days, Not as long as Amazon suggests..
- Orange Pi PC Plus RAM 1G with 8GB Emmc Flash ,Mini Open-Source Single Board,Support 100M Ethernet Port/Wifi/Camera/Hdmi/IR/MIC.
- Orange Pi PC Plus open source development board references quite rich interfaces, including HDMI, Ethernet, USB-Host, USB-OTG, DVP camera, etc. And it integrates on-board network, on-board storage, LED indicator, and our development board is compatible with Raspberry Pi GPIO port, has a unique debugging serial port, etc..
- Memory (SDRAM): 1GB DDR3 (shared with GPU). Onboard Storage: TF card (Max. 32GB) / MMC card slot, 8GB EMMC Flash.
- Three USB 2.0 HOST, one USB 2.0 OTG, 40 Pins Header, Camera Interfacce, HDMI, MIC, IR Receiver.
- Orange Pi Single Board Computers can builed a computer, a wireless server, Games, music and sounds, HD video, a speaker, Android, Scratch.Pretty much anything else, because Orange Pi is open source..
- Notice before order: By default, we won't responsible for customs clearance fee charged by your local. If ....
Check StockWEISHUJI 25T Servo Horn Steering Arm, Servo Horn 25T Steering Arm, Aluminum 25T Servo Horn Steering Arm for Traxxas TRX4 Axial SCX10 Tamiya 1/10 RC Crawler Truck (Red-Black)
- 25T Servo Horn Steering Arm fits for Traxxas TRX4 Axial SCX10, SCX10 ii 90046 1:10 scale rc crawler, and Servo Horn 25T Steering Arm is CNC machined..
- 25T Servo Horn Steering Arm has 18mm and 22mm threaded mounting holes for adjustability, and Servo Horn 25T Steering Arm is of high quality..
- 25T Servo Horn Steering Arm is Red-Black, and Aluminum 25T Servo Horn Steering Arm is of small size and lightweight..
- 25T Servo Horn Steering Arm works on Futaba, Savox, Emax, HSP, Power HD, Xcore, Aluminum 25T Servo Horn Steering Arm works on other popular prand servos motor (Except Hitec and JR Servos)..
- Package of 25T Servo Horn Steering Arm includes: 1 x 25T Servo Arm (Red-Black), Servo Horn 25T Steering Arm, Aluminum 25T Servo Horn Steering Arm.
Check StockSunFounder Mega 2560 R3 ATmega2560-16AU Board and Ethernet Shield W5100 for Arduino
- The mega 2560 R3 Board is 100% compatible with Arduino. Powered via the USB connection or with an external power supply. The power source is selected automatically..
- The ATmega2560-16au has 256 KB of flash memory for storing code (of which 8 KB is used for the bootloader), 8 KB of SRAM and 4 KB of EEPROM (which can be read and written with the EEPROM library)..
- The mega 2560 comes preburned with a bootloader that allows you to upload new code to it without the use of an external hardware programmer. It communicates using the original STK500 protocol (reference, C header files).This version is optimized in the original version, both to ensure consistent and compatible with the original, but also easy to use..
- With this Ethernet Shield, for Arduino board can be used to connect to internet. It can be used as server or client. Directly plug puzzle board, no soldering required..
- This Ethernet Shield is directly compatible with Arduino official Ethernet Library. It adds a micro-SD card slot, which can be used to store files for serving over the network..
Check StockWEISHUJI 10PCS 25T Aluminum Servo Horns Arms, M3 Threads Metal Steering Arm for Towerpro, HSP, HD power, Futaba, Axial, Savox, Xcore, Standard Servos Motors, MG995 MG996R MG946R, S3003 etc servo (Red)
- 25T Aluminum Servo Horns Arms are suitable for mostly 25T Standard Servo Motor, and M3 Threads Metal Steering Arm is compatible with Towerpro HSP HD power Futaba Axial Savox Xcore Standard Servos Motors MG995 MG996R MG946R S3003 etc servo..
- 25T Aluminum Servo Horns Arms are made of strong aluminum, 25T Aluminum Servo Horns M3 Threads are hard to break..
- 25T Aluminum Servo Horns Arms are of dimension 35x15x6mm, and Metal Steering Arm behaves very well on your RC models..
