Top Exhaust Clamp Kit

2" Exhaust Clamps Narrow Band Muffler Seal Clamp Exhaust Tip, Exhaust Resonator, Exhaust Manifold, Exhaust Flex Pipe, Project Catalytic Converter Repair Stainless Steel 2.0 inch 2PCS

  • 【Application】Seal exhaust clamp is the muffler repair part, narrow strap clamp can be used for Catalytic Converter, Exhaust Tips, Exhaust Manifold, Exhaust Resonator, Exhaust Flex Pipe, Exhaust Muffler Repair Projects..
  • 【Function】The narrow band clamp adds the mild steel semi-circular gasket parts, it can hold the pipe tightly without loosening. Distributes the cla amping force evenly over the entire 360° to prevent leaks and control material distortion. Unique seal and high clamp loads are provided, without distorting your exhaust components, allowing the flexibility to disassemble for service..
  • 【Easy to Install】Easy and less time consuming to install or remove with one bolt. This exhaust clamp is adjustable, has been tested for strength, and is reusable without damaging the pipes..
  • 【Service】100% satisfaction guarantee, If you have any issues with the part , simply contact customer service for troubleshooting help, parts, replacement, or refund. Our aim is to make you satisfy the parts and the service we provide for you..
Check Stock

Roadformer 2.5 Butt Joint Exhaust Band Clamp - Aluminized Steel for 2.5 OD Exhaust Pipe Muffler Elbow and Exhaust Tubing Connection

  • PREMIUM QUALITY STANDARD – 2.5" butt joint exhaust clamp is made in high quality standard, this band clamp is used for 2.5" OD to 2.5" OD exhaust....
  • REAL SEALING CAPABILITY - Roadformer 2.5" exhaust band clamp is in 12.9 degree high-strength fastener providing real sealing capability of leak free.
  • INNOVATION TECHNOLOGY - Our Innovation reaction block technology offers great protection without exhaust ends be damaged when fastening, Pre-attached....
  • DURALITY & RELIABILITY - exhaust clamp band steel is tested over 100 hours salt spray to ensure the great performance in anti-corrosion with superior....
  • FULL CLAMPING AREA - Designed 360 degree full clamping area to create overall sealing force without distorting exhaust pipe, exhaust muffler ends and....
Check Stock

Roadformer 5 inch Exhaust Clamp - Lap Joint Exhaust Band Clamps Preformed Stainless Steel (2 Pack)

  • 5" exhaust clamp is to joint 5" OD overlapping into 5" ID. Stainless Steel Band in the width of 3 inch/76 mm, using 12.9 degree high-strength fasteners.
  • Lap joint exhaust clamp is fast, easy and accurate installation, and minimize noise and exhaust gas leak, protect exhaust ends from damaged when fastening.
  • The stepped band stainless steel is tested over 100 hours salt spray to ensure the great performance in anti-corrosion with superior product quality in durability and reliability.
  • Designed 360-degree full clamping area to create overall sealing without distorting exhaust pipe, exhaust muffler ends and exhaust tubing in exhaust system connections.
  • Exhaust clamp will come with plastic sticker to protect the band.
  • you can use with it or you can remove the protection sticker off before using.
Check Stock

Roadformer 2.5" Lap Joint Exhaust Band Clamp Preformed Aluminized Steel

  • Roadformer 2.5" exhaust clamp is to joint 2.5" OD pipe overlapping into 2.5" ID pipe. It is fast, easy and accurate installation, also minimize noise and exhaust gas leak. The lap joint Clamp is widely used in exhaust system of Automotive, Commercial Vehicle and off high way industry..
  • This stepped exhaust band clamp is made in high quality standard and using 12.9 degree high-strength fasteners to provide truly sealing force.
  • Designed 360-degree full clamping area to create overall sealing without distorting exhaust pipe, exhaust muffler ends and exhaust tubing in exhaust system connections.
  • Our Innovation reaction block technology offers great protection without exhaust ends be damaged when fastening. The band steel is tested over 100 hours salt spray to ensure the great performance in anti-corrosion with superior product quality in durability and reliability.
  • Roadformer is dedicated in providing real value to our customers and end users. We set industry quality standard.
Check Stock

