Top Expanding Drum Brake

Detroit Axle - All (4) Front Disc Rotors and Rear Drum Brake Kit s w/Ceramic Pads & Brake Kit Cleaner & Fluid for 2009 2010 2011 2012 2013 Chevy Silverado 1500 / GMC Sierra 1500

  • For - 2009-2013 Chevrolet Silverado 1500 (Rear Drum Brake Models) - [2009-2013 GMC Sierra 1500 (Rear Drum Brake Models)].
  • Kit Includes: 2x Front Disc Brake Rotors + 2x Rear Brake Drums + 2x Front Brake Pads + 2x Rear Brake Shoes + 2x Brake Cleaner & Fluid.
  • Brake Drums and rotors are built to exceed OEM Specification and have the proper fit and finish required for superior stopping power..
  • Undergo impact, wear, and fatigue testing to help ensure quality and durability.
Check Stock

307 Pieces Drum Sander Set GOCHANGE Sanding Drum Kit - 300 Pieces Sanding Band Sleeves (80#/120#/240#) + 6 Pieces Drum Mandrels for Dremel Rotary Tool (2.35mm/3.17mm)+ 1 Combination Wrench

  • ...: 300 Grit Commonest And Standard Size Sanding Bands Use For Smoothing Surface And Curved Edges. Widely Used On Smooth Surfaces And Curved Edges, Polished Soft And Hard Materials Such As Home Improvement, Engraving, Metal, Carpentry, Jade, Art And Other Diy Activities..
  • ✔EASY INSTALLATION: Drum Mandrels With Self-Expanding Rubber Cushion, Making The Sanding Bands Close To The Manderl Firmly And Acheiving Better Finishing.
  • In Case The Sanding Band Fall Apart From The Mandrel While Using, Please Make Sure The Drum Have Been Screwed Tightly And Wear Closely To The Sleeve.
  • ✔PRECISION TIGHT, NON-SLIP FIT: Our self-expanding rubber cushioned drum mandrels were especially designed to embrace the sanding bands with a snug fit, keeping the sandpaper sleeves in place, for extra fine artwork. Designed to expand once the nut on the top of the drum is tightened. Easily slide bands over drum & tighten screw for non-slip fit. Our drums should fits most other sanding bands if the sizes are compatible..
  • ✔REUSABLE: Our Drum Mandrels Were Produced With Heavy Duty Rubber For a Long Lasting Endurance. The Shanks Was Ideally Constructed With a Solid High Quality Metal That Will Easily Chuck Into Any Drill Bit And Stay Put. May Always Reuse According To The Artw....
Check Stock

LEAPGOMAX Club Car Golf Cart Brake Drums/Hub&Brake Shoes Spring Kit Fit Club Car DS 1995-Up&Precedent 2004-Up, Golf Cart Brake Maintenance Kit OEM#101791101 1018232-01 101816301

  • ⛳【UNIVERSAL FIT】The golf cart brake drums and brake shoes kit fit for Club Car Precedent gas & electric (2004-up) golf carts and DS (1995-up) gas & electric models..
  • ⛳【Club Car Brake Drum/Hub】2 PCS Club Car replacing brake drum/hub will allow your golf cart to perform as intended. Replaces OEM Number(s): 1017911-01,10603..
  • ⛳【Club Car Brake Shoes】4 PCS self-adjusting (2 long and 2 short) golf cart brake shoes set for one Club Car DS or Precedent golf cart. Replaces OEM#1018232-01..
  • ⛳【Club Car Brake Shoes Spring Kit】12 PCS Club Car brake shoes spring Kit Included. Replaces OEM#101816301..
  • ⛳【Keep Safe】This golf cart brake shoes spring kit & brake drums maintenance kit good for improving your cart brake's performance. Replace worn or damaged parts to keeps your cart safe..
Check Stock

XUANYUDG0769 Golf Cart Brake Drum Hub Assembly for EZGO TXT PDS 1982-up Electric Cart (Not Fit Gas Models), Replace OEM# 19186G1P, Include Nut and Flat Washer, 2 Pack

  • 【Applicable Models】Golf cart brake drum hub assembly fits perfectly 1982-up EZGO Electric Vehicles, not suitable for gas models. This brake drum/hub assembly replaces Part# 19186G1P.
  • 【Durable Quality】It has a 3/4-Inch center hole with a 24-tooth star spline instead of the straight key. When replacing this brake drum, check the Hub assembly as well..
  • 【Warm Tips】Hub spline and Rear Axle Shaft Spline should be matched tightly. If one of them is wear out, both of them should be replaced at the same time, otherwise the hub spline will strip soon..
  • 【Package Included】2X EZGO TXT drum brake, 8X chrome lug nuts, 4X flat washer and 2X bolt pin, 1X instruction.
  • 【Customer Service】 XUANYUDG0769 is a professional manufacturer for golf cart accessories. We’re committed to providing excellent quality products for global customers. If you have any question about installation or any other questions, please contact us via amazon. We will provide 24-hours online service..
Check Stock

