Top Exhaust Bolts

ZOENHOU 4 PCS 2 Inch Butt Joint Exhaust Band Clamp, 304 Stainless Steel Exhaust Band Clamp Sleeve for Exhaust Pipe, Muffler, Headers, Manifolds, Coupler

  • PREMIUM MATERIAL - The 2 inch exhaust clamp is made from high quality 304 stainless steel, stainless steel material, not easy to rust, corrosion-resistant. Precision-machined, shiny surface with no burr. Inside diameter: 2 inches..
  • EASY INSTALLATION - Put one of the nutbars on one side and insert the bolts, put another nut bar on, then screw the nuts, and connect. It is removable, without welding, and saving time and effort..
  • WIDE RANGE OF APPLICATIONS - Butt joint exhaust clamp suitable for the exhaust system, pipes, muffler. Arc curved face, capability prevent exhaust gas and noise leaks. The exhaust band clamp is reusable without damaging the pipes..
  • PERFECT DESIGN - Our exhaust pipe clamp for exhaust provides a 360-degree full clamping area to generate overall sealing force without distorting exhaust pipe, exhaust muffler ends and exhaust tubing in exhaust system connections!.
  • WORRY-FREE SHOPPING - Please do not hesitate to contact us if any issues with our exhaust band clamp sleeve, you can get 30 days of worry-free refund, 7 days of 24-hour service after receiving it. Just remember that your satisfaction is our first priority..
Check Stock

Vance & Hines Replacement Baffle for Straightshot Performance Exhaust Systems 21877

  • Typically Reduce Sound Output by 2-3 db,Nice Aftermarket Replacement.
  • Dimension:7.75*2.1 Inch (Length*OD*),Pls Confirm the Inner Diameter of your Exhaust Pipe before Purchasing, Note: Not Fit for 2009 FXSTSSE.This Quiet Baffle is Hand-made and Wrapped in the Middle Part,pls Allow Minor Differences of the Measurement.
  • Quiet Baffle is Wraped by Silencer Cotton+Aluminum Foil ,it can be directly used on your bike,No Mounting Bolts Included.
  • Notes: It is recommended that new exhaust gaskets and a proper jet kit be installed when changing an exhaust system on a carburated motorcycle, or new exhaust gaskets and a digital fuel processor when changing an exhaust system on a fuel-injected motorcycle. Discoloration (bluing) is caused by tuning characteristics, like cam timing, carb jetting, etc., and is not caused by defective manufacturing..
Check Stock

Remflex 8002 Universal Exhaust Gasket, (Set of 2)

  • Universal 3” Collector Flange, 3 Bolt Holes, 3-3/8" Bolt Hole Spacing, 2/Set.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
  • Remflex exhaust gaskets fill those gaps permanently.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

Exhaust Manifold Bolt Repair Kit Compatible with 1999 & Newer GM Trucks and SUV's With a 4.8L, 5.3L, 6.0L & 6.2L LS Engines (Driver Front/Passenger Side-Rear)

  • ...de of your vehicle. If you have a 6.0L engine in your vehicle it will fit 100% (1999 and newer) as there is only one manifold style for the 6.0L engine..
  • 【Function and Role 】Install this part is to repair the driver's side front or the passenger side rear corner broken exhaust manifold bolts. Stops exhaust leaks that occur between the exhaust manifold and the cylinder head. Make your driving quieter..
  • 【High-Quality Materials】 Exhaust manifold repair brackets made of High quality carbon steel, up to OEM standard.TIG welding for durablity and long service time.exhaust manifold bolt repair brackets will not fail like the bolts do from heat and expansion of the manifold.
  • 【After-sales service】Confidence originates from quality! We promise to provide one free return/exchange within 30 days. Provide customers with a truly risk-free shopping experience. If you have any problem, feel free to contact us..
Check Stock

Remflex 8001 Universal Exhaust Gasket, (Set of 2)

  • Universal 2-1/2” Collector Flange, 3 Bolt Holes, 3-1/32" Bolt Hole Spacing, 2/Set.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
  • Remflex exhaust gaskets fill those gaps permanently.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

Remflex 8003 Universal Exhaust Gasket, (Set of 2)

  • Universal 3-1/2” Collector Flange, 3 Bolt Holes, 3-25/32" Bolt Hole Spacing, 2/Set.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
  • Remflex exhaust gaskets fill those gaps permanently.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

Flanged Hex Head Bolts, Flange Bolts, Exhaust Manifold Bolt Kit M10X1.5-35mm 6-Pack

  • Aftermarket 03423 Exhaust Manifold Hardware Kit.
  • Stainless Steel construction provides strength and offers good.
  • The bolt kits are ideal for securing exhaust components and eliminating exhaust leaks.
  • Fits some Toyota,BWM,Lexus,Chevrolet models.Please check the size before purchasing.
Check Stock

Exhaust Manifold Bolt Repair Kit Compatible with 4.8 5.3 5.7 6.0 6.2 LS1 LS2 LS3 LS6 Chevy LSX Camaro, Corvette, Trans am, GTO, G8, CTS V, GM Trucks