SYKRSS 3 Stainless Steel Butt Joint Narrow Band Exhaust Seal Clamp with 1 Block

  • Application: Seal exhaust clamp is the muffler repair parts, narrow strap clamp can be used for Catalytic Converter, Exhaust Tips, Exhaust Manifold,....
  • Universal fitment, Joins 3.0" OD pipe to 3.0" ID pipe, There are 5 sizes for choose, it can meet your various needs. Please measure the size of your....
  • The narrow band clamp add the mild steel semi-circular gasket parts, it can hold the pipe tightly without loosening. The I-shape block again enhances....
  • Easy to remove and install, the exhaust band seal clamp chose the design of flexible bolt and nut structure. can easily disassemble and install them.....
  • SYKRSS value your shopping experience, If you encounter any problems in installing the 3.0" narrow band clamp, you can feel free to contact us via....
Check Stock

Roadformer 3' Butt Joint Exhaust Band Clamp - Aluminized Steel for 3' OD Exhaust Pipe, Muffler, Elbow and Exhaust Tubing Connection

  • PREMIUM QUALITY STANDARD – 3" butt joint exhaust clamp is made in high quality standard. This band clamp is used for 3" OD exhaust ends connection.
  • REAL SEALING CAPABILITY – Roadformer 3" exhaust band clamp is in 12.9 degree high-strength fastener providing real sealing capability of leak free.
  • INNOVATION TECHNOLOGY - Our Innovation reaction block technology offers great protection without exhaust ends be damaged when fastening, Pre-attached hardware provides fast, easy and accurate installation.
  • DURALITY & RELIABILITY - Roadformer clamps band steel is tested over 100 hours salt spray to ensure the great performance in anti-corrosion with superior product quality in durability and reliability.
  • FULL CLAMPING AREA - Designed 360 degree full clamping area to create overall sealing force without distorting exhaust pipe, exhaust muffler ends and exhaust tubing in exhaust system connections.
Check Stock

SEUNMUK 4 Pack 2.5 Inches Exhaust Clamp Sleeve, Stainless Steel Butt Joint Band Clamp Exhaust Coupler Exhaust Band Clamp Sleeve for 2.5-Inch OD Exhaust Pipes, Mufflers

  • ROBUST CONSTRUCTION - The stainless steel exhaust clamp is high-quality 304 stainless steel material, well polished with smooth mirror finish and high strength, which is solid and durable to last and can be reused for a long time..
  • EASY TO JOINT - No welding design, the joint exhaust band clamp features a practical components including bolts, nuts and I-block, you can easily mount or disassemble them, and you can also wrap some exhaust heat tape to enhance complete sealing..
  • TIGHT SEALING - Uniform distribution of clamping force will not crush the pipeline, which can provide tight seal and keep off exhaust and noise leakage. The exhaust band clamp sleeve can close fit on the exhaust pipes or mufflers..
  • PRACTICAL AND MULTIPURPOSE - 4 packs of joint exhaust muffler clamps is designed with 2.5-inch diameter and 3 inches length, which fits for exhaust pipes or mufflers, manifolds, catalytic converters of that with an outer diameter of 2.5 inches..
  • SATISFACTORY SHOPPING EXPERIENCE - If you have any dissatisfaction with exhaust clamp 2.5 inch, you will get a full refund within 30 days. If you have any questions about the product, please feel free to contact us, we will provide you with a satisfactory solution..
Check Stock

EVIL ENERGY 3 Lap Joint Exhaust Band Clamp Preformed 304 Stainless Steel

  • Joins 3.0 inch OD Pipe to 3.0 inch ID Pipe. Lap joint exhaust clamp is a simple, effective way to connect heavy-duty exhaust system components such as....
  • Connection Type: ID-OD slip fit connection, preferably with compression slit. This lap joint clamp commonly to join different size pipe..
  • Distributes the clamping force evenly over the entire 360° to provide tight sealing and prevent leaks and prohibit exhaust pipe distortion..
  • Material: 304 stainless steel strap, zinc-plated flange bolt and nut, steel gasket, aluminum alloy I-block. Lap Joint band clamp requires that the....
  • EVIL ENERGY provides stainless steel exhaust clamp 3-month warranty. We value your shopping experience and strive to offer a high-quality product and....
Check Stock

Floshine 2.5 in Lap Joint Band Clamps,Exhaust Muffler Clamp 4 PCS，2.5 Exhaust Pipe Clamps preformed Stainless Steel

