Top Expansion Anchor Nuts - BuyWiseBest.com

Anrik 1\\/4 inch x 2-1\\/4 inch - 20 Pieces Wedge Anchor Zinc Plated Heavy Duty Fastener for Concrete

Wedge anchor diameter: 1/4" | Length: 2-1/4" | Qty: 20 pieces. Our wedge anchor is made from high quality carbon steel, and is zinc plated to prevent rust.
Drill bit diameter/Hole diameter is the same as anchor diameter. Use a 1/4" drill bit to drill a hole in the base material (Concrete only).
The wedge anchor is a torque-controlled, wedge expansion anchor. The required installation torque of the anchor is 4 ft/lbs..
The concrete anchor is for heavy duty fastening applications where high pull out values in concrete are needed. It is for concrete only, not for block or brick base material.
The wedge anchor is used in fastening sheet metal, steel and aluminum angles, or wood to concrete. The wedge anchor is ideal for structural anchorage, storage racking anchorage, machinery and hand rails installation.

Safety Material: 304 stainless steel assembly that offers excellent resistance to corrosion in typical exterior environments, high strength, good flexibility, light weight, rust resistance and corrosion protection..
Sturdy Anchor: The bolt hanger is rated at 25kN, which offers a safe connection point for you. The embedded end of the expansion screw is designed with an expansion sheet, which expands internally when stressed, which is safe and reliable..
Anti-rotation System: Textured back keeps the hanger from turning when the anchor is being installed or when it is heavily laterally loaded during use..
Easy clipping: The wide, ergonomic connection hole facilitates fast clipping - the width of the hole allows installation of two at the same time..
Prevents wear of connectors: The AOKWIT thickness of the hanger and the rounded edges of the connection hole limit wear of connectors..

★ Product features: The plastic anchor is made of durable material, which is not easy to break, rust, corrosion, anti-aging, good toughness, and easy to remove. Ribbed nylon expansion pipes need to be drilled with 8-10mm, the thickness of the plate is about 10-15mm, and the heavy load is 50Lbs. Screws fixed to the wall.
when tightening the screws, the plastic anchor will expand, increasing the fixing force, and will not follow the screws when the drill is rotating, which is better stability..
★ Application: It is widely used in the installation and fixing of light-weight hollow bricks, gypsum boards, curtains, lamps, cross-stitches, photo frames, TV stands, decorations, artworks, etc. It can be used for curtain installation, fixture installation, object fixing, artwork and other functions, and plays a good role in fixing..
★ Product size: The length of the expansion tube is 50mm, the outer diameter is 8mm, and the inner diameter is 3.8mm. The recommended opening size is 10mm..

Expansion shield anchor provides a secure hold in most materials including solid masonry and uncracked concrete, even in applications where the anchor will be exposed to side pressure or vibration.
Anchor is made of rust-resistant zamac alloy and consists of cone on each side that expands the surrounding sleeve when a threaded machine bolt is inserted, gripping the mounting material and holding the anchor in place.
Meets Fed. Spec. GSA FFS-325 Group II Type 2 Class 2 Style 2 specifications.
Ultimate tensile strength is 1,190 lb. in 2,000-psi concrete.
Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations).

M10 x 80mm Expansion Bolts, Thread Diameter: 10mm/ 0.4'', Expansion Tube Diameter: 12mm/ 0.47'', Total Length: 80mm/ 3.14''..
Made of 304 stainless steel, durable and rust resistant..
Concrete and masonry anchors, easy to install..
Used for heavy duty fixing of concrete masonry and solid masonry, ceiling and expansion sleeve anchor bolts..
Package Included: 4Pcs M10 x 80 expansion bolts..

Standard size M8 expansion bolt, 70mm total length, with flat washer and hex nut..
High quality 304 stainless steel. Sturdy and firm, resistant to rust and corrosion. Concrete anchor and masonry anchor , easy to be mounted..
Widely used in fence,burglarproof doors and window,canopy,air conditioning rach fixation,home decoration,engineering,etc..
If the wall is built by relatively soft brick , it may need to make the hole which is 1mm smaller than the suggested..
Air brick, foam concrete block,are not suitable for these expansion bolts..

...ging, good toughness, easy to remove. The unique appearance and use design make it more convenient and durable..
★ Application: Widely used in the installation and fixation of lightweight hollow bricks, gypsum board, curtains, lamps, cross-stitch, photo frames, TV cabinets, decorations, artworks, etc. Ribbed nylon expansion pipe needs to drill 8-10mm, the thickness of the plate is about 10-15mm. The screw is fixed on the wall.
when tightening the screw, the plastic anchor will expand, increasing the fixing force, and will not follow the screw when the drill bit rotates, thus having better stability..
★Product size: The length of the expansion tube is 30mm, the outer diameter is 8mm, and the inner diameter is 3.8mm. The screw size is M3.5 * 53mm, and the recommended opening size is 10mm, which is suitable for 8-15mm thick plates..
★ Product material: Quality plastic+metal.
★ Packing: 50pcs Aircraft type expansion plug+50pcs Screw.

Made of 304 Stainless Steel, durable and sturdy, anti-corrosion, long service life.
Ideal concrete and masonry sleeve anchor , strong and heavy duty. Standard size M6 hex expansion bolt, easy to install.
Weatherproof , suitable for indoor or outdoor environment.
Package includes: 5 x Hex Expansion Bolt.

...r installation onto drywall or gypsum wallboard and won't damage your walls either..
✔️ Weight Holding Capacity: Our plastic anchors for drywall support 75 pounds of mirrors and painting, more securely than other ordinary anchors. With their appropriate elasticity and tensile strength, resistance and significant expansion force, these sheetrock anchors enhance installation quality and productivity..