Top Exhaust Header Collectors

Remflex 8003 Universal Exhaust Gasket, (Set of 2)

  • Universal 3-1/2” Collector Flange, 3 Bolt Holes, 3-25/32" Bolt Hole Spacing, 2/Set.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
  • Remflex exhaust gaskets fill those gaps permanently.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

Remflex 3003 Exhaust Gasket for Ford V8 Engine, (Set of 2)

  • 1-1/8 inch width x 1-1/2" height Stock Square Port.
  • Ford V8 - 302 ('81-'95), 351 ('69-'97) Windsor, 1-1/8" x 1-1/2" Square Port, Manifold or Headers, 2/Set.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
  • Remflex exhaust gaskets fill those gaps permanently.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

Remflex 2032 Exhaust Gasket for Chevy V8 Engine, (Set of 2)

  • 1-1/4 inch width x 1-5/8 inch height Oval Port.
  • Chevy V8 -Small Block 262 - 400, 1-1/4" x 1-5/8" Oval Port, For Raised Weld Bead Headers , 2/Set.
  • additional sealing material is provided around the weld bead to provide a better seal.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

Pirate Mfg Chrome Header 6Pt Head 16Pc Bolt Kit Compatible with BB Chevy BBC V8 396-454

  • Dynatech header flanges are of the highest quality for a great start to your exhaust header.
  • 1/4 thick and CNC laser cut for a clean transition from the cylinder head port to the header tube.
  • This is made of mild steel for a strong long-lasting construction.
  • A great exhaust system starts at the beginning - the flange and gaskets.
  • A big Dynatech advantage is the wide selection of port matched flanges.
Check Stock

Remflex 2004 Exhaust Gasket for Chevy V8 Engine, (Set of 2)

  • Chevy V8 - SB 262, 265, 267, 283, 302, 305, 307, 327, 350, 400, ('55 - '00), Round Port, Headers, 2/Set.
  • Port configuration comparable to Fel-Pro 1426.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
Check Stock

Remflex 2008 Exhaust Gasket for Chevy V8 Engine, (Set of 2)

  • Chevy V8 - 4.8L, 5.3L, 6.0L LS2 ('99-'08), 5.7L, LS1 LS6 ('97-'08), includes Vortec, Manifold or Headers, 2/Set.
  • Port configuration comparable to Fel-Pro 1440.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

Technicqll High Temperature 1200 C Adhesive Glue for Exhaust Fireplace Ovens Collectors 70 Ml

  • 1 x 70ml HIGH TEMPERATURE 1200'C ADHESIVE GLUE FOR REPAIRS OF EXHAUST SILENCERS & PIPES, COLLECTORS,.
  • FIREPLACES, OVENS etc - KIT INCLUDE A PIECE OF A HEAT RESISTANT MESH.
  • Fireproof silicate adhesive designed for assembly and repairs of exhaust systems.
  • collectors and exhaust silencers, ovens, fireplaces, and damaged ceramic and metallic ducts.
  • Resistant to fumes, dilute acids, water, chemicals and low temperature..
Check Stock

Stark Thermal Wrap 1\ Wide x 50' Long - Fiberglass Heat Shield Exhaust Manifold/Header Wrap - Yellow

  • Reduce up to 90% Radiant Heat - helps shield fuel lines, brake lines, wire looms and more from radiant heat.
  • Rated for 1350°F continuous, 2000°F intermittent. Always wear safety glasses, dust mask, gloves and long sleeves are recommended when handling this exhaust header wrap.
  • Fiberglass exhaust header wrap can create more horsepower and reduce under hood temperatures.
  • 1/16" x 1" x 50' Roll fiberglass exhaust heat wrap wiht 11-3/4" stainless ties (pack of 5).
  • Special weave makes it easier to wrap around bends, and gives carbon fiber look..
Check Stock

Stark Thermal Wrap 2\ Wide x 50' Long - Fiberglass Heat Shield Exhaust Manifold/Header Wrap - Yellow

  • Reduce up to 90% Radiant Heat - helps shield fuel lines, brake lines, wire looms and more from radiant heat.
  • Rated for 1350°F continuous, 2000°F intermittent. Always wear safety glasses, dust mask, gloves and long sleeves are recommended when handling this exhaust header wrap.
  • Fiberglass exhaust header wrap can create more horsepower and reduce under hood temperatures.
  • 1/16" x 2" x 50' Roll fiberglass exhaust heat wrap wiht 11-3/4" stainless ties (pack of 5).
  • Special weave makes it easier to wrap around bends, and gives carbon fiber look..
Check Stock

Remflex 2006 Exhaust Gasket for Chevy V8 Engine, (Set of 2)

  • 1-3/8 inch width x 1-1/2 inch width Square Port - Matches the Stock cast iron Head Port.
  • Chevy V8 - SB 262, 265, 267, 283, 302, 305, 307, 327, 350, 400, Stock Port, Manifold or Headers, 2/Set.
  • Port configuration comparable to Fel-Pro 1404.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
Check Stock

HZXHS Motorcycle Exhaust Muffler Mid Link Pipe for 890 Adventure 2021/890 Adventure R 2021/890 Adventure R Rally 2021

  • For 890 Adventure 2021 / For 890 Adventure R 2021 / For 890 Adventure R Rally 2021.
  • The engine exhaust pipe is 100% brand new and professionally manufactured. It has good performance in reducing exhaust noise and temperature..
  • The exhaust manifold is designed for drivers who require the highest performance of motorcycles. Fashionable design style..
  • Once combined with the Slip-On Line exhaust, this optional header offers a significant improvement in performance across the entire rev range. Made from perfectly formed 304 Stainless Steel the addition of this header increases throttle response and power control.
  • We provide professional after-sale service, if you have any quastion of our product, please feel free to contact us. We are professional motorcycle accessories sellers, if you need other motorcycle accessories, you are welcome to consult.
Check Stock

LEDAUT 2\x 50' Twill Weave Motorcycle ATV Titanium Exhaust Heat Shield Wrap with 11.8\ Locking Ties (Pack of 15)

  • Reduce up to 90% Radiant Heat - helps shield fuel lines, brake lines, wire looms and more from radiant heat.
  • Rated for 1350°F continuous, 2000°F intermittent. Always wear safety glasses, dust mask, gloves and long sleeves are recommended when handling this exhaust header wrap.
  • Fiberglass exhaust header wrap can create more horsepower and reduce under hood temperatures.
  • 1/16" x 1" x 50' Roll fiberglass exhaust heat wrap wiht 11-3/4" stainless ties (pack of 5).
  • Special weave makes it easier to wrap around bends, and gives carbon fiber look..
Check Stock