Top Ethernet Switch Module

RPi 3.3V to 5V 26 I/O Bidirectional Voltage-Level Shifter Module for Raspberry Pi, Logic Level Converter

  • Reliable and suitable for a wide range of uses..
  • High conversion efficiency, simple regulating operation..
  • Modbus TCP Ethernet Remote IO Module (8DI+8DO+8AI+RJ45+RS485).
  • The M160T Ethernet Remote I/O Module is an industrial class, isolated designed, high reliability, high stability and high precision data acquisition module,.
  • It provides multi I/O, supports standard Modbus TCP, can be intergraded into SCADA, OPC server, and other automation systems. It is design for working in the harsh industrial application environment, widely used in a variety of industrial automation, monitoring system, automatically measurement and control system..
Check Stock

Heayzoki Power Supply Module for Raspberry Pi 4B / 3B + Ethernet POE Fan Electronic Component,for Raspberry Pi Ethernet POE Fan Power Supply Module

  • This product provides a convenient and cost-effective way to power equipment..
  • This module allows you to apply DC voltage to specific pairs of Ethernet cables so that devices connected to the network can use it as a power source..
  • This module is ideal for any PoE application with limited space, such as IP cameras, biometrics, readers, network audio, etc..
  • For Raspberry Pi Ethernet POE fan power supply module, supports for Raspberry Pi 4B/3B+, provides clean and reliable power supply..
  • With small size, easy to carry and store, convenient to use and with good performance..
Check Stock

Ethernet Splitter [Paired Use Only] Network Cable Y Division Adapter LAN Cord 1to2 Port Separator Internet line Segregator 1 to 2 Way Hub Connector for RJ45 Cat5/Cat5e/Cat6/Cat6a/Cat6e/Cat7 [2-Pack]

  • Please NOTE: Equipped with a 1.2m/4ft USB charging cable, it can support charging and networking at the same time. CAN NOT be used without connection..
  • Ethernet Splitter 1 to 2: This RJ45 ethernet splitter is mainly used to solve the connection problem caused by insufficient wiring, Use the USB power supply cable and support two computers to share one Ethernet line simultaneously by means of the physical tapping method. Note: Two Female Port Workable Simultaneously..
  • Transfer Speed: RJ45 Splitter Adapter can divide a network cable into two outputs, the speed of each cable group (1 and 2) can only reach 100Mbps.And the signal transmission of two cable groups will not interfere with each other..
  • Transmission More Stable: The Network Splitter Ethernet Built-in Thick Environmental Protection PCB Circuit Board, RJ45 Eight-core Standard Jack, Gold-plated Pin Core, Integrated Mechanical Welding, More Stable Transmission Signal, it is more convenient to design closed insulation module and safer to use..
  • Wide Compatibility: RJ45 8P8C LAN Ethernet Splitter connector extender is compatible wi....
Check Stock

DIGISHUO Raspberry Pi 4B Model B 2/4/8GB RAM DIY Kit Case Fan SD Card Micro-SD HDMI (8G Module 8 in 1 Kit)

  • 【Raspberry Pi 4 Model B Starter Kit】 Motherboard, New SOC Broadcom BCM2711, quad-core Cortex-A72 (ARM v8) 64-bit at 1.5GHz. Capable of supporting HEVC 4K streams at 60 fps and managing 2 screens in 4K.
  • 【Fastest Raspbery Pi 4 Model B Starter Kit】Dual band 802.11b/g/n/ac WiFi (2.4/5.0 GHz) and Bluetooth 5.0 module. Transfers via 2 USB 3.0 & 2 USB 2.0 ports is faster up to 10 times, 4Gb/s or 500 MB/s. Faster Gigabit Ethernet & Power-over-Ethernet support.
  • 【64GB Class 10 SanDisk Micro SD Card】Use brand new sd card and have no noobs in it you need install system yourself.
  • 【4B Module Cooling Kit】Pi cooling fan with 4 pcs heatsink will make the pi module cooling fast.
  • 【Customized Case】will protect the pi module for well and can also work with 3.5 screen.
  • 【RAM Size Can be Chosen】You can choose 2G or 4G or 8G for your project.
Check Stock

