Top Exhaust Manifolds

RH & LH Exhaust Manifolds Upgrade For 01-15 6.6L Duramax Diesel

  • Both Driver & Passenger Side Exhaust Manifolds With Gaskets.
Check Stock

Pyro-Putty 2400

  • Repairs Manifolds, Headers, Exhaust Pipes, Mufflers & More.
  • Can be applied up to 3/8" thick. Air sets in 2-4 hours..
Check Stock

Dayco 63525 Garage Exhaust Hose

  • Automotive replacement exhaust manifolds.
  • package dimensions :36.86" L x 15.02" W x 9.47" H.
Check Stock

UANOFCN 1998 and Up Exhaust Y-Pipe Kit Replaces 807166A1 Hose Bellows 32-14358T 32-44348T for Mercruiser

  • We ship from the USA, it is fast and guaranteed..
  • Replaces 807166A1 Water Shutters / Flappers 32-14358 , 32-14358T , 32-14358001 , 18-2746 Lower Exhaust Bellows , Tube , Hose，Clamp.
  • Also Replaces 32-44348 , 32-44348T , 32-44348001 , 18-2748 Upper Exhaust Bellows , Tube , Hose，Clamp.
  • Note: These will not work on V6 engines that came with the one piece manifolds ( use 807166A2 it has a flat tip ) , or early V8 with the round pin....
  • 100% Brand New With High Quality.Cooperated with local workshop, quality is guaranteed..
Check Stock

COMP Cams CL12-235-2 Xtreme 4x4 210/218 Hydraulic Flat Cam and Lifter Kit for Chevrolet Small Block

  • Strong low end and mid-range torque, good idle..
  • 210/218 Duration at .050". 111 Degree Lobe Separation Angle. 0.447"/0.462" Valve Lift.
  • CL Kits include a camshaft, a set of lifters, instructions and assembly lubricant..
  • Designed for use with common restrictive factory exhaust systems, including OEM exhaust manifolds..
  • Improved throttle response and increased low and mid-range RPM horsepower for towing and off-road..
  • Fits Chevrolet GEN 1 Small Blocks including the 262, 265, 267, 283, 302, 305, 307, 327, 350 and 400. Does not fit LT1/LT4, or factory roller Small Blocks built from 1985 and newer..
Check Stock

Permatex 81878 Ultra Copper Maximum Temperature RTV Silicone Gasket Maker, 3 oz. Tube

  • Most advanced, high temp RTV silicone gasket available.
  • Three times more oil resistant than conventional silicones.
  • eight times more flexible than cut gaskets.
  • Sensor-safe, low odor, and non-corrosive with superior adhesion.
  • Temperature range -75F to 700F intermittent.
  • Suggested Applications: Exhaust manifolds/headers, valve covers, oil pans, timing covers, water pumps, thermostat housings.
Check Stock

Permatex 80335-12PK Muffler and Tailpipe Sealer 3 oz Pack of 12 Black

  • Most advanced, high temp RTV silicone gasket available.
  • Three times more oil resistant than conventional silicones.
  • eight times more flexible than cut gaskets.
  • Sensor-safe, low odor, and non-corrosive with superior adhesion.
  • Temperature range -75F to 700F intermittent.
  • Suggested Applications: Exhaust manifolds/headers, valve covers, oil pans, timing covers, water pumps, thermostat housings.
Check Stock

GLM Cast Iron Exhaust Manifold for Mercruiser 4.3 V6 Engines 1983-2002 Replaces Part Numbers 99745 99746 99746A8 99746A17

  • Cast Iron Exhaust Manifold for Mercruiser 4.3 V6 engines from 1983 to 2002. Replaces MerCruiser part numbers 99745, 99746, 99746A8, 99746A17.
  • Includes gaskets, plugs, drain elbow, and blue drain plug. Left and right are the same. Does not fit newer dry-joint manifolds (2002 and newer).
  • 100% Leak Tested. Uniform wall thickness. Clean exhaust passages. Shot peened for smooth external finish. All mounting surfaces CNC machined to....
  • GLM Marine, has catapulted to the forefront in manifold technology by incorporating improvements in design, manufacturing, quality assurance, fault....
  • For over 32 years now, GLM has committed itself to producing high quality and cost effective aftermarket marine products. From superior quality....
Check Stock

J-B Weld ExhaustWeld 2\ x 72\ Repair Wrap

  • J-B WELD EXHAUSTWELD: A high strength fiberglass wrap, impregnated with a specially formulated resin for high temperature resistant repairs. ExhaustWeld can resist up to 1100°F once it is fully cured!.
  • CURE AND SET TIME: ExhaustWeld can cure with or without heat! It will cure within 20 minutes if heat is applied to it with either a heat gun or by letting the engine run. Without heat, ExhaustWeld will set in 20 minutes and cure in 2 hours..
  • HIGH HEAT RESISTANCE: Once fully cured, J-B Weld ExhaustWeld Exhaust System Repair Wrap has a temperature resistance of 1100°F, allowing it to be used on every part of the exhaust system!.
  • APPLICATIONS: Manifolds, Catalytic Converters, Mufflers, Tailpipes and more!.
  • EVERYTHING YOU NEED: The kit includes a pair of gloves and a .5" x 24" piece of aluminum tape!.
  • DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond..
Check Stock

Dorman 674-939 Exhaust Manifold for Select Pontiac / Toyota Models

  • Ideal replacement - this exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the stock manifold on specified vehicles.
  • Reliable construction - durable materials resist warping, cracking and leaking for long-lasting performance.
  • Complete repair - includes all necessary gaskets and downpipe hardware.
  • Trustworthy design - built by industry leader in aftermarket manifolds.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock

Vortec LS Single T4 Turbo Kit Complete Silverado Sierra Turbocharger V8 LS 4.8 5.3 6.0 62

  • OEM quality cast exhaust manifolds and downpipes.
  • Mandrel bent TIG welded aluminum intake piping.
  • Bar and plate front mount intercooler with brackets.
  • Complete braided SS -AN oil lines w/feed adapter All vacuum lines, pcv system, check valves, clamps, etc etc etc included.
Check Stock

Dorman 674-922 Driver Side Exhaust Manifold Compatible with Select Models

  • Ideal replacement - this exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the stock manifold on....
  • Reliable construction - durable materials resist warping, cracking and leaking for long-lasting performance.
  • Complete repair - includes all necessary gaskets and downpipe hardware.
  • Trustworthy design - built by industry leader in aftermarket manifolds.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock