Top External Board

Ab Board Abdominal Liposuction Foam Op Lipo Surgery Abdominal Compression Board Gray

  • BEST&SOFT MATERIAL：This ab board post surgery liposuction Ab lipo board made out of Polystyrene，which has soft seams that won't irritating your skin and incisions, fast-drying external lining protect you and your tummy from the discomfort..
  • GREAT DEVICE DESIGN: It is nice, sturdy and has a perfect thick size, Foam board post lipo it can be worn under any tight girdle or bodyshaper for tummy flattening. The abdominal board Works fantastically by keeping everything in its right place, curved design to fit your belly perfectly..
  • COMPRESSION FOR POST OP RECOVERY：Wearing this lipo foams and boards will help out in the recovery process, tummy board give you a really tight fit that compress the upper and lower abdomen area, help accelerate healing, reduce swelling and bloating. It applies pressure to liposuctioned areas to ensure that flattened abdomen resolves faster..
  • AN UNDERCOVER TUMMY FLATTENING DEVICE - This liposuction bbl ab board is ergonomic and when placing a post surgery compression garment on, lipo compression board will become virtually invisible underneath. You will be able to wear your favorite outfits without anybody noticing..
  • GOOD CHOICE: This post surgery foam exerts the pressure necessary to avoid formation of fibrosis or bruising aft....
Check Stock

HiLetgo EGS002 Pure Sine Wave Inverter Drive Board SPWM EG8010+IR2110+LCD Module

  • EGS002 Pure Sine Wave Inverter Drive Board.
  • External Serial LCD Module 1602 displays.
Check Stock

Peavey VYPYR® X1 Guitar Modeling Amp

  • 36 on-board amp models including 6 acoustic and 6 bass amp models.
  • 12 stompbox effects with dual parameter control.
  • On-board looper with optional Sanpera(tm) footswitch.
  • 3.5mm aux in for connecting external audio sources.
Check Stock

KEYESTUDIO MEGA Sensor Shield V1 for Arduino MEGA R3 2560 Prototype Board Projects

  • Nice Sensor shield of MEGA Rev3, Easy prototyping and Very convenient especially for 3PIN (G V S) connections. There are tons of ground and VCC headers making really it easy to connect various Arduino modules and sensors with DuPont style cables..
  • This sensor shield board really simplify the circuit and easily connect commonly used sensors.The board is having digital and analog interface, Bluetooth module communication interface, SD Card module communication interface, APC 220 radio frequency module interface, etc..
  • This sensor shield allows ease development and prototyping and makes convenient way to connect many external devices/sensors..
  • This board works well for prototyping or certain permanent applications and a very handy companion to an Mega Rev3 or compatible board..
  • 100% Compatible with the programming software for Arduino. Excellent shield board in good quality and packaged in a nice box! Great for all kinds of scientific experiment research for Arduino.
Check Stock

309520-001 - HP Smart Array 6402 Dual-channel SCSI RAID Controller 309520-001

  • Smart Array 6402 / 6404 (base board) Ultra320 SCSI controller.
  • Has two internal or two external Ultra320 SCSI channels.
  • 133MHz PCI-X interface with RAID XOR engine.
  • Does not include cache memory module or dual channel daughter board.
Check Stock

Franke EDOX33229-1 Sink, 33\ x 22\ x 9\ deep, Onyx

  • Number of chambers: 1. Cut in countertop by template: no. Drainer position: reversible model. Additional information: hidden transfer. Cut in countertop: 764 x 484 mm..
  • External dimensions: 780 x 500 mm. Dimensions of the main bowl: 350 x 430 x 180 mm..
  • With draining board, Auto Plug, round knob, stainless steel/Silky Sheen.
Check Stock

SparkFun Pro Mini ATmega328-5V/16MHz Development Board Compatible with Arduino Boards and IDE

  • ATmega328 running at 16MHz with external resonator (0.5% tolerance).
  • No USB connection off board. Need FTDI board (or similar device) to program..
Check Stock

BURTON Unisex s Wheelie Gig Bag Board True Black 146

  • Main compartment with easy full-zip access.
  • padded shoulder strap is removable for convenience.
  • Internal webbing straps hold your board in place.
  • side and front haul handles for easy carrying.
  • External zippered accessory pocket for additional storage.
  • axiom skate wheel system provides smooth rolling.
  • Lockable, contoured zipper pulls accommodate TSA-Approved locks.
Check Stock

AITRIP 10PCS for Nano V3.0 ATmega328P Nano Board CH340 5V 16M Microcontroller Board, Compatible with Arduino Electronics Development Board

