Top Exhaust Pipe Flange

Remflex 8003 Universal Exhaust Gasket, (Set of 2)

  • Universal 3-1/2” Collector Flange, 3 Bolt Holes, 3-25/32" Bolt Hole Spacing, 2/Set.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
  • Remflex exhaust gaskets fill those gaps permanently.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

EVIL ENERGY 2.75 Inch 2 3/4 Butt Joint Exhaust Band Clamp Sleeve Stainless Steel 2pcs

  • Joins 2.75" OD pipe to 2.75" OD pipe. Butt joint band 2.75" exhaust clamp is a simple, effective way to connect heavy-duty exhaust system components....
  • Exhaust coupler clamps are serviceable, durability and reusable. Aslo can be used to repair exhaust pipes. Wrap some exhaust heat tape on the exhaust....
  • Distributes the clamping force evenly over the entire 360° to provide tight sealing and prevent leaks and prohibit exhaust pipe distortion. No....
  • Material: 304 stainless steel band, zinc-plated flange bolt and nut, steel gasket, aluminum alloy I-block. Note: There is a flat face and arc curved....
  • EVIL ENERGY provide stainless steel exhaust clamp 3-month warranty. We value your shopping experience and strive to offer a high-quality product and....
Check Stock

EVIL ENERGY 3 Lap Joint Exhaust Band Clamp Preformed 304 Stainless Steel

  • Joins 3.0 inch OD Pipe to 3.0 inch ID Pipe. Lap joint exhaust clamp is a simple, effective way to connect heavy-duty exhaust system components such as....
  • Connection Type: ID-OD slip fit connection, preferably with compression slit. This lap joint clamp commonly to join different size pipe..
  • Distributes the clamping force evenly over the entire 360° to provide tight sealing and prevent leaks and prohibit exhaust pipe distortion..
  • Material: 304 stainless steel strap, zinc-plated flange bolt and nut, steel gasket, aluminum alloy I-block. Lap Joint band clamp requires that the....
  • EVIL ENERGY provides stainless steel exhaust clamp 3-month warranty. We value your shopping experience and strive to offer a high-quality product and....
Check Stock

Exhaust Spring Bolt Flange,Exhaust Flange Bolts Quick Fix Exhaust Flange Exhaust Flange Spring Bolt Repair Pipe Kit Quick Fix 2.25In Id To 2.25In Od Universal Stainless Steel Exhaust Flange Repai

  • Excellent Quality: Universal Exhaust Flange is Made of high quality stainless steel material for perfect durability and strength, not easy to deform, has long service life..
  • Professional Design: 2.25in ID to 2.25in OD exhaust spring bolt flange, used for connection between pipe ends..
Check Stock

Floshine 2.5 in Lap Joint Band Clamps,Exhaust Muffler Clamp 4 PCS，2.5 Exhaust Pipe Clamps preformed Stainless Steel

  • Application--2.5" Exhaust clamps are a simple and quick tool for connecting exhaust system components, such as exhaust pipes, mufflers and catalytic Flexible disassembly and assembly methods allow maintenance while protecting the exhaust pipe from being twisted.
  • No welding design--This 2.5 exhaust clamp is tightly fitted 360° to evenly withstand tensile forces and prevent deformation and leakage of the exhaust pipe.No welding design of Lap joint exhaust sleeve clamp makes installation and removal easier and faster.
  • Component parts--304 stainless steel band,steel gasket,aluminum alloy I-block and zinc-plated flange bolt and nut.Make sure that the stainless steel surface is tight against the exhaust pipe and the nut is tightened when installing.
  • Non-rusting and corrosion resistant--Floshine Exhaust clamp is used for 2.5" OD to 2.5" OD exhaust pipe,mffler,catalytic converters connection.Stainless steel material has good corrosion resistance and is not easy to rust, providing a longer service life..
  • WARRANTY--Floshine offers a 5-month warranty and we are committed to enhancing the user experience.Please feel free to contact us with any questions about the product.
Check Stock

2 Inch Exhaust Flange Universal Flat Oval Split Repair Exhaust Flange Replacement Accessory

  • Fitment: Universal for most of motocycle. Please compare your parts with the pictures before purchasing an item..
  • Applied High Quality Material: Exhaust flange made with steel which ensures that it has not easy to crack, anti-acid and alkali, light, wear resistant....
  • Easy to Install: Just attach it to your flared pipe and connect the bolt to the existing flange that needs to be connected..
  • Note: It do not require welding or cutting of your exhaust pipe to apply..
  • Service Guarantee: Excellent quality Service, fast delivery, simple after-sales.We promise satisfaction guarantee as we can.If you have any....
Check Stock

Remflex (8053) OBX Exhaust Header Connector Gasket, (Set of 2)