  • Application--2.5" Exhaust clamps are a simple and quick tool for connecting exhaust system components, such as exhaust pipes, mufflers and catalytic Flexible disassembly and assembly methods allow maintenance while protecting the exhaust pipe from being twisted.
  • No welding design--This 2.5 exhaust clamp is tightly fitted 360° to evenly withstand tensile forces and prevent deformation and leakage of the exhaust pipe.No welding design of Lap joint exhaust sleeve clamp makes installation and removal easier and faster.
  • Component parts--304 stainless steel band,steel gasket,aluminum alloy I-block and zinc-plated flange bolt and nut.Make sure that the stainless steel surface is tight against the exhaust pipe and the nut is tightened when installing.
  • Non-rusting and corrosion resistant--Floshine Exhaust clamp is used for 2.5" OD to 2.5" OD exhaust pipe,mffler,catalytic converters connection.Stainless steel material has good corrosion resistance and is not easy to rust, providing a longer service life..
  • WARRANTY--Floshine offers a 5-month warranty and we are committed to enhancing the user experience.Please feel free to contact us with any questions about the product.
Check Stock

Portable AC Window Kit with Exhaust Hose Air Conditioners Kits Parts Adjustable Window Seals for Sliding Window Universal Vertical Sliding AC Vent Kit with 5.9” Round Coupler 59 Exhaust Hose Set

  • UNIVERSAL PORTABLE AC UNIT: The window side panels can be used for most brands portable air conditioners. It can be installed vertically and....
  • TWO LENGTH HOSE FOR YOUR AC VENT KIT: There are two sizes exhaust hose ac vent kit for your reference, one exhaust hose length is 59” for portable....
  • VERTICAL & HORIZONTAL USE: The window duct kit is suitable for most vertical and horizontal sliding windows. You can use a 2-plates combination,....
  • KEEP THE COOL& ENERGY SAVING: Embed the plates into the window track and clamp them to achieve a good sealing effect, which can keep your room cool in....
  • PACKAGE INCLUDED: 4 pieces window sealing plates, 1 piece exhaust hose adaptor, 5.9 inch diameter round coupler and screw accessories,1* sealing foam....
Check Stock

KEN BROWN 12 Inch Shutter Exhaust Fan Wall Mounted,Aluminum with 1.65 Meters Power Cord Kit,High Speed 1800CFM,Vent fan for Commercial,Greenhouse,Attic,Shed,Shop

  • MULTIPURPOSE:KEN BROWN 12 Inch Shutter Exhaust Fan is perfect for removing heat, moisture, dust and unpleasant odors from any residential,commercial, industrial or agricultural space.Ideal for use in home attic, workshops, welding rooms, factories, warehouses, barns, and greenhouses..
  • CORROSION RESISTANT:This 12 inch exhaust fan is made with high-grade aluminum shutters and blades which can withstand moisture and high temperature and provide longevity to the fan and prevent corrosive rust from forming..
  • AUTOMATIC ALUMINUM SHUTTERS:This wall mounted exhaust fan includes automatic gravity shutters that open and close with the operation of the fan..
  • Power Cord Kit Included: This Power Cord Kit is easy to install & includes a 3-foot strain relief clamp wire connectors & installation instructions. Simplify installation of your Ventilation Fan with this easy to use Universal extension cord power kit..
  • SUPERIOR AIRFLOW TRANSFER:You will enjoy the power and efficiency of KEN BROWN 12 inch shutter exhaust fan which runs 120 volts ,60Hz with 1650 rotations per minute,10.5M/S,cooling and ventilating an area of 1800 cubic feet per minute!This industrial grade shutter fan can solve all of your cooling and ventilation needs..
Check Stock

Roadformer 3 Lap Joint Exhaust Band Clamp Preformed Aluminized Steel

  • Roadformer 3" exhaust clamp is to joint 3" OD pipe overlapping into 3" ID pipe. It is fast, easy and accurate installation, also minimize noise and....
  • This stepped exhaust band clamp is made in high quality standard and using 12.9 degree high-strength fasteners to provide truly sealing force.
  • Designed 360-degree full clamping area to create overall sealing without distorting exhaust pipe, exhaust muffler ends and exhaust tubing in exhaust....
  • Our Innovation reaction block technology offers great protection without exhaust ends be damaged when fastening. The band steel is tested over 100....
  • Roadformer is dedicated in providing real value to our customers and end users. We set industry quality standard.
Check Stock