Top Extended Length End Mill

AUTOTOOLHOME 1/4 inch HSS 4 Flutes End Mills Milling Cutter End Drill Bit Straight Shank Pack of 2

  • HIGH PROCESSING EFFICIENCY: the edge of end mill bits is HARD and SHARP with TIAIN coating, process the heat treatment materials under 32°with high speed, reduce changing times and improve the production efficiency..
  • APPLICATION: end mill bits are suitable for side milling, end milling, finish machining, etc. Apply to carbon steel, alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc..
  • CUTTING EDGE DESIGN: the bottom of end mill bits is u-shaped groove design, large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency..
  • STRONG and DURABLE:The end mill bits are made from Ultra-fine tungsten steel bar, with high bending resistance and abrasion resistance, exclusive to HIGH HARDNESS, HIGH SPEED CUTTING applications..
Check Stock

End Mill Bits 5Pcs 6mm Shank Single Flute End Mills Drill Bit Tool Tungsten Carbide CNC Router Milling Bits for Wood Aluminum Steel PCB PVC Circuit Boards Acrylic Carbon Fiber

  • [Specification]: Shank diameter 6mm/0.23".
  • [Single Flute End Mills]: 5 Pcs end mill bits.
  • [ Cutting Edges]: The milling cutter has edges, it can milling holes, s and edges on plates smoothly.
  • [Premium Material]: These drill bits are made of premium tungsten carbide for good milling.
  • [Widely Application]: This carbide end mill is widely used for engraving such as PCB PVC MDF, circuit boards, Acrylic, carbon fiber and other soft materials.
Check Stock

End Mill Bits 10 Pcs 1/8” Shank Single Flute End Mills Drill Bit Tool Tungsten Carbide CNC Router Milling Bits for Wood Aluminum Steel PCB PVC Circuit Boards Acrylic Carbon Fiber

  • [Specification]: Shank diameter 3.175mm 1/8”.
  • [Single Flute End Mills]: 10 Pcs end mill bits.
  • [ Cutting Edges]: The milling cutter has edges, it can milling holes, s and edges on plates smoothly.
  • Offer a smooth cutting surface and chip clearing.
  • [Premium Material]: These drill bits are made of premium tungsten carbide for good milling.
  • [Widely Application]: This carbide end mill is widely used for engraving such as PCB PVC MDF, circuit boards, Acrylic, carbon fiber and other soft materials.
Check Stock

SpeTool CNC Router Bits Carving Set for Wood Profile V Groove Engraving Solid Carbide 1/4 Inch Shank

  • The Carving router bit sets of Tapered Ball Nose, Spiral, Cone End Mill Cutter.
  • For CNC,Engraving machine woodworking, Carving soft and hard wood, plywood, MDF, stainless steel, titanium alloy etc.
  • Long service life, Decreasing the times of changing cutters,Saving production time.
  • Include 2*carbide end mills ( 1 pc v-groove end mill, 1pcs tapered end mill ), 2*Spiral router bit (1 pc up cut, 1 pc down cut).
  • The Carbide End Mill Suit for CNC Router, xcarve and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
Check Stock

findmall 5-Piece R8 End Mill Holder Set 1/4 3/8 1/2 5/8 3/4 Adapter for Bridgeport Type Milling Machines

  • Diameters - Contains 1 each R8 holders: 1/4, 3/8, 1/2, 5/8, & 3/4..
  • Well-made Processing - The surface of the face mill cutter arbor is quite smooth, which offers a comfortable feeling and nice appearance..
  • Premium Quality Material - This end mill holder is made of alloy forged tool steel, rugged and durable, which is enough to ensure a long time use..
  • Easy to Use - This end mill holder set is suitable for both double ended and single ended, which is more convenient..
  • Application - This end mill holder is suitable for milling machines with R8 spindles.The set includes 5 sizes of end mill holder to meet your various needs..
Check Stock

5PCS R0.5-3mm Ball Nose Carbide End Mill Set CNC Cutter Router Bits 2 Flute Spiral Milling Tool End Mill Set Includes 5 Radius Sizes Of 0.5mm 1mm 1.5mm 2mm 3mm

  • Applicable Materials: ball mill bit usually used for steel（Carbon steel/Alloy steel/Hardened steel/Cast lron, etc.）.
  • Ball End Mill Specification -- Cutting Diameter: 1 - 6MM（1mm 2mm 3mm 4mm 6mm），Shank Diameter:4 - 6MM（4mm 4mm 4mm 4mm 6mm），Cutting Length:2 - 12MM（2mm 4mm 6mm 8mm 12mm），Overall Length:50MM.
  • Wide Compatibility: ball nose end mill set are compatible with most desktop CNC machines, as well as other industrial CNC machines. Just make sure you select the correct-sized collet for your device..
  • High Quality:made from solid tungsten carbide (TC)，have a Titanium Nitride (TiN) surface to improve heat resistance and reduce wear..
  • Used it strictly for steel, it worked great for that, eats metal fast ，beautiful surface finish!Watch your stick out and travel speeds..
Check Stock

OSCARBIDE 1/8\Shank Ball Nose Carbide End Mills CNC Spiral Router Bits 2 Flutes Milling Cutter for Engraving Milling 3D sculpturing Roughing Acrylic Wood PVC Aluminum 10pcs

