Top Exhaust Installation Kits

Floshine 8PCS DIY Stainless Steel 3 Exhaust Pipe Kit,Including Mandrel Bend Pipe & U-Bend & Straight Pipe,Universal Fit 3.0 Inch Exhaust System…

  • DIY Exhaust System–Four types of pipes totaling 16 pipes to meet your exhaust system renovation plans.
  • High-quality–Rust-proof steel and computerized mandrel bends deliver high strength and greater durability, and factory custom manufacturing provides stability and longer service life..
  • Products in the kit– 2 pcs 90°Pipes, 2 pcs straight pipe exhaust kit, 2 pcs 135°Pipes, 2 pcs 180° U-Bends.
  • Easy to installation–Each pipe is extended in diameter at one end to facilitate sliding installation of different pipes.Installation can be done with clamps or by welding.
  • Fitment–Exhaust Pipe Bender Universal fit for modifying the exhaust pipe for the 3.0 inch exhaust system, 16 pipes can be interconnected and cut to create your own exhaust system.
Check Stock

Ingersoll Rand 308B Air Straight Die Grinder, 1/4\

  • POWER: Motor delivers 0.33 HP (0.25 kW) and 25,000 rpm free speed..
  • Piped Away Exhaust Ready: These die grinders are compatible with “piped away” exhaust kits, so you can transfer exhaust away from you and your workspace..
  • DURABLE: Ball-bearing construction improves balance, reduces vibration, and ensures a longer life.
  • RELIABILITY: Integral safety-lock throttle lever prevents accidental start up..
  • LIGHTWEIGHT: At only 1lb., the ergonomic composite housing protects this tool from cold air and offers greater operator comfort..
  • Built-in lubricating wick increases angle gear life.
  • Rear exhaust directs air away from the operator.
  • Powerful motor delivers 0.33 HP (0.25 kW) and 25,000 rpm free speed.
  • Durable ball-bearing construction improves balance, reduces vibration, and ensures a longer life.
  • Strong aluminum housing withstands tough operating conditions.
  • Small and lightweight design provides easy operation greater access to tight spots.
  • Easy-to-use, integral safety-lock throttle lever prevents accidental start up.
Check Stock

Floshine 8PCS DIY Stainless Steel 2.25 Exhaust Pipe Kit,Including Mandrel Bend Pipe & U-Bend & Straight Pipe,Universal Fit 2.25 Inch Exhaust System

  • DIY Exhaust System--Four types of pipes totaling 16 pipes to meet your exhaust system renovation plans.
  • High-quality--Rust-proof steel and computerized mandrel bends deliver high strength and greater durability, and factory custom manufacturing provides stability and longer service life..
  • Products in the kit-- 2 pcs 90°Pipes, 2 pcs straight pipe exhaust kit, 2 pcs 135°Pipes, 2 pcs 180° U-Bends.
  • Easy to installation--Each pipe is extended in diameter at one end to facilitate sliding installation of different pipes.Installation can be done with clamps or by welding.
  • Fitment--Exhaust Pipe Bender Universal fit for modifying the exhaust pipe for the 2.5 inch exhaust system, 16 pipes can be interconnected and cut to create your own exhaust system.
Check Stock

ECOTRIC Gooseneck Trailer Hitch System Complete Underbed Kit Compatible with 1999-2016 Ford F250 F350

  • Compatible with 1999-2016 Ford F-250 & F-350 SUPER DUTY PICKUPS ONLY, WILL NOT FIT CAB & CHASSIS. Custom-fit under-bed mounting system..
  • Features: Allows full use of pick-up bed area when hauling cargo. Accommodates all standard vehicle suspensions with no alteration of OE exhaust systems. Rail kits are rated to match manufacturer's vehicle weight rating..
  • Specification: 2-5/16" high strength chrome plated ball standard, 3" ball optional. Rated for 30,000 lbs. gross trailer weight and 7,500 lbs. vertical load, tested to 30,000 lbs. gross vehicle weight rating. Weight Carrying: 7,500 lbs. (TW/GTW). Weight Distributing: 30,000 lbs. (TW/GTW).
  • Installation: Package includes all the hardware parts and instructions. Spring loaded safety chain loops included. Professional assembly is highly recommended..
  • Best Service: Provide technical support at any time.Please feel free to tell us what we can do for you,we will reply in one business day. 100% Customer Satisfaction Guaranteed from Order Placement through Installation..
Check Stock