  • This Exhaust Manifold Bolt Repair Kit was used to repair Driver's Side Rear and Passenger Side Front. We also selling Driver's Side Front and Passenger Side Rear. You can buy it at my store..
  • The Exhaust Manifold Bolt Repair Bracket will Eliminate exhaust noise and repair the exhaust leak without having to remove the cylinder head or drill out and replace the broken end bolts! Save your time and money..
  • Manufactured from high-quality Steel, TIG welding. For durablity and long service time. Kits comes with necessary block, bolts and washers for solid repair..
  • The Exhaust Manifold Bolt Repair Kit Compatible with L20, L31, L33, L59, L76, L77, L83, L86, L8T,L92, L94, L96, L98, L99, L9H, LC9, LFA, LH6, LH8, LM4, LM7, LMG, LQ4, LQ9, LR4,LS1, LS2, LS3, LS4, LS6, LS7, LS9, LSA, LSX376, LSX454, LSX454R, LT1, LT2, LT4,LT5, LY2, LY5, LY6, LZ1.(Fits for GM Vehicles, Silverado, Sierra, Yukon, Denali, Escalade, Hummer ).
  • If any issues from our products arise please don’t hesitate to contact us. We guarantee the quality of our tools and want to ensure you’re only getting the best. B....
Check Stock

Turbo Whistle (M, XL) | Universal Muffler Sound Booster | Aluminium Alloy Exhaust Whistle | Car Turbo Sound Whistle | Loud Exhaust Tips | Easy Installation

  • Car Turbo Sound Whistle: This gadget can simulate turbo sound of vehicles with turbo exhaust system, make your car sounds more powerful, it will make cool turbo noises while the airflow rushes through the exhaust pipe, great joke gift for your friends and families on birthday and holidays.
  • Easy Installation: It comes with L spanner and bolts, just need to loosen the bolt and tight it into the tailpipe of your exhaust pipe, then run the car, and it won't hurt your car exhaust pipe.
  • Universal Fit: This car exhaust sound booster fits most vehicles with straight exhaust pipe, such as cars, motorcycle, truck, dirt bike, scooter, motorbike, and more.
  • Premium Quality: This universal car turbo sound whistle is made of durable aluminium alloy, anti-rust and lightweight.
  • What You Get: 1 PC turbo exhaust whistle, 1 PC mini wrench, 1 PC screw, and our 24h customer after-sale service.
Check Stock

Tnuocke 2.0" Butt Joint Band Exhaust Seal Clamp Sleeve,50mm Stainless Steel Exhaust Sleeve Band for Exhaust Pipe, Muffler,Manifolds,Coupler H-031-50

  • Premiun Materials:The exhaust clamp is made from high quality stainless steel, stainless steel material, not easy to rust, corrosion-resistant,Precision-machined, shiny surface with no burr.
  • Prefect design:Distributes the clamping force evenly over the entire 360° to provide tight sealing and prevent leaks and prohibit exhaust pipe distortion.
  • Easy install:Put one of the nutbars on one side and insert the bolts, put another nut bar on, then screw the nuts, and connect.
  • Wide use:They are fit perfectly for exhaust tips, mufflers, cat back systems, racing exhaust.
  • Package:You will get 1 stainless steel Exhaust Band Clamp,The exhaust band clamp is reusable without damaging the pipes.
Check Stock

YHMTIVTU 2.1\ Quiet Baffle Exhaust Pipe Muffler Silencer Universal Fit for Motorcycles 1 Pair

  • Typically Reduce Sound Output by 2-3 db,Nice Aftermarket Replacement.
  • Dimension:7.75*2.1 Inch (Length*OD*),Pls Confirm the Inner Diameter of your Exhaust Pipe before Purchasing, Note: Not Fit for 2009 FXSTSSE.This Quiet Baffle is Hand-made and Wrapped in the Middle Part,pls Allow Minor Differences of the Measurement.
  • Quiet Baffle is Wraped by Silencer Cotton+Aluminum Foil ,it can be directly used on your bike,No Mounting Bolts Included.
  • Notes: It is recommended that new exhaust gaskets and a proper jet kit be installed when changing an exhaust system on a carburated motorcycle, or new exhaust gaskets and a digital fuel processor when changing an exhaust system on a fuel-injected motorcycle. Discoloration (bluing) is caused by tuning characteristics, like cam timing, carb jetting, etc., and is not caused by defective manufacturing..
Check Stock

EASYBERG 12PCS Turbocharger & Exhaust Manifolds Up-Pipe Bolts Fit for 2001-2016 Duramax Diesel

  • ▲2001 - 2016 Duramax diesel up-pipe bolt set (set of 12 bolts).
  • ▲12 point M10 bolts, grade 12.9 (160,000 psi tensile strength)..
  • ▲These bolts are used to attach the driver and passenger side up-pipes to the exhaust manifold and turbocharger flanges..
  • ▲ The OEM bolts should not be reused when replacing (or disconnecting) up-pipes as they lose their material properties and strength characteristics with age and heat exposure..
  • ▲They are extremely likely to break if reused and extraction is a tedious, time consuming process..
Check Stock