- 25T Aluminum Servo Horns Arms are djustable type servo arm, and M3 Threads Metal Steering Arm have two steel bolts to secure the split-clamp onto the servo output..
- Package of 25T Aluminum Servo Horns Arms include: 10 x 25T Aluminum Servo Horn-Red, M3 Threads Metal Steering Arm, 25T Aluminum Servo Horns M3 Threads some hardware.
Check StockWEISHUJI Aluminum Servo Horns,25T Aluminum Servo Horns,Aluminum servo Horn 25T Servo Horn Extension Steering Arm Server Rocker for RC Car Truck Buggy 5Pcs
- Aluminum Servo Horns are made of High Quality CNC Machined Aluminum, sturdy and durable..
- 25T Aluminum Servo Horns are compatible with Futaba, Savox, Orion, & Other Popular Servos (25T Aluminum Servo Horns Will Not Work On Hitec Or JR Servos)..
- Aluminum servo horn 25t Dimension:aluminum servo horn 25t Length: 37mm/1.462 inches..
- Distance from Servo Horn Extension Steering Arm Server Rocker hole center to Servo Horn Extension Steering Arm Server Rocker hole center:8mm, 11mm, 14mm, 17mm..
- Package List of Aluminum servo horn 25t includes: 5 * Aluminum servo horn 25t.
Check StockMicro Machines Playtronic MAX
- Metal gear servo 9g is equivalent to the metal tooth plate of SG90. The installation size is slightly different from that of SG90. The servo system is more comfortable than cheap plastic gears..
- Servo can rotate approximately 180 degrees (90 in each direction), and works just like the standard kinds but smaller..
- This MG90S Micro Servo has metal gears for added strength and durability.It comes with a 3 horns (arms) and hardware..
- The servo motors weight is 13.6g, suitable for 450 electric straight, swash plate steering gear, fixed-wing RC airplane..
- The package included 6pcs MG90S Micro Servo, each MG90S come with one motor and three servo arms and three screws..
Check StockMACH3 Controller USB MACH3 100Khz Motion Controller Card Breakout Board Controller Card for CNC Engraving Servo Motor Stepper Motor Servo motor
- 【Functions】The function of this motion control card includes that it supports automatic probe tool, emergency input, limit switch, and supports....
- 【4-axis Linkage】Usb interface board supports for 4-axis linkage, you can connect four stepper motor drives or servo drives. 4 general-purpose....
- 【Wide Use】The maximum step-pulse frequency of motion control card is100KHz, which is very suitable for CNC Engraving, Servo Motor, Stepper Motor....
- 【Advantage】The motion controller needs using external 24V DC power to isolate USB and external port, and to make the system more stable. And it....
- 【Drive Output Interface】The 4 general-purpose isolated relay drive output interface can drive four relays for controlling the spindle starts,....
Check StockZHIPAIJI for FLYWING FW200 rc Helicopter Spare Part Servo Arm FW200 Parts FW219
- Metal 25T Servo Arm Round Type is suitable for Hitec, Parallax, Futaba and other brands (40x20x36mm) standard servos..
- Metal 25T Servo Arm Round Type Material is CNC Aluminium..
- Metal 25T Servo Arm Round Type Mounting Hole Spacing is 14mm..
- Metal 25T Servo Arm Round Type Servo disc diameter is approx 20mm..
- Package of Metal 25T Servo Arm Round Type Includes: 5 x Servo Accessories Disc 20 x Screws.
Check StockQue-T Brass Steering Servo Horn Arms 3.1/4.1/5.1mm for RC Car Boat Rudder Parts (Brass, 4.1mm)
- Suitable--The servo arm is suitable for EMAX ES08MA II/ES08MD II Servo (For Axial SCX24 Crawler)..
- High Quality--Our rc servo arm is made of aluminum alloy material, not easy to corrode, construct for precision and durability..
- High Precision--CNC machining makes it precise in size and stable in performance..
- RC Servo Bracket--This servo arm comes with a servo bracket, which is made of high quality aluminum, anodized and durable..
- What You can Get--A rc servo arm with some screws, easy to install, and a rc servo bracket..
Check Stock