ACDelco Gold 17800B Bonded Rear Drum Brake Shoe Set

  • Quality validated for proper metallurgy and correct brake plate thickness.
  • Non-directional brake surface finish for consistent braking.
  • All shoes are machined for correct shoe-to-drum contact.
  • Highest shear strength for the best bond integrity.
  • Contour or cam ground to eliminate chatter and rear wheel lockup.
  • Rust-preventative coating provides corrosion protection for superior durability.
Check Stock

OCPTY Trailer Hub Brake Drum 10 x 2-1/4 Wheel Bearing Kits For 1-1/16 Outer 1-3/8 Inner 5 Bolt Lug For 3,500 lb. Axles Tapered Spindle Grease Seal

  • This hub bearing is meticulously manufactured and easy-installation designed, which can bring you a convenient and fantastic using experience.
  • Black 10 x 2-1/4 trailer brake drum kit. Bolt pattern is 5 on 4.5.
  • 1 pack Trailer Brake Drum Hub kit For 1 year after-sale warranty.
  • Complete assembly with hub, bearings, seal, cap, Lug Nuts and cotter pin.
Check Stock

Eastwood CONTOUR SCT Expanding Drum 3.5 in Diameter for Trizact Sanding Bands

  • Expanding Drum Is For Use With The Contour SCT Only.
  • Drum Dimensions Are 4 Inches Wide By 3.5 Inches Diameter.
  • For Use With Eastwood Contour 21152 21155, 21156 Sanding Bands And 21178, 21179 Trizact Sanding Bands.
Check Stock

Big Horn 19521 Rubber Sanding Drum Set, 20 Piece

  • A selection of most widely used sizes of rubber-cushioned, self-expanding sanding drums.
  • Kit includes cloth backed all-resin-bond abrasive bands for each sized drum.
  • Drum can be used with the portable electric drills, flexible shafts and drill presses.
  • Drums use friction fit design - no adhesive needed.
Check Stock

QuickCar Racing Products 61-103 Mini Brake Bias Gauge Panel

  • Disc and drum brakes - useable with both disc and drum style brake pads on any type of vehicle from passenger cars and trucks to heavy duty transportation.
  • Color-coded - color powder-coated blades help to quickly determine the brake pad status when examining brake lining.
  • Durable steel - the durable 20-gauge steel blades won't easily bend or break like plastic.
  • Stamped callouts - each blade has both metric and SAE measurements stamped into the metal.
  • Blade sizes - yellow blade tip measures 4/32 (0.1250)-inch (3.18mm) and the red blade tip measures 2/32 (0.06259)-inch (1.59mm).
Check Stock

Dodge Dakota Jeep Wrangler Cherokee Drum Brake Hold Down Spring

  • Dodge Dakota Jeep Wrangler Cherokee Drum Brake Hold Down Spring - Part#4313062.
Check Stock

345pcs Sanding Drums for Drum Sander Kit with 330pcs Sanding Band Sleeves 12pcs Drum Mandrels 2pcs Self-Tightening Drill Chuck 1 pcs Combination Wrenc for Dremel Rotary Tool

  • 150pcs Sanding Drums: The package contains 150 sand drums. The sand band is a universal 120 grit, with 1/2”, 3/8” and 1/4” sizes in diameter. The right size can meet a variety of uses.
  • 12pcs Drum Mandrels: You will also get 12 drum mandrels that match the size of the sand drum. Their diameters are 1/2”, 3/8” and 1/4”.
  • Easy to Install: The drum mandrel is equipped with a self-expanding rubber pad, so that the sand belt is close to the core shaft and can be reused..
  • Good Compatibility: The drum sleeve matches the most common and standard size drum sanders.
  • Wide Application: The sanding drum kit for drum sander is widely suitable for DIY finishing and processing such as home improvement, handicrafts, woodworking, nut carving, metal, plastic, jade, circuit boards, etc..
Check Stock

VEVOR Brake Line Flaring Tool, 37 & 45 Degree Single, Double, and Bubble Flares for 3/16', 1/4', 5/16' and 3/8' Tube Size, Suitable for Soft Metal of Copper Lines

  • Four Tube Expanding Size: This brake line flaring tool includes 4 dies in the following sizes: 3/16 inch (4.75mm), 1/4 inch (6.35mm), 5/16 inch (8 mm), 3/8 inch (9.5 mm). It creates 37° and 45° single, double, and bubble brake flares in seconds. Reduce the friction on flares to ensure your vehicle operates at optimal performance..
  • Applicable Materials: This double flare brake tool is suitable for expanding copper and aluminum piping. It is an excellent tool for repairs on vehicles or taking lines off of a vehicle. Whether you're working on brake lines, transmission cooler lines, or fuel lines, our flaring tool will help you create the flares you need quickly and easily..
  • Leakproof Connection: With the turret-style design, the professional brake line flaring tool keeps all your dies ready. They are available and within immediate reach with the convenient turret carrier, greatly saving you the hassle of fumbling for small parts or losing them..
  • Vise-Mounted: The brake line flare tool is compatible with a bench-mounted vise in your workshop or on a hitch-mounted vise in the field (not intended for use under a car). The 6.3-inch (16 cm) T-handle screw clamp can hold the die and tube in place firmly without vibration. After repairing, your vehicle will be ....
Check Stock