  • 1-3/4 inch pipe, header tube connector flange, 4-into-2/2-into-1.
  • Bolt hole spacing: (A) 4-5/8 inch x (B) 3-1/4 inch.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten the flange bolts.
  • Remflex exhaust gaskets come in a standard 1/8 Inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 Inch.
Check Stock

EVIL ENERGY 2.25' 2 1/4 Lap Joint Exhaust Band Clamp Exhaust Repair Preformed 304 Stainless Steel 2pcs

  • Joins 2.25 inch OD Pipe to 2.25 inch ID Pipe. Lap joint exhaust clamp is a simple, effective way to connect heavy-duty exhaust system components such as pipes, muffler and catalytic converters. Width of strap: 2.94inch (74.8mm). Torque: 63 N·m. Package: 2pcs..
  • Connection Type: ID-OD slip fit connection, preferably with compression slit. This lap joint clamp commonly to join different size pipe..
  • Distributes the clamping force evenly over the entire 360° to provide tight sealing and prevent leaks and prohibit exhaust pipe distortion..
  • Material: 304 stainless steel strap, zinc-plated flange bolt and nut, steel gasket, aluminum alloy I-block. Lap Joint band clamp requires that the sections being clamped have sufficient lengths of straight pipe leading into it. It is removable and reusable, easy to install without welding..
  • EVIL ENERGY provides stainless steel exhaust clamp 3-month warranty. We value your shopping experience and strive to offer a high-quality product and service..
Check Stock

HG POWER 6 Inch Duct Connector Flange ABS Straight Pipe Flange Air Duct Hose Connector for 6\ Duct Pipe Ventilation HVAC Ducting

  • ◆GOOD QUALITY: Made of high-quality ABS plastic, perfect for the 6-inch pipe. (Note: This fits inside the pipe, not around (or over) the pipe.).
  • ◆WIDE APPLICATION: Suitable for the duct ventilation system, for conveyor drum dryers, bathroom or kitchen exhaust fans, hydroponic, in-line extract fans, or range hoods..
  • ◆EASY INSTALLATION: Simple to connect the flange with the pipe by screwing tightly. (Beware to protect your hands from damage.).
  • ◆DECORATION: Great and beautiful black round flange makes it perfect for everywhere it is installed..
  • ◆WHAT YOU GET: We have worry-free 12-month and friendly customer service. If there are any problems, feel free to contact us, please. We will reply immediately in 24 hours..
Check Stock

Vent Systems Air Vent Duct Connector Flange Straight Ventilation Pipe Plastic Ducting Connector Plate for Cooling Heating Ventilation System 8 inches B

  • --High quality-This is our new black 4-inch pipe plastic connector flange for heating and cooling ventilation systems. Used to connect the pipe hose....
  • --Rugged and durable – Our 4-inch flange connectors are made of ABS plastic. This is a high-quality material, known for its toughness and resistance....
  • -Wide range of applications-Our pipe flanges to wall-mounted dryer vents are ideal for piping your tumble dryer, bathroom or kitchen exhaust fans and....
  • --Quick installation-Our 4-inch pipe collar has pre-drilled mounting holes for easy and quick installation. Use 4 M3/M3.5 screws to mount our 4-inch....
  • --Secure Fit-By using our plastic flanges, you can obtain an airtight seal to prevent any cold or hot air from entering your home, thereby reducing....
Check Stock

WATERWICH Compatible with Catalytic Converter Nissan Altima 2.5L Sedan 2002 2003 2004 2005 2006 Direct-Fit Stainless Steel High Flow EPA Compliant

  • [ COMPATIBLE VEHICLES] - Compatible with Nissan Altima Base Sedan 4-Door 2.5L 2002-2006(Except 2005).
  • Compatible with Nissan Altima S Sedan 4-Door....
  • [ Direct Fit Design] - Flange to Flange Design, Direct Fit Design Bolts to Existing Exhaust without doing extra modification. And comes with gasket....
  • [Designed] - This is new OE fit catalytic converter. Outer shell Made from heavy-duty stainless steel construction for maximum durability. The....
  • [FUNCTION] - It is installed in the exhaust pipe of the engine. Through oxidation reaction, reduction reaction, water-based gas reaction and water....
  • [NOTE ] - Federal EPA compliant Appproved, Not for CA&NY(Non CARB compliant, Not legal for use on vehicles required to meet California emission....
Check Stock

Remflex 8053 OBX Exhaust Header Connector Gasket Set of 2 Model 8053 Outdoor&Repair Store

  • 1-3/4 inch pipe, header tube connector flange, 4-into-2/2-into-1.
  • Bolt hole spacing: (A) 4-5/8 inch x (B) 3-1/4 inch.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not.
  • Remflex exhaust gaskets come in a standard 1/8 Inch thickness and are designed to crush 50 percent.
Check Stock