  • Ball Noze type,1/8" Shank X 1/8"Cutting Dia, 17mm Flute Length with 2 Spiral Flutes, Total length 38 mm.
  • Carbide Ball End mill Router bits are widely used For CNC Engraving, Milling, Roughing, Hollowing, 3D sculpturing purposes.
  • Due to the Great hardness of solid Tungsten carbide Material, it can easily remove materials like Wood, acrylic, PVC, cooper, aluminum, and steel, MDF, Resin, PCB.
  • Double Flute Spiral Design Improved the chip removal efficiency, surface mirror finish prevent chips from sticking to bits, which makes cutting more smooth.
Check Stock

Yakamoz 10-Pack 1/8" Shank Upcut Spiral Router Bits 3-Flute 7/8" Cutting Length CNC Router Flat End Mill Bits for MDF Acrylic Wood PVC 7/8" Cutting Length

  • Type: Spiral (Upcut), Cutting Type: 3 Flutes with Flat End, Shank: 1/8" (3.175mm), Cutting Diameter: 1/8" (3.175mm), Cutting Length: 7/8" (22mm), Overall Length: 1-33/64" (38.5mm).
  • Spiral bits used for side milling, end milling, finish machining, etc. End Mill Bits can smoothly upcut groove and slots, mortises, cycles and dados with clean edge and bottom, better than straight bits..
  • The unique flute design makes cutting process easier and faster, smooth cutting without 2nd polishing process..
  • Great for carving, cutting, engraving, milling in materials like density board, plastic, PCB, PVC, PP, MDF, nylon, resin, plywood, hardwood etc..
  • Built with tungsten steel, the CNC router mill has the superiority of high hardness, high-temperature resistance, and wear resistance..
Check Stock

EANOSIC Spiral Router Bits Up Down Compression Bit 1/2 inch Cutting Diameter with Nano Blue Coated 1/2 inch Shank Solid Carbide CNC End Mill for Wood Carving Engraver Milling Cutters Extra Long 4”

  • UP & DOWN cut spiral router bit with 1/2 inch shank and 1/2 inch cutting diameter, 1-1/2 inch cutting length, 4 inch for total length.
  • SOLID CARBIDE AND NANO BLUE COATED: The up and down cut spiral router bit is made of solid carbide. And Nano Blue Coating with high hardness and heat....
  • Spiral bits used for side milling, end milling, finish machining, etc. End Mill Bits can smoothly upcut and downcut groove and slots, mortises, cycles....
  • The CNC End Mill Router Bits apply to various wood: such as Plywood, OAK, MDF, and any hardwood working and Long service life for sharp. And also for....
  • The compression router bit suit for CNC router and any plunge routers with 1/2" collet..
Check Stock

4Pcs Tapered Ball Nose End Mill 0.25MM-1MM with 0.5MM Tip Diameter CNC Router Bits Set 2D 3D Woodworking Tool 2 Flute CNC Router Bits

  • 【High Quality】The end mills are made of ultra-fine tungsten carbide steel alloy, its nano black coating/titanium coating with high hardness and heat resistance..
  • 【End Mill Bits Set】4Pc【End Mill Set】4Pcs ball nose bit 2-flute, Nano black coat and titanium coat CNC router bits, will satisfying your different needs.s ball nose bit 2-flute, Nano black coat and titanium coat CNC router bits, will satisfying your different needs..
  • 【Parameter】Ball raidus 0.25mm, 0.5mm, 0.75mm, 0.1mm, flute length:15MM, overall length 1.5 inch, single side angle 5.12°..
  • 【Wide Compatibility】Widely used in various materials including plastics, aluminum, circuit board, wood, as well as other precision parts processing,they are compatible with most desktop CNC machines..
  • 【Wide Application】PCB, SMT, CNC, Mold, plastic fiber, carbon fiber, hard wood, printed circuit board, aluminum and other precision parts processing..
Check Stock

YOYO TOOLS, Carbide Square Nose End Mill Set- Metric Carbide End Mill CNC Milling Cutter Tungsten 4 Fultes by YOYOTOOLS (D8+D10 End Mill)

  • 8mm and 10mm End Mill Set, Material : Tungsten Carbide.
  • End Mill Cutting Diameter : 8mm , 10mm, HRC55 degrees.
  • Suit for: with high bending resistance and abrasion resistance, exclusive to HIGH HARDNESS, HIGH SPEED CUTTING applications..
  • End mill bits are suitable for side milling, end milling, finish machining, etc. Apply to carbon steel, soft alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc..
  • The bottom of end mill bits is u-shaped groove design, large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency..
Check Stock

EANOSIC Upcut Spiral Router Bit 3-Flute with 1/2” Shank, Extra Long (4 inch), 1/2” Cutting Diameter, 2” Cutting Length, Carbide CNC Router Bits End Mill for Wood Mortises Carving Engraving

  • Up cut spiral router bit with 1/2 inch shank and 1/2 inch cutting diameter, 2 inch cutting length, 4 inch for total length.
  • PREMIUM QUALITY: The spiral upcut router bits Made of solid carbide (Tungsten steel), it is high-wearable and has a long life. You can decrease the times of changing cutters, save production time..
  • The CNC End Mill Router Bits apply to various wood: such as Plywood, OAK, MDF, and any hardwood working and Long service life for sharp. And also for carbon steel, soft alloy steel, tool steel, cast iron, aluminum alloy..
  • Spiral bits used for side milling, end milling, finish machining, etc. End Mill Bits can smoothly upcut groove and slots, Mortises, Cycles and dados with clean edge and bottom, better than straight bits..
  • The router bit suit for CNC router and any plunge routers with 1/2" collet..
Check Stock