Top Exhaust Tips For Trucks 2

Flowmaster Super 44 Mandrel-Bent Aluminized Dual Truck Exhaust Kit w/Chrome Tips for Silverado, Sierra, F-Series & Ram

  • Performance Dual Exhaust for Ram, Ford F-Series, Silverado & Sierra trucks.
  • Single 3 inch inlet /Dual 2.5 inch outlet Flowmaster Super 44 Muffler.
  • Two 2.5 inch high-flow mandrel-bent tailpipes, cut and swedged.
  • Two 3.5 inch x18 inch WELD-ON angle-cut chrome tips.
Check Stock

AUTOSAVER88 2.5 Inch Dual Exhaust Tip, 2.5" Inlet 3" Outlet 9.5" Long Chrome Polished Stainless Steel Double Wall Exhaust Tail Tip for 2.50" Outside Diameter Tailpipe, 2 1/2 Inch Exhaust Tip, Weld On

  • universal fits 2.5" outer diameter of trucks car exhaust tailpipe (please make sure the outlet outer diameter of your vehicle tailpipe is 2.5" before purchase).
  • Anti-deformation & rustproof: Built from high-grade stainless steel, our exhaust tips effectively resist heat, rust and deformation to protect & decorate your tailpipe system well.
  • plus, a drainage hole helps drain water to prevent rust.
  • Stylish & pleasant-sounding: Sleek rolled-edge angle cut and thicker inner wall design make your car sounds rumble and crackle for a more powerful and unique sound.
  • meanwhile, polished finish offer your car with a new & sporty appeal.
  • Easy installation: weld-on design, double layer wall, slant angle cut, rolled edge.
  • Daily Maintenance: To make this exhaust tip has a long-life service - Please Sweep away the welding debris, cement, oil, white ash, putty, sand ash regularly to keep the surface clean. We recommend to do above action once a month (NOTE: Professional installation would be highly recommended).
Check Stock

Upower Universal Diesel Trucks Car Exhaust Tip 4 Inch Inlet 6" Outlet 15" Long Stainless Steel Bolt-On

  • 【Design】Bolt On - Rolled Edge - 45 Degree Single Angle Cut..
  • 【Material】High quality stainless steel mirror polished. Durable and Anti-corrosive,protect the original tips from Sun and Rain,avoid rusting and deformation..
  • 【Wide Application】Universal fits 4" Inlet diesel trucks pickup car exhaust system. Note: Please keep the Exhaust tip away from salt,snow solvents and avoid using highly acid chemical cleaners.
  • 【Easy Installation】No weld and drill needed. Just fix the screw to the appropriate location of tailpipe by Wrench..
Check Stock

4Pcs Black Exhaust Tips Muffler Tips Compatible With BMW F87 M2 F80 M3 F82 F83 M4 F10 M5 F12 F13 M6 Stainless Steel Muffler Tip-2.75in Inlet

  • 【Universal Fitment】- The 4pcs 2.75 inlet exhaust tips fit for BMW F87 M2 F80 M3 F82 F83 M4 F10 M5 F12 F13 M6..
  • 【High quality steel】- The f87 m2 exhaust tips for BMW are designed with durable SUS304 stainless steel . Protect your original pipe from sun and....
  • 【Effect】- The f80 m3 exhaust tips for BMW can protect the exhaust pipe from sun/rain and avoiding rusting and deformation, giving you car a better....
  • 【Easy installation】- No welding,no drilling and no bolting on. The f82 m4 exhaust tips for BMW can be easily installed on. Remove the original....
  • 【Warranty】- Tempsnow provide 30-Days warranty. If you have any problems with it or questions, please contact us and we will respond in time. We're....
Check Stock

Upower 2 inch Inlet Exhaust Tip Burnt Muffler 3 inch Outlet, 2' to 3' 14.6' Length Exhaust Tip Universal For Car Truck

