Top Extension Chuck

Fulton 10 inch Long Forstner Bit Extension for Adding Over 8\ of Drilling Depth to Your Forstner Bit Ideal for Wood Turners Furniture Carpentry and Construction (3/8 inch Collet)

  • Drilling with forstner bits to achieve a flat bottom hole or to start a deep hole turning project like on a larger vase or vessel is essentially impossible with a standard length forstner bit. To remedy this issue we have developed an extra long, heavy duty steel extension that allows you to secure a 3/8 inch shank forstner bit into the end collet..
  • The forstner bit extension gives you additional 8-1/2 inches of reach to bore deeper into your projects. This will help you create larger diameter starter holes or help when you need to drill in just a little further than the standard bit length will allow. The extension can be used with forstner bits on drill presses, lathes with a drill chuck installed (drill chuck not included) or with a power drill..
  • One of the most common uses for the forstner bit extension is for woodturners who need to bore out starter holes on larger vessels. However, the extension works exceptionally well for projects like salt shakers, pepper mills or even wood turned beverage mugs. Contractors use the extension when they need to bore deep holes for running cables or wires and they also use it for joining larger timbers..
  • The forstner bit extender is made from solid, heavy duty machined steel. It is designed to be used with forstne....
Check Stock

Milton S-516 Analog Tire Inflator with Pressure Gauge, 15\ Hose Straight Foot Lock-in Thread Chuck, Made In USA 10-160 PSI

  • ACCURATE: Performance-tested and calibrated. Measures in pounds per square inch (PSI, 10-160, 2-lb. increments). Kilopascal readings also available per special order (kPa, 80-840, increments of 20).
  • DUAL HEAD CHUCK: Makes tire valves more accessible with the two heads for easier access.
  • LOCK-ON THREADS: One of the heads is parallel to the extension. Both heads have the feature to lock onto the threads, enabling the user to not have to hold the chuck while inflating. Easy one-hand inflation.
  • INFLATOR: Heavy-duty construction. Magnifying window lens. Full-swivel chuck. 15-inch hose.
  • REPLACEABLE PARTS: Gauge and valve cartridges can both be replaced.
Check Stock

CZC AUTO Heavy Duty Inflatable Air Chuck Straight on Foot Dual Head Truck Tire Chuck 1/4 FNPT Extension Stem Compatible with Inflator Air Pump Compressor Accessories for Truck Bus Car Motorcycle

  • DUAL HEAD: Equiped with two zinc alloy head push-pull chucks, straight head is specially designed for inner/single wheels or hard-to-touch valves, and....
  • LEAK FREE: This dual head wheel air chuck is closed flow tire chuck, designed for slowly inflating, with shut-off valve inside. The air only passed....
  • INFLATABLE TIRE CHUCK: CZC AUTO inflatable air chuck uses 1/4" female NPT 5/8" hex connector, compatible with most inflator, air pump and compressor....
  • EXTENSION STEM: 6-3/8" long chrome-plated iron stem, which is rust free and alow you to reach the inner wheels without dirty your hands. Suit for....
  • CLIENT SUPPORT: 30-day money-back guarantee for any reason, 12-month warranty for quality-related issues. Please feel free to contact us at first if....
Check Stock

WEN Bench Mortiser, 5-Amp Cast Iron with Chisel Bit Set (43013)

  • 5-amp motor with 1/2-inch chuck provides up to 1725 rotations per minute.
  • 4-1/4-inch spindle travel creates mortises up to 3 inches in depth.
  • Features a spacious 13-1/2 by 6-inch table and a 10 by 8-inch cast iron base.
  • Onboard tool and chisel storage maximizes organization while keeping bits accessible.
  • Includes three chisel bits (1/4, 3/8, and 1/2 inch), a chuck extension adapter, 3/4-inch chisel bushing, an adjustable handle, spring-loaded cast iron fence, depth stop, and a two-year warranty.
Check Stock

POSENPRO Cordless Electric Screwdriver, 7.2V Rechargeable Power Screwdriver with 48 pcs Accessories, Screw Gun with 6+1 Torque Setting & Twistable Handle for Home DIY, BMC Packing - PCCS24GU

