Top Exhaust Flange Bolt And Spring Kit

Universal T04E T3/T4 .57 A/R 57 Trim Turbo Charger Compressor 400+HP Boost Stage III Universal Turbocharger

  • Application: Perfect for 1.5L-2.5L engines.
  • Boost pressures are 7psi(.5 Bar) to 21psi(1.5 Bar).
  • Exhaust (Turbo Manifold) Flange: T3 T4 4 bolt Flange Patterns, Exhaust (Downpipe) Flange: Standard T3 5 bolt downpipe flange pattern.
  • Specification: [Compressor: Trim: 55/A/R: .5.
  • Professional installation is highly recommended (No Instruction Included).
Check Stock

Remflex (8053) OBX Exhaust Header Connector Gasket, (Set of 2)

  • 1-3/4 inch pipe, header tube connector flange, 4-into-2/2-into-1.
  • Bolt hole spacing: (A) 4-5/8 inch x (B) 3-1/4 inch.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten the flange bolts.
  • Remflex exhaust gaskets come in a standard 1/8 Inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 Inch.
Check Stock

BLACKHORSE-RACING 3 Inch 76mm Stainless Steel V Band Bolt Clamp with 2 Male Female Flanges for Turbo Pipes SS V-Band Flange Kit

  • ▲ 3 INCH STAINLESS STEEL EXHAUST CLAMP KIT – Complete V-band kit is ideal for performance exhaust systems, catback exhausts, turbo back exhausts and more..
  • ▲ COMPLETE 3 PIECE KIT – This complete 3inch Vband kit includes 1x 3″ V-Band clamp which is designed to accommodate the 2x stainless steel 3″ Vband flanges.
  • 1 male flange and 1 female flange. This allows for the flanges to properly align during installation to insure a leak free seal..
  • ▲ DESIGNED FOR 3″ EXHAUST PIPES – This kit is specifically designed for 3″ exhaust pipes. The flanges feature a recessed opening which allows for a 3″ exhaust to easily slip inside the flange, providing a perfect overlap seam for welding..
  • ▲ PERFECT FOR TURBO AND HIGH HORSEPOWER VEHICLES – If you’re making a catback exhaust, turbo back exhaust, mid pipe, or up pipe for your car, truck, or other vehicle this V-band kit is ideal for connecting different pipe sections. Conventional exhaust flanges multiple nuts, bolts, washers and a gasket. A V-band kit eliminates all of these and allows for a connection with a single nut..
  • ▲ EASY ON, EASY OFF – A V-band kit allows you to connect or disconnect sections of your exhaust by removing a single nut. Conventionally exhaust flanges involve multiple ....
Check Stock

Heavy Duty 2.5 Inch Muffer Clamps Exhaust 2 1/2 Stainless Steel U Bolt Clamp on Tip Pipes Connection

  • Package Includes: One Piece 2-1/2” stainless exhaust clamp. It is made of T201 stainless steel with heavy duty U-bolt saddle design..
  • The 2.5“ exhaust hanger on exhaust with reinforced ribs on the saddle flange, expertly crafted and durable construction for long service. The high....
  • The stainless clamp is consisted of u-bolt, saddle flange and 3/8 Nuts..
  • Please check the detail information as belows. We value your shopping experience and strive to offer high quality product with sincere service. If you....
Check Stock

Dorman 03114 Front Exhaust Flange Hardware Compatible with Select Subaru Models

  • Ideal replacement - the manifold bolt and spring match the fit and function of the original equipment hardware, including bolt diameter, thread pitch and head type.
  • Complete installation - this kit includes hardware required for securely attaching the manifold to the exhaust system.
  • Trustworthy construction - the kit's bolt and spring are made of hardened steel for durable, long-lasting service life.
  • Quality tested - kit components have undergone extensive testing to ensure proper function and long service life.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock

maXpeedingrods New GT25 GT28 GT2871 Turbo Charger 350BHP+ 0.64 A/R, GT2860 SR20 CA18DET 5-Bolt Flange Universal Turbocharger for 1.5L-2.0L Engine Water + Oil Cooled Turbo W/Gaskets