  • Dimension: 2 inch inlet, 3 inch outlet, Overall Length: 14.6 inch, Exhaust Muffler body width 4 inch.
  • 2 in 1 Design: This is a 2 inch muffler resonator with blue burnt exhaust tip, design with thick wall straight cut and can be easily weld on the exhaust tip pipe..
  • High Quality Material: Upower exhaust tip built with mirror polished stainless steel & blue plating. Muffler is made by premium cotton helps absorbing sound and producing a low, deep tone, durable and Anti-corrosive, never Rusty.
  • Wide Application: Universal fits any 2.0" Outlet or 2.1" Inlet trucks car exhaust tail pipe..
  • Note: 1 Year Warranty, No instruction is included. Professional installation is highly recommended..
Check Stock

AUTOSAVER88 1.75-2.25 Inch Adjustable Dual Exhaust Tip, 1.75'-2.25' Inlet 3' Outlet 8.66' Long Stainless Steel Double Layer Exhaust Tail Tip for 1.75'/2.0'/2.25' O.D. Tailpipe, Bolt On, Black Plating

  • Dimension: 1.75-2.25 inch adjustable inlet diameter.
  • universal fits 1.75″/2.0″/2.25″ outside diameter exhaust pipes whatever its Year/Make/Model is (Note: please measure dimension to make sure the outside diameter of your tailpipe is between 1.75-inch and 2.25-inch before purchasing).
  • Anti-deformation & rustproof: built from high-strength stainless steel, our exhaust tips perfectly decorate your tailpipe system with polish stainless surface.
  • effectively anti-corrosive, avoid rust and deformation for enhanced durability.
  • Stylish & pleasant-sounding: the thicker inner wall design make your car sounds rumble and crackle for a more powerful and unique sound, meanwhile, the light black plating finish gives your car a new & sporty appeal.
  • Easy installation: Bolt-on design, double layer wall, slant angle cut, rolled edge.
  • Maintenance tips: please routinely clean off the debris, cement, oil, dust and dirt on the surface or the interior of the exhaust tips since good maintenance ensures a longer service life of exhaust tips (NOTE: Professional installation would be highly recommended).
Check Stock

2PCS Car Exhaust Rubber Hanger, 2 Holes 11mm (0.43inch), Universal Exhaust Insulator Muffler Hanger, Muffler Bracket Bushing Mount(Black)

  • Universal Accessories: This rubber exhaust hanger fits most cars that use an easy-to-replace hanger system, consisting of two holes and a rubber-lined insulator bracket. Be sure to check the size and distance between the hooks before use to ensure the product is suitable for use..
  • Function: The high-density rubber muffler hanger effectively reduces the sound produced by the shaking and collision of the exhaust pipe. Reduce the height and contact surface between the exhaust pipe and the body to prevent the exhaust pipe from scratching along the ground..
  • Depth: 20mm (0.8") Bore: 11mm (0.43"). It is a universal vehicle tool for exhaust systems of cars, trucks, jeeps and SUVs. Be sure to measure the size before purchasing, so as not to be inappropriate for use..
  • Installation: First remove the muffler hanger from the exhaust system using the exhaust hanger removal tool. Then hang the new exhaust hanger on the mounting pegs attached to the chassis. Finally, hang the other end of the exhaust hanger on the mounting nail on the exhaust pipe..
  • What You Will Get: 2× rubber exhaust hanger, this rubber exhaust hanger is essential, and it can effectively reduce the sound produced by shaking and hitting the car....
Check Stock

idain 2.5 inch Inlet Dual Exhaust Tip Stainless Steel Polished Muffler Tail Universal Bolt-On Double Outlet Tail Pipe (Black,Curved)

  • Durable Material:Design with durable stainless steel,strong corrosion resistance,high temperature resistance,during and waterproof.
  • Dual Exhaust Tip:With dual exhaust tip, it can increase exhaust pressure and reduce exhaust noise effectively.
  • Excellent Appearance:Exquisite tail throat with stylish design and bright color, replace the traditional exhaust tip to make your car shiny and cool.
  • Universal Fit:Wipe application for 63mm/2.5 inch Inlet trucks pickup car exhaust system.
  • Easy Installation:No weld and drill needed. Just fix the screw to the appropriate location of tailpipe by Wrench.
Check Stock