  • ...D light. You can easily work in a dark environment. The 1/4" chuck can quickly replace the screwdriver bit, and you don’t need to worry about the bit falling off during use. TIPS: When installing the drill, you need to move the chuck back and put the drill in. When using a short drill bit, you need to install the extension rod first, and then put the short drill bit into the extension rod.
  • [ GIFT IDEA ] You will get: 1 x 7.2V electric screwdriver, 1500mAh battery, 1 x magnetic soft shaft, 30 x 25mm screwdriver bit, 6 x 50mm screwdriver bit, 8 x socket wrench, 1 x drill bit, 1 x screwdriver bit extension rod, 1 x BMC case , 1 x user manual, 1 x charger. If you have any questions or dissatisfaction during use, you can contact us at any time. We will solve the problem for you, or provide you with a full refund or free exchange.
Check Stock

POSENPRO Cordless Electric Screwdriver wtih 2 Battery, 7.2V Rechargeable Power Screwdriver with 48 pcs Accessories, Screw Gun with 6+1 Torque Setting & Twistable Handle for Home DIY, BMC Packing

  • ...D light. You can easily work in a dark environment. The 1/4" chuck can quickly replace the screwdriver bit, and you don’t need to worry about the bit falling off during use. TIPS: When installing the drill, you need to move the chuck back and put the drill in. When using a short drill bit, you need to install the extension rod first, and then put the short drill bit into the extension rod.
  • [ GIFT IDEA ] You will get: 1 x 7.2V electric screwdriver, 2 x 1500mAh battery, 1 x magnetic soft shaft, 30 x 25mm screwdriver bit, 6 x 50mm screwdriver bit, 8 x socket wrench, 1 x drill bit, 1 x screwdriver bit extension rod, 1 x BMC case , 1 x user manual, 1 x charger. If you have any questions or dissatisfaction during use, you can contact us at any time. We will solve the problem for you, or provide you with a full refund or free exchange.
Check Stock

GALAX PRO 5Amp 1/2-inch Corded Impact Drill with 105pcs Accessories, Variable Speed 0-3000, Hammer and Drill 2 Functions in 1, 360°Rotating Handle, Depth Gauge, Carrying Case Included

  • Professional and widely use: This drill is equipped with a high torque 5 amp motor that makes it ideal for the most demanding projects.
  • 105pcs accessories cover all your needs and equipped with durable carrying case for easy storage.
  • Speed adjustable: Speed Setting Knob and variable speed trigger allow you to control drilling speed and set speed at 0 - 3000 RPM according to your needs.
  • Lock-on button reduces fatigue for long hours work.
  • 1/2 keyed metal chuck: This drill with sturdy and durable metal chuck, its maximum chuck diameter of this impact drill is 1/2''.
  • Customer could replace different drill bits according to different drilling materials.
  • Hammer and drill functions: Equipped with a green dual-mode selector on the top, you can easily convert between hammer and drill function by one button depending on your tasks.
  • What you get: 1 x hammer drill, 20 x screwdriver bits, 60 x drywall plastic anchors with screws, 1 x extension rod, 3 x woodwork drill bit, 21 x drill bit, 1 x depth gauge, 1 x auxiliary handle, 1 x chuck key, 1 x manual, 1 x warranty card.
Check Stock

Brushtech Extra Long Super Flexible Drain Brush, 48-Inch

  • 【Extension Cable】- Connecting the grinding/drilling bits to the 42in long flexible shaft adapter, the job in small and hard-to-reach places will be more easier..
  • 【Adjustable Chuck Head】- Three-claw shaped adjustable chuck head can holds 0.01-1/8"/0.3-3.2mm shaft, makes it suitable for different sizes of bits..
  • 【Ergonomic Design】- The handle of the flex shaft adapter attachment is smooth and comfortable to hold, it is very suitable for carving, sanding and polishing, especially for a long time use..
  • 【Easy to Install】- 1/8"/3.175mm standard connecting rod make it convenient to connect to electric grinder/screwdriver and other device..
  • 【Wide Application】- It can be used with polishing kits, drill bits, wire brushes, countersinks, flap wheels, mounted stones and grinding wheels..
Check Stock

WEN 4214T 5-Amp 12-Inch Variable Speed Cast Iron Benchtop Drill Press with Laser and Work Light

  • Features a 5-amp induction motor, a 12-inch swing, and a 3-1/8-inch spindle travel.
  • Adjust the mechanical variable speed anywhere from 580 to 3200 RPM.
  • Digital speed readout displays current RPM of the machine for maximum precision.
  • Includes a Class IIIA 2.5mW laser, overhead light, adjustable depth stop, table roller extension, beveling 9-1/2 by 9-1/2-inch work table, 5/8-inch capacity keyed chuck, a chuck key with onboard storage, and a two-year warranty.
  • Measures in at 16.8 by 13.5 by 36.6 inches in size with a weight of 85 pounds.
Check Stock

