Top Exhaust Tailpipe Extension

4 inch Inlet Diesel Truck Tailtip, 8 inch Outlet Exhaust Tip, 15 inch Length Muffler Tip, Rolled End Angle Cut

  • Dimension: standard 4" x 8" x 15"(inlet, outlet and overall length).
  • ONLY universal fit for vehicles with 4-inch outside diameter exhaust pipes (Notice: Please make sure the Outside Diameter of your vehicle tailpipe outlet is 4.0" before purchase).
  • Anti-deformation & rustproof: built from high-grade stainless steel, our exhaust tips effectively resist heat, rust and deformation to protect & decorate your tailpipe system well.
  • plus, a drainage hole helps drain water to prevent rust.
  • Stylish & pleasant-sounding: sleek degree rolled-edge angle cut and thicker inner wall design, make your car sounds rumble and crackle for a more powerful and unique sound, meanwhile, the chrome-plated and polished finish would make your car tailpipe shine brightly.
  • Easy installation: the bolt-on design makes it super easy to fasten to your exhaust pipe with M8 Allen Key, no drilling or welding needed.
  • Daily Maintenance: To make this exhaust tip has a long-life service - Please Sweep away the welding debris, cement, oil, white ash, putty, sand ash regularly to keep the surface clean. We recommend to do above action once a month (NOTE: Professional installation would be highly recommended).
Check Stock

3 inch Exhaust Tip, MONOKING Black Exhaust Tip 3 inch Inlet Stainless Steel Clamp On Tailpipes for Truck Car 3″ Inlet 4″ Outlet 12″ Long

  • EXHAUST TIP 3 inch inlet -Universal fits 3” Outer diameter tailpipe. NOT fit 3” Inner diameter pipe. 3″ inlet diameter, 4″ outlet diameter, 12″ overall length. If your tailpipe has a 3” OUTER diameter it will fit perfectly.
  • POWERFUL SOUND – 3 inch Exhaust Tips improved powerful sound and distinctive style. 20 Degree of the angle end, slant cut design, Classic Black exterior improved appearance of your tailpipes. Made your car will seem skin to a sports car or at least a car with a modified engine.
  • DURABLE MATERIAL- 3in Exhaust Tip made from Sturdy 304 Stainless Steel not easy to fall off, also avoid rusting and deformation. A small hole on bottom of tip to drain water smoothly, avoid rusting.
  • CLAMP ON INSTALL – Holds up long time! Well thought out clamping mounting. It takes only 2 minutes easy to install. No welding or drilling is needed, just slide the tip into place on the tailpipe and clamps down tightly by tightening screws with a 6mm allen wrench.If you think it isn’t tight enough, additional welding will be a nice safeguard.
  • PACKAGE CONTENT – Package comes with 1x Exhaust Tip 3 inch inlet. MONOKING Universal black Exhaust Tips 3 inch inlet enjoy 1 YEAR warranty plus lifetime tech support and customer service. Ship from U.S. and....
Check Stock

Autarboor Exhaust Tip 3 Inch Inlet, 3' Inlet 4' Outlet 12' Long Mirror Polish Stainless Steel Bolt-On Exhaust Tailpipe Tip Slant Cut, Rolled Edge

  • 【Dimension】 Standard with 3 inch Inlet, 4 inch outlet, 12 inch overall length, bolt-on exhaust tips. Universally applicable to vehicles with 3 inch outer diameter of exhaust pipe..
  • 【Special Design】With elaborately mirror polished to keep your vehicle look cool style and new shiny look instead of the rusted old tailpipe. Slant cut design can drain your exhaust tailpipe timely.
  • 【High-grade Material】Made of high quality material stainless steel, strong anti-corrosive, durable exhaust tip, can greatly protect your original pipe from the sun and rain, avoid rusting and deformation.
  • 【Easy installation】Bolt-On exhaust tip don’t require welding or drilling operations, just simply slide the exhaust tip into the exhaust pipe and tighten it with a wrench.
  • 【Warranty】12 months warranty: Feel free to contact our customer service if you have any problem with our product.
Check Stock

Dsycar Universal Stainless Steel 1.5 - 2.25 Inlet Exhaust Tip - Fit Pipes Diameter 1.5 - 2.25 inch Adjustable Car Decoration Chrome-Plated Finish Exhaust Tailpipe Tip 3.3 Outlet 5.4 Long

  • 【 Measure Your Tailpipe Diameter】Please measure the outside diameter of your exhaust pipe before purchase, otherwise our product will not fit your....
  • 【 Note 2 】Please check your original tailpipe's type. Straight tailpipe is for straight type, and curved tailpipe is for curved type..
  • 【 Note 3 】View product details image,Understand the installation and size of the product, can view the other seven exhaust pipe products,Choose....
  • 【Easy to Install】 There is no need to replace any parts,No weld needed. No drill needed.Super Easy to Install! Three Bolt Fit the tip to your....
  • 【Car Decoration】Surface polishing process. The most important thing for us is that you 100% love your purchase. Tips again, please measure your....
Check Stock