  • This board is using the chips ATmega328P and CH340, not FT232 as official Arduino.
  • More Breadboard Space:Nano's got the breadboard-ability of the Boarduino and the Mini USB with smaller footprint than either, so users have more breadboard space. It's got a pin layout that works well with the Mini or the Basic Stamp (TX, RX, ATN, GND ）on one top, power and ground on the other..
  • The Nano can be powered via the Mini-B USB connection, 7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source..
  • It is a smallest, complete, and breadboard friendly board. It has everything that Diecimila/Duemilanove has (electrically) with more analog input pins and onboard +5V AREF jumper..
  • you will get 10pcs Mini Nano V3.0 ATmega328P 5V 16M Microcontroller.
Check Stock

AUNE X1s GT DAC with Headphone AMP, PLL Technology Desktop HiFi Decoder

  • ...GT uses a high-performance PLL chip of ADI. The jitter is very low. It took half a year to finish the whole program design. The PLL core outputs low-jitter clock signals according to the music currently being played simultaneously to XMOS and DAC. Therefore, the digital signals are better..
  • Clock synchronization and External clock input technology: The X1s GT supports 10M external clock input. And it achieves clock synchronization of the whole device. The clock signals from PLL are synchronized by XMOS and ES9038Q2M. The DAC is working in the synchronized mode. PLL works in all digital input modes: USB, coaxial, optical..
  • Complex Fully-discrete Headphone AMPs: The X1s GT’s amp board has 4 fully-discrete headphone amplifiers. 277 parts and components in total, among which, 96 are BJTs. It uses ±9v power supply. It’s a “huge” amp board compared to those of the same level DACs with amps. The hardware performance is outstanding..
  • Unique Filter Modes: Instead of using the ES9038 series’ default filter modes, we designed 4 filter modes for the X1s GT with our own algorithm. The X1s GT was designed to be a special product. It must have its characteristics and they show our understanding of music..
  • GT Concept: We put our hearts in it. According to the....
Check Stock

MakerFocus Raspberry Pi 4 Battery Pack UPS, RPI Pack Standard 4000mAh Raspberry Pi Battery USB Pack Raspberry Pi Latest Version V3Plus Expansion Board Power Supply Type-C for RPI 4B 3B+ 3B 2B+

  • Support charge while discharge: It will not affect the output of UPS power supply when external power outage. Note: If you use UPS to supply power for Raspberry Pi3b/3B+ when it is charging, please ensure that the input power is not lower than 2.5A. Recommended Use: 3V 2.5A power supply. ★Document link and Assemble video: Please get the link from the product description below.
  • Two power modes: Outdoor portable model and Indoor UPS power Supply mode: 1) As an outdoor portable power supply, the motherboard is powered by a lithium battery. and he maximum external power supply capacity is: 5.1V. 2.5A. 2)As an indoor UPS power supply mode: MicroUSB plugs into a normal 5V 2A power adapter, and the external output interface(USB-A interface) can output a maximum of 5.1V.3A. Battery size: 70mm x 41mm x 9.5mm.
  • 4+2LED are designed to show the status of battery power, charge or discharge:1) 4 Battery power LEDs: Used to show the current battery voltage and power. 2)The function of the Power LED is to display whether the UPS is supplying power to the Pi, and the LED is on: it means the output is 5V. LED off: Indicates that there is no voltage at the output. 3) Charge charging indicator LED: When the UPS is externally charged via the TYPE-C USB interface, the Char....
Check Stock

AITRIP Pro Micro ATmega32U4 5V/16MHz Module Board, Replace with ATmega328 Pro Mini Compatible with Arduino with 2 Row pin Header 10pack

  • ATmega32U4 microcontroller: The Pro Micro is similar to the Pro Mini except with an ATmega32U4 on board. The USB transceiver inside the 32U4 allows us to add USB connectivity on-board and do away with bulky external USB interface..
  • The acceptable voltage range is 5 to 9 V..
  • On-Board micro-USB connector for programming.
  • This tiny little board does all of the neat-o tricks that you're familiar with: 4 channels of 10-bit ADC, 5 PWM pins, 12 DIOs as well as hardware serial connections Rx and Tx. Running at 16MHz and 5V, this board will remind you a lot of your other favorite pro-compatible boards but this little guy can go just about anywhere. If you're supplying unregulated power to the board, be sure to connect to the "RAW" pin on not VCC..
  • This latest revision corrects the silk error from the last version of the board so that pin 14 is correctly labeled. We've also added a PTC fuse and diode protection to the power circuit and corrected the RX and TX LED circuit..
Check Stock