  • 【Application】：Universal for Turbo Manifold with T25 Flange(T28 Flange can be converted to T25 Flange, Adrapter is needed). Perfect for all 1.5L-2.0L engine.
  • 【Specification Size】Exhaust (Turbo Manifold) Flange: T25 4-Bolt Flange / Exhaust (Downpipe) Flange: 5-Bolt Flange.
  • 【Horse Power】: Boost Horse Power up to 350BHP.
  • 【Cooling Type】: Water and Oil Cooled. Oil Restrictor: Yes . [Oil Thread Size: M12*1.25 & Water Thread Size: M8*1.25].
  • 【Important Notice】:1. This Turbo is not vehicle specific. It is compatible with a wide range of applications therefore please check the specifications and verify compatibility prior to placing your order. 2. Some modification may be required, professional installation is highly recommended (No Instruction Included).
Check Stock

Dsnaduo 2-Bolt 3 Inch Exhaust Flange Connection Kit（Flange & Gasket) for Exhaust Turbo Downpipe Catback Headers Stainless Steel (77mm)

  • 2-Bolt Exhaust Flange Connection Kit Includes 1 Pcs Flange & 1 Pcs Gasket.
  • Hole Distance (B): 105~112mm, Sloted Hole.
Check Stock

Universal Turbo Turbocharger T3 T4 T04E A/R .50 A/R .63 V-band Oil 1.5-2.5L SCB

  • Exhaust (Downpipe) Flange: V-Band Flange.
  • Exhaust (Turbo Manifold) Flange: T3 T4 4 bolt Flange Patterns.
  • Horse Power: Boost Horse Power up to 420HP.
Check Stock

A-Team Performance - Hex Flange Bolts LS Exhaust Flange Manifold Header Zinc Plated - Compatible with GM Chevrolet Chevy LS1 LS3 LS2 LSX LT Engines 551696 Bolt Kit Only Silver

  • Hex Flange Bolts LS Exhaust Flange Manifold Header Zinc Plated.
  • Compatible with GM Chevrolet Chevy LS1 LS3 LS2 LSX LT Engines 551696 Bolt Kit Only Silver.
  • GM LS / LT Engines (Gen III, IV, V). USA Grade 10.9 with LS Exhaust Manifold Bolts.
  • Zinc-Plated and 350 Header Gasket Set with Bolts.
Check Stock

Jones Exhaust AHB2

  • 3.00 Inch Header Buddy Collector Kit 3.00 Inlet 2.25 Outlet 3 Bolt Flange Jones.
  • 2 Flanges 2 Collectors and 6 Nuts and Bolts Included.
  • HEADER BUDDY Is An Innovative, New Design For Header/Exhaust Assembly That Requires NO GASKET.
Check Stock

Dorman 03107 Front Manifold Stud and Spring Kit - M10-1.5 x 77mm Compatible with Select Chevrolet / GMC / Oldsmobile Models

  • Ideal replacement - the manifold bolt and spring match the fit and function of the original equipment hardware, including bolt diameter, thread pitch and head type.
  • Complete installation - this kit includes hardware required for securely attaching the manifold to the exhaust system.
  • Trustworthy construction - the kit's bolt and spring are made of hardened steel for durable, long-lasting service life.
  • Quality tested - kit components have undergone extensive testing to ensure proper function and long service life.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock

Dokili Exhaust Pipe Manifold Gasket Spring Rebuild Kit Fit for Polaris Ranger 700 800 Sportsman 600 700 2002-2007 Touring X2 2009 2010 2011 2012

  • Fits well, quality compares to OEM Harley flange..
  • Stainless Steel, Chrome Metallic Color exhaust flanges.
  • Specific dimension are all detailed, Includes 2 flanges, 2 exhaust gaskets, 2 retainer clips, and 4 acorn nuts.
  • Handmade Exhausts Flange Kit with Tapered Gaskets and Nuts , quality Harley exhaust flange gasket kit for almost Harley Davidson bikes except V-ROD.
Check Stock