Stainless Steel Car Exhaust Tip, 5.5″ Universal Exhaust Pipe, Modification Tail Throat Tail Pipe, Steel Exhaust Tips Chrome Plated Finish Tailpipe, Replacement Accessory for All Cars (Blue/Bend)

  • 【High Quality】: This exhaust pipe is made of high quality stainless steel with a smooth and hard surface, does not deform easily. Compared with other pipes which is prone to rust, this one can use for a long time. The tailpipe is designed with rounded and smooth edges, which is not easy to scratch when installed. The edges are thick and curved, and the appearance is sleek and fresh, making your car look more luxurious..
  • 【Stylish Decoration】: This car exhaust tip has a stylish design and is not only exquisitely made, but also has a polished and baked blue surface with attractive colors in the sunlight. It is a perfect vehicle decoration. It adds a personal touch to your car, making it even more unique compared to other cars. It also protects your exhaust pipes from rain and dust..
  • 【Protect Your Exhaust Tip】: This product is installed to prevent deformation and oxidation of the exhaust pipe. Each of our stainless steel chrome muffler tip has a small drain hole at the bottom of the tip to prevent water buildup. And it is a nice sound modifier. This tip is very easy to install, built of high quality material, and looks cool with long service life..
  • 【Easy to Install】: The installation is easy for you. Using the screw connection method, loosen....
Check Stock

Stainless Steel Car Exhaust Tip, 5.5" Universal Exhaust Pipe, Modification Tail Throat Tail Pipe, Steel Exhaust Tips Chrome Plated Finish Tailpipe, Replacement Accessory for All Cars (Black/Straight)

  • 【High Quality】: This exhaust pipe is made of high quality stainless steel with a smooth and hard surface, does not deform easily. Compared with other pipes which is prone to rust, this one can use for a long time. The tailpipe is designed with rounded and smooth edges, which is not easy to scratch when installed. The edges are thick and curved, and the appearance is sleek and fresh, making your car look more luxurious..
  • 【Stylish Decoration】: This car exhaust tip has a stylish design and is not only exquisitely made, but also has a polished and baked blue surface with attractive colors in the sunlight. It is a perfect vehicle decoration. It adds a personal touch to your car, making it even more unique compared to other cars. It also protects your exhaust pipes from rain and dust..
  • 【Protect Your Exhaust Tip】: This product is installed to prevent deformation and oxidation of the exhaust pipe. Each of our stainless steel chrome muffler tip has a small drain hole at the bottom of the tip to prevent water buildup. And it is a nice sound modifier. This tip is very easy to install, built of high quality material, and looks cool with long service life..
  • 【Easy to Install】: The installation is easy for you. Using the screw connection method, loosen....
Check Stock

Stainless Steel Car Exhaust Tip, 5.5" Universal Exhaust Pipe, Modification Tail Throat Tail Pipe, Steel Exhaust Tips Chrome Plated Finish Tailpipe, Replacement Accessory for All Cars (Silver/Straight)

  • 【High Quality】: This exhaust pipe is made of high quality stainless steel with a smooth and hard surface, does not deform easily. Compared with other pipes which is prone to rust, this one can use for a long time. The tailpipe is designed with rounded and smooth edges, which is not easy to scratch when installed. The edges are thick and curved, and the appearance is sleek and fresh, making your car look more luxurious..
  • 【Stylish Decoration】: This car exhaust tip has a stylish design and is not only exquisitely made, but also has a polished and baked blue surface with attractive colors in the sunlight. It is a perfect vehicle decoration. It adds a personal touch to your car, making it even more unique compared to other cars. It also protects your exhaust pipes from rain and dust..
  • 【Protect Your Exhaust Tip】: This product is installed to prevent deformation and oxidation of the exhaust pipe. Each of our stainless steel chrome muffler tip has a small drain hole at the bottom of the tip to prevent water buildup. And it is a nice sound modifier. This tip is very easy to install, built of high quality material, and looks cool with long service life..
  • 【Easy to Install】: The installation is easy for you. Using the screw connection method, loosen....
Check Stock

AUTOSAVER88 3 Inch Inlet Exhaust Tip, 3' Inlet 6' Outlet 15' Long Exhaust Tip, Silver Stainless Steel Finish Tailpipe

  • Notice: Please measure the outlet diameter of your pipe prior before purchase this exhaust tip and it should not be larger than the inlet diameter of the exhaust tip (3 inches).
  • Dimension: Standard 3″ x 6″ x 15″ inlet,outlet, and overall length respectively. Universally compatible with vehicles which have exhaust pipes with an outlet diameter of 3 inches.
  • Not Just Make it Louder: Thicker inner wall design makes your vehicle sounds rumble and crackle, enjoy the driving pleasure brought by the sounds. Also the bolt-on design make it super easy to fastens to your exhaust pipe without any hassle..
  • Stylish Look: Stainless steel material made with chrome-plated finishing provides a stylish look for your vehicle instead of the rusted old tailpipe. Effective protect your tailpipe from dust, rain and rocks, also Prevent it from deformation and damage..
  • Daily Maintenance: To make this exhaust tip has a long-life service – Please Sweep away the welding debris, cement, oil, white ash, putty, sand ash regularly to keep the surface clean. We recommend to do above action once a month (NOTE: Professional installation would be highly recommended).
Check Stock