Carry Case 16 Game Card and Stylus Holders Large Pocket for Nintendo 3DS XL & 3DS & 2DS XL

  • L R Left Right Shoulder Trigger Button Switch Connector Module Flex Cable Replacement Compatible with Nintendo 3DS XL (not fit 3DS).
  • Tips: This is L R Left Right Shoulder Trigger Button Switch Connector Module Flex Cable replacement to replace your old damage L R Left Right Shoulder Trigger Button Switch Connector Module Flex Cable, don't include instructions, please install it by a professional technician..
  • Broken your L R Left Right Shoulder Trigger Button Switch Connector Module Flex Cable, don't need to change new machine, just buy this item and replce your damage L R Left Right Shoulder Trigger Button Switch Connector Module Flex Cable, let your Device work again again..
  • Compatible with: Nintendo 3DS XL (not fit 3DS) (Please check your machine model before your purchase).
  • Shipped by Amazon. Any questions, please contact us first, we will try our best to help you..
Check Stock

TRENDnet 6-Port Fast Ethernet PoE+ Switch, 4 x Fast Ethernet PoE Ports, 2 x Fast Ethernet Ports, 60W PoE Budget, 1.2 Gbps Switch Capacity, Metal, Lifetime Protection, Black, TPE-S50

  • ETHERNET PORT INTERFACE 4 x Fast Ethernet PoE+ ports and 2 x Fast Ethernet ports.
  • POE POWER BUDGET & SWITCH CAPACITY: This PoE+ switch supports both PoE (802.3af) and PoE+ (802.3at) devices with a 60 W PoE power budget that delivers data and power over existing Ethernet cables to Power over Ethernet (PoE) devices such as access points, VoIP phones, and IP Cameras. The 6-port fast Ethernet PoE+ network switch provides 1.2 Gbps switching capacity to support edge network installations..
  • COMPACT FANLESS DESIGN With a compact and lightweight rugged metal housing design this desktop switch is well-suited for desktop installations Its fanless design is ideal for quiet environments that require silent operation.
  • DATA TRANSFER RATE Ethernet 10 Mbps (half duplex) 20 Mbps (full duplex) Fast Ethernet 100 Mbps (half duplex) 200 Mbps (full duplex).
  • OPERATING TEMPERATURE This 6-port fast Ethernet PoE+ network switch is rated with an operating temperature range of 0 – 40 °C (32 - 104 °F).
  • TRENDnet LIFETIME PROTECTION: All metal TRENDnet switches are backed by our lifetime TRENDnet Manufacturer Protection. Renewed or refurbished products come with a 90 day Amazon Renewed Guarantee..
Check Stock

Mini 1.25G Media Converter(kit #1), SFP Slot, with a SFP Module, MMF, 850-nm, 550-m

  • Small size: nearly 50% smaller than traditional converters. Its compact modular design facilitates deployment in a narrow desktop location to save space..
  • 1x Dual LC fiber Optical Port: 1.25Gbps, 850nm wavelength, support Gigabit Ethernet.
  • 1x RJ45 Port: 10M/100M/1000M, supports Full/Half Duplex auto-negotiation and MDI/MDIX auto-crossover, conform to IEEE 802.3/802.3u/802.3z/802.3ab, UTP/STP Cat.5e for 100 meters..
  • Smart Management: LED indicators for PWR, FX, 1000, LINK can dynamic feedback link connection state and fault detection to easily monitor network status.
  • DIP switch for LFP, 9K, Flow Control,100/1000 can support LFP (Link Loss Propagation) feature.
  • the max 9000 byte Ethernet packet, jumbo frames supported.
  • Easy Installation and Use: Modulization configuration design, support hot-swappable, plug and play. 2 side heat dissipation holes and durable metal shell helps dissipate heat under extreme conditions. The working temperature range is 0°C-50°C (32°F-122°F)..
  • What You Get: 1x 1.25G SFP Slot Media Converter.
  • 1x 1000Base-SX SFP Module, 1x Power Adapter(5V1A, UL Certified).
  • 1x User Manual. 30-day Money-Back guarantee with 1 Year warranty and lifetime tech support..
Check Stock