HOW I FORGOT AND OVERCAME BROKEN HEART

  • Material:Made of stainless steel, anti-corrosive and durable,Exhaust tip surface polishing + color plating, exquisite workmanship, shiny bright and cool color of stainless steel electroplating process, can provide a smooth appearance for your car exhaust..
  • Installation:Exhaust silencers do not require replacement parts, no welding, no drilling, no professional installation, just fix the screws to the appropriate position of the exhaust pipe, which is a perfect replacement for old parts..
  • Features:After installation, it will enhance the hierarchy sense of your vehicles, full of elegant style,They Decorate the appearance of your car, make your car look new, and increase the style and sports effects, it is very suitable for your car..
  • DIY: Ideal car DIY, perfect substitute. The heart-shaped tail throat can also be given as a gift to family and friends. I believe it will bring surprises..
  • Compatibility:tailpipes are suitable for exhaust pipes with a diameter of 4cm-6.0cm / 1.57inch-2.36inch.Please measure the diameter of your pipe before buying..
Check Stock

3'' Custom Exhaust Kit Universal Mild Steel 16PCS Tubing Mandrel Bend Pipe Straight & U-Bend (2 PACKAGES SHIPPING))

  • Specification: 16-Gauge Piping Walls, Inlet / Outlet Size (IN) : 3″ OD.
  • Easy To Use: Slip Fit Joints to Provide Easiest Fabrication.
  • Universal Kit: 4 pcs 48″ Straight Pipes, 4 pcs 90 Degree Pipes, 4 pcs 45 Degree Pipes, 4 pcs 180 Degree U-Bends.
  • Sturdy Structure: Made of High Quality Mild Steel with Computerized Mandrel-Bends for Strength and Durability, i.e. Maximizing Smoothest High Exhaust Air Flow Rate.
  • DIY Custom: These Exhaust Bend Kits Include Enough Tubing To Allow You To Run Your Own Exhaust System The Way You Want It.
Check Stock

Gulrear Portable AC Window Vent kit,Universal Portable Air Conditioner Window Kit with 3 Adjustable Slide Seal Plates and 5.0" Hose Adapter Adjust Length from 25.5" to 47" Sliding Window AC Vent Kit…

  • ... 【Easy set-up】This portable air conditioner window kit was easy to extend to your window needs, These panels are easy to adjust with the slider nuts.The Window seal kit can be shortened or lengthened for the desired fit AND works with both vertical and horizontal sash windows. Installation couldn't be easier - simply slot, slide and lock into place!ac window kit is the perfect solution for efficient use of your portable AC..
  • 【Verify Outlet Diameter】Please Note: Portable Air Conditioner Include a Air Exhaust Outlet on the Back of AC.The Exhaust Hose Cut-Outs Are Approximately 5.0" in diameter.So Make Sure to Check The Diameter of Your AC Air Intake Outlet and Air Exhaust Outlet is 5.0 inch Before Purchasing.(Inner Edge To Inner Edge).
  • 【Package Includes】air conditioner parts & accessories Kit for Portable A/C Includes: 2 x 43cm/16.9 Inch Outer Plates, 1x 43cm/16.9 Inch Inner Plates, 1 x Exhaust Hose Adaptor(5.0inch/13cm,Internal Edge To Internal Edge),1 x Sealing Tape, 4 x Butterfly Screws,1 x User Manual. You Connect Them By Using The Provided Butterfly Screws..
Check Stock

JWWY Stainless Steel Exhaust Muffler Tail Pipe Trim Cover for 2015-2022 Dodge Charger Exterior Accessories