Nintendo Entertainment System: NES Classic Edition (Renewed)

  • EXTENSION CABLE FOR CONTROLLER (2 PACK) - Compatible with Nintendo SNES Classic Mini Edition controllers, NES Classic Mini Edition and Wii remote controller, Wii nun chuck controller..
  • LONGER CABLE - The two SNES power cord are 3M/ 10ft length, which provides the freedom you need to sit back and enjoy playing at comfortable distance. For more joy, you can also connect the two cables to one 6M length to play. Wherever is comfortable, wherever you can stay..
  • SIMPLE TO USE - Just plug & play. The Extension Cable can be used with 2 controllers plugged in to the console simultaneously so both players are able to sit back and relax..
  • PREMIUM QUALITY - This extension cable cord is designed from top quality, sturdy material that will last long and save you money in the long run. Features an easy plug & play operation and works flawlessly well with Mini SNES classic edition..
  • WARRANTY - i-Kawachi provide 12 month warranty service! Professional technical support and best customer service 7 days x 24 hours available..
Check Stock

SEDY 9-Pieces Impact Socket Adapter Set & Magnetic Bit Holder, 1/4\ Hex Shank with 1/4\

  • Each adapter made of heat-treated hardened chrome Vanadium(CR-V) steel, good abrasion resistance and high hardness, without breaking or rusting, deliver on long-lasting strength and durability. Includes a 60mm long bit extension bar with magnetized ends to securely hold 1/4-inch bits..
  • Spring loaded ball bearing on head, designed to fit securely while providing versatility and convenience no matter which tool you use. Compatible with common to heavy duty power tools, drivers, hand wrench, and screwdriver handle tools for flexible uses..
  • ▲4-Pieces 1/4" adapter: 25mm length, 30mm length, 50mm length, 65mm length --- can be converted to 6.35mm square head.
  • ▲2-Pieces 3/8" adapter: 50mm length, 65mm length --- can be converted to 9.53mm square head.
  • ▲2-Pieces 1/2" adapter: 50mm length, 73mm length --- can be converted to 12.7mm square head.
  • ▲1-Pieces 2.5 Inch magnetic bit extension piece with a 1/4-inch bit end..
  • All socket-drive adapter are 1/4” hex shank, hex adapter for square drive, the 1/4" hex shank air impact driver sockets fit all quick change chucks as well as standard drill chucks, fast connect, work on quick change drill chuck, standard drill chuck, handheld screwdriver, electric screwdriver, change your hand socket set into a driver soc....
Check Stock

Flexible Drill Extension Hex Shank Drill Nut Driver Bit Set, 2pcs Bendable Drill Bit Extension, 3pcs 1/4 3/8 1/2\ Universal Socket Adapter Set, 105° Right Angle Drill, 3pcs Screwdriver Bit Set

  • Drill Extension Kit: This set of drill extension kit 9PCS, including 2pcs flexible drill extension, 3 pieces of 1/4 3/8 1/2" universal socket adapter kit, 3*quick release magnetic drill extension Pieces, 1*105° right-angle drill bit extension, a complete match to meet daily needs..
  • Universal Socket Adapter Set: There are 3 pieces of socket adapters in different sizes, 1/4 inch, 3/8 inch, 1/2 inch, but they have the same size hex drill bit, which is 1/4 inch.
  • You can match them with your pneumatic screwdriver, electric screwdriver, pneumatic drill, manual screwdriver and other installation for the hexagonal tool..
  • Hex Shank Flexible Drill Extension: It come with a 105° right angle drill extension bit and a 11.7 in flexible extension bit.easy, lightweight, fast, connect to the standard hex screwdriver..
  • Screwdriver Bit: 1/4 Inch Hex Shank Magnetic Extension Chuck Adapter Quick Release Bar Socket Screwdriver Bit Holder | 60mm/ 100mm/ 150mm Length,Suitable for electric, pneumatic screwdrivers and other screwdriver bits of power tools, drill extended..
  • Widely Used: Installed in the installation of pneumatic screwdrivers, electric screwdrivers, pneumatic drills, manual screwdrivers and other hexagonal tools. A must-have package for conversion. Sufficient qua....
Check Stock