A ABSOPRO Car Exhaust Tip Pipe 2.36" Inlet 2.72"x2.32" Outlet Heart Shaped Exhaust Tail Pipe for Pipes Diameter 1.77" to 2.2" Stainless Steel Silver Tone

  • Replacement For - The inlet size of the exhaust tip pipe is 60mm / 2.36"(D), and the outlet size of the exhaust tip pipe is Outlet Inner Size: 69x59mm / 2.72"x2.32"(L*W), fit pipes Diameter 1.77" to 2.2",but not fit for Curved type..
  • Function - Exhaust Muffler can protect your tailpipe from rain and avoid rusting and deformation, also can improve the sound of your vehicle and improve the appearance of your exhaust..
  • Material - Car Exhaust Tip is made of stainless steel and polished surface, which is anti corrosive, anti rust and anti deform..
  • Easy Installation - 1. clean the surface of the tailpipe.
  • 3. fasten the screw to fix the exhaust nozzle..
  • Purchase Note - Please make sure the the size of your tail pipes before purchasing. This product is made by hand, which will form strengthened internal solder jointse but not affect aesthetics..
Check Stock

AUTOSAVER88 2.5 Inch Inlet Exhaust Tip, 2.5' Inlet 4' Outlet 9' Overall Length Stainless Steel Tailpipe Chrome Polished Exhaust Tips

  • Notice: Please measure the outlet diameter of your pipe prior before purchase this exhaust tip and it should not be larger than the inlet diameter of the exhaust tip (2.5 inches).
  • Dimension: Standard 2.5″ x 4″ x 9″ inlet,outlet, and overall length respectively. Universally compatible with vehicles which have exhaust pipes with an outlet diameter of 2.5 inches.
  • Not Just Make it Louder: Thicker inner wall design makes your vehicle sounds rumble and crackle, enjoy the driving pleasure brought by the sounds. Also the bolt-on design make it super easy to fastens to your exhaust pipe without any hassle..
  • Stylish Look: Stainless steel material made with chrome-plated finishing provides a stylish look for your vehicle instead of the rusted old tailpipe. Effective protect your tailpipe from dust, rain and rocks, also Prevent it from deformation and damage..
  • Daily Maintenance: To make this exhaust tip has a long-life service – Please Sweep away the welding debris, cement, oil, white ash, putty, sand ash regularly to keep the surface clean. We recommend to do above action once a month (NOTE: Professional installation would be highly recommended).
Check Stock

AUTOSAVER88 3 Inch Inlet Exhaust Tip, 3' Inlet 3' Outlet 12' Overall Length Stainless Steel Turn Down Tailpipe Chrome-Plated Exhaust Tips

  • Notice: Please measure the outlet diameter of your pipe prior before purchase this exhaust tip and it should not be larger than the inlet diameter of the exhaust tip (3 inches).
  • Dimension: Standard 3" x 3" x 12" inlet,outlet, and overall length respectively. Universally compatible with vehicles which have exhaust pipes with an outlet diameter of 3 inches.
  • Not Just Make it Louder: Thicker inner wall design makes your vehicle sounds rumble and crackle, enjoy the driving pleasure brought by the sounds. Also the bolt-on design make it super easy to fastens to your exhaust pipe without any hassle..
  • Stylish Look: Stainless steel material made with chrome-plated finishing provides a stylish look for your vehicle instead of the rusted old tailpipe. Effective protect your tailpipe from dust, rain and rocks, also Prevent it from deformation and damage..
  • Daily Maintenance: To make this exhaust tip has a long-life service - Please Sweep away the welding debris, cement, oil, white ash, putty, sand ash regularly to keep the surface clean. We recommend to do above action once a month (NOTE: Professional installation would be highly recommended).
Check Stock

AUTOSAVER88 2.5 Inch Inlet Exhaust Tip, 2.5' Inlet 4' Outlet 12' Overall Length Stainless Steel Exhaust Tips Chrome-Plated Finish Tailpipe

  • Notice: Please measure the outlet diameter of your pipe prior before purchase this exhaust tip and it should not be larger than the inlet diameter of the exhaust tip (2.5 inches).
  • Dimension: Standard 2.5″ x 4″ x 12″ inlet,outlet, and overall length respectively. Universally compatible with vehicles which have exhaust pipes with an outlet diameter of 2.5 inches.
  • Not Just Make it Louder: Thicker inner wall design makes your vehicle sounds rumble and crackle, enjoy the driving pleasure brought by the sounds. Also the bolt-on design make it super easy to fastens to your exhaust pipe without any hassle..
  • Stylish Look: Stainless steel material made with chrome-plated finishing provides a stylish look for your vehicle instead of the rusted old tailpipe. Effective protect your tailpipe from dust, rain and rocks, also Prevent it from deformation and damage..
  • Daily Maintenance: To make this exhaust tip has a long-life service – Please Sweep away the welding debris, cement, oil, white ash, putty, sand ash regularly to keep the surface clean. We recommend to do above action once a month (NOTE: Professional installation would be highly recommended).
Check Stock