  • Package: There are two pieces of 2.5 inches inlet exhaust tips in the package..
  • Specifications: The Apeixoto exhaust tailpipe tip has a standard 2.5’’ x 4’’x 9’’ dimension ( Inlet, Outlet and Length ). Please note that this tailpipe tip is only fit for the vehicles that is a 2.5 inches diameter inlet exhaust pipes..
  • Material: The Apeixoto exhaust tailpipe tip is constructed with 304 stainless steel. It has a much more shinny and beautiful surface. There is a blue burnt end on the tip. It looks very fashionable and powerful. This types of stainless steel also is rust and corrosion resistant. It will keep your vehicle always in a good look..
  • Installation: Please be noted that these tailpipes are weld on designed. A professional installation would be recommended. Good installation will make the tailpipe function better..
  • Warranty: 100% satisfaction. If you come across any issue or need any help for our Apeixoto exhaust tailpipe tip, feel free to ask and we are here to assists..
Check Stock

UPOWER 3" Inlet&Outlet Exhaust Resonator,16" Overall Length Center Straight Through Stainless Steel Muffler,Polished

  • ... PERFORMANCE: The 3 inch inlet resonator muffler is made of high quality stainless steel and used CRF (Continuous Roving Fiberglass) technology, which can absorbs unwanted interior resonance and produces a low, deep tone. Brushed finish for good looking..
  • INSTALLATION: 100% welded design performance resonator for long-lasting durability. Installation instructions are not included, professional installation is highly recommend..
  • WARRANTY: Upower provides 365-days warranty for each resonator muffler. Before purchasing, please make sure the Brand Logo is "Upower"..
Check Stock

DNA MOTORING ZTL-30RAW 16 Pcs 3 Inches Mild Steel DIY Custom Mandrel Exhaust Pipe Straight & U Bend Tube Kit,Universal Fit

  • Specification: 16-Gauge Piping Walls, Inlet / Outlet Size (IN) : 3″ OD.
  • Easy To Use: Slip Fit Joints to Provide Easiest Fabrication.
  • Universal Kit: 4 pcs 48″ Straight Pipes, 4 pcs 90 Degree Pipes, 4 pcs 45 Degree Pipes, 4 pcs 180 Degree U-Bends.
  • Sturdy Structure: Made of High Quality Mild Steel with Computerized Mandrel-Bends for Strength and Durability, i.e. Maximizing Smoothest High Exhaust Air Flow Rate.
  • DIY Custom: These Exhaust Bend Kits Include Enough Tubing To Allow You To Run Your Own Exhaust System The Way You Want It.
Check Stock

Car Accessories Heart Shaped Universal Car Exhaust Muffler Tip Stainless Steel Pipe Chrome Exhaust Tail Muffler Tip Pipe

  • Material:Made of stainless steel, anti-corrosive and durable,Exhaust tip surface polishing + color plating, exquisite workmanship, shiny bright and cool color of stainless steel electroplating process, can provide a smooth appearance for your car exhaust..
  • Installation:Exhaust silencers do not require replacement parts, no welding, no drilling, no professional installation, just fix the screws to the appropriate position of the exhaust pipe, which is a perfect replacement for old parts..
  • Features:After installation, it will enhance the hierarchy sense of your vehicles, full of elegant style,They Decorate the appearance of your car, make your car look new, and increase the style and sports effects, it is very suitable for your car..
  • DIY: Ideal car DIY, perfect substitute. The heart-shaped tail throat can also be given as a gift to family and friends. I believe it will bring surprises..
  • Compatibility:tailpipes are suitable for exhaust pipes with a diameter of 4cm-6.0cm / 1.57inch-2.36inch.Please measure the diameter of your pipe before buying..
Check Stock

2 Pieces Titanium Black Chrome Muffler Exhaust Tip Finisher Compatible with 2016-2021 Honda Civic

  • Fits 2012-2020 Honda Civic With OEM Exhaust System. Will Not Fit Hatchback Sport or Si Model. Exhaust May Need to be Adjusted For Installation..
  • Package Includes 2 x Exhaust Pipe Tip Cover as Shown. Quantity 1 Means 1 Pair of Tips.
  • Made Of Stainless Steel Material In Titanium Gunmetal Finish.
  • Easy Installation- Direct Bolt-On To OEM Exhaust With Adjustable Screws. Simply Slide in and Tighten up the Screw..
  • Dramatically Enhance The Rear Appearance of your Car. Gives it a Sport Tone Right Away..
Check Stock