Pack of 2 Upower Dual Exhaust Tip Tailpipe 2.5 Inch Inlet 3.5" outlet 9.5" Length Polished Stainless 1.2mm Thickness (Double Wall Slant Edge)

  • Overall Length:9.5 inch. Please check all the dimensions before purchasing in case of installation interference..
  • 【Design】Weld On - Double Wall Slant Angle Cut.
  • 【Material】High Quality Mirror Polished T304 Stainless steel. Durable and Anti-corrosive,never Rusty..
  • 【Wide Application】Universal fits 2.5" INLET trucks car exhaust tail pipe muffler tips..
  • 【1 Year Warranty】No instruction is included. Professional installation is highly recommended..
Check Stock

Upower 2.5 inch Inlet 4 inch Outlet Exhaust Tip 2.5' to 4' Exhaust Tailpipe Tips 9' Long Black Weld On 1.2mm Thick Stainless Steel 2 1/2 Inlet Rolled End (Pack of 2)

  • 【Upower Exhaust Tip Dimension】2.5 inch inlet diameter.
  • Overall Length:9 inch(2pcs Exhaust Tip are same).
  • 【Design】Weld On - Exhaust Tip Straight Cut- Rolled End.
  • 【Material】High Quality Exhaust Tip Tailpipe built with Stainless steel with black coating. Durable and Anti-corrosive,never Rusty..
  • 【Wide Application】Universal fits any 2 1/2" Outlet or 2.6" Inlet trucks car exhaust tail pipe..
  • 【1 Year Warranty】No instruction is included. Professional installation is highly recommended..
Check Stock

2PCS Car Exhaust Rubber Muffler Hanger, 2 Holes 11mm (0.43inch), Universal Muffler Bracket Mount, Exhaust High Density Rubber Insulator Muffler Hanger (Black)

  • Universal Accessory: This rubber exhaust hanger fits most cars that use an easily replaceable hanger system and consists of two holes and a rubber lined insulator bracket. Please be sure to check the size and distance of the hooks before use to ensure the product is suitable for use..
  • High quality rubber: The exhaust pipe insulator hanger is made of high quality, high density rubber. It is heat resistant and durable for long term use. This is a standard automotive part used to replace exhaust systems..
  • Depth: 20mm (0.8") Hole diameter. 11mm (0.43"). It is a universal vehicle tool for exhaust systems of cars, trucks, Jeeps and SUVs. Please make sure to measure the size before purchase to avoid improper use..
  • Installation: First use the exhaust hanger removal tool to remove the muffler hanger from the exhaust system. Then hang the new exhaust hanger on the mounting pegs attached to the chassis. Finally, hang the other end of the exhaust hanger on the exhaust pipe mounting pegs..
  • What you will get: 2 x rubber exhaust hanger, this rubber exhaust hanger is essential to effectively reduce the sound generated by rocking and hitting the car body, reduce the height and contact surface of the exhaust pipe with th....
Check Stock

Exhaust Manifold Bolt Repair Kit Compatible with 1999 & Newer GM Trucks and SUV's With a 4.8L, 5.3L, 6.0L & 6.2L LS Engines (Driver Front/Passenger Side-Rear)

  • ...de of your vehicle. If you have a 6.0L engine in your vehicle it will fit 100% (1999 and newer) as there is only one manifold style for the 6.0L engine..
  • 【Function and Role 】Install this part is to repair the driver's side front or the passenger side rear corner broken exhaust manifold bolts. Stops exhaust leaks that occur between the exhaust manifold and the cylinder head. Make your driving quieter..
  • 【High-Quality Materials】 Exhaust manifold repair brackets made of High quality carbon steel, up to OEM standard.TIG welding for durablity and long service time.exhaust manifold bolt repair brackets will not fail like the bolts do from heat and expansion of the manifold.
  • 【After-sales service】Confidence originates from quality! We promise to provide one free return/exchange within 30 days. Provide customers with a truly risk-free shopping experience. If you have any problem, feel free to contact us..
Check Stock