NETGEAR ProSafe GS608 8-Port Gigabit Ethernet Switch

  • Product Description NETGEAR GS608 8-Port Gigabit Desktop Switch - switch - 8 portsDevice Type Switch - WARNING: The solder used in this product contains lead, a chemical known to the State of California to cause birth defects and other reproductive harm. Please wash hands after handling internal components and circuit boards and avoid inhalation of fumes if heating the solder..
  • Form Factor External Dimensions (WxDxH) 7 in x 4.6 in x 1.2 in Weight 0.7 lbs.
  • Localization North America RAM 1 MB - NOTE: THIS PRODUCT CANNOT BE SHIPPED TO MASSACHUSETTS OR DISTRICT OF COLUMBIA (WASHINGTON, D.C.).
  • Ports Qty 8 x Ethernet 10Base-T, Ethernet 100Base-TX, Ethernet 1000Base-T Data Transfer Rate 1 Gbps.
  • Data Link Protocol Ethernet, Fast Ethernet, Gigabit Ethernet.
Check Stock

Philips Hue 2-Pack Wall Switch Module (For Philips Hue lights only), White

  • KEEP YOUR LIGHTS POWERED ON AND REACHABLE: With the Philips Hue wall switch module, your lights are always on and connected to your smart lighting system..
  • CONTROL LIGHTS, ROOMS, OR A ZONE: Use your existing light switch to control your Philips Hue smart lights in a Room or Zone..
  • CYCLE THROUGH UP TO THREE LIGHT SCENES: Use your existing light switch to set up to three different light scenes..
  • BATTERY INCLUDED: The Philips Hue wall switch module includes a battery with a minimum lifetime of five years..
  • HUE BRIDGE REQUIRED: The Philips Hue wall switch module requires a Hue Bridge..
Check Stock

uxcell BWL100 100 mm Pull Rod Linear Position Displacement Sensor for Printer

  • Shipping list: AC 220V vibration sensor delay module, with ultra-high sensitivity vibration sensor..
  • AC 220V power supply ultra-high sensitivity vibration delay module plus relay module plus delay three-in-one module, vibration switch module Alarm trigger, with 1 vibration sensor. Relay does not have B1 normally closed end..
  • corridor delay switch, delay energy-saving products.
  • Supply voltage: AC 220V power supply, Current: greater than 100mA.
Check Stock

ACEIRMC 3pcs W5500 SPI to LAN Ethernet Network Module TCP IP STM32 Interface 3.3V 5V for Arduino WIZ820io RC5

  • Power supply mode:3.3V external power supply, current should be more than 200mA.
  • USR-ES1 is the Ethernet module of a SPI interface, interface is TTL level of 3.3V, power supply voltage of +3.3V, please ensure that the current is not less than 200mA, voltage is continuous and stable +3.3V..
  • W5500 SPI to LAN Ethernet Network Module TCP IP STM32 Interface 3.3V 5V for Arduino WIZ820io RC5.
  • Control interface:The TTL level, 3.3V SPI interface.
Check Stock

MikroTik 9-Port Desktop Switch 1 Gigabit Ethernet Port 8 SFP+ 10Gbps Ports CRS309-1G-8S+IN

  • The CRS309-1G-8S+ is a very compact, yet powerful networking switch.
  • It has eight SFP+ slots, supporting up to 10 Gbit module in each, which results in a total switching capacity of 162 Gbps and total non-blocking throughput of 81 Gbps.
  • The device also has dual-core 800 MHz CPU, 512 MB RAM, a management Ethernet port with PoE power input, RS232 serial port, a grounding terminal and is capable of dual boot (choose which operating system you prefer, RouterOS, or SwOS).
  • The compact and sleek metallic enclosure also acts as a heatsink, making this device passively cooled - no fan noise and no dust accumulation inside.
  • Special rackmount ears for installing unit into the standard rack are provided.
Check Stock