Top External Motor

RAMPS 1.4 Controller + MEGA2560 R3 Board + 5pcs Soldered A4988 Stepper Motor Drivers + 5pcs Heat Sinks + 19pcs Jumpers with USB Cable for RepRap 3D Printer Kit

  • SAVING SPACE: The RAMPS 1.4 board is designed to fit the entire electronics needed for a RepRap in one small package. So it can save space and cost..
  • SCALABLE: RAMPS interfaces an Mega with the powerful MEGA platform and has plenty room for expansion. A number of expansion boards can be added to the system as long as the main RAMPS board is kept to the top of the stack..
  • EASY TO USE: Using the bootloader, you can download the program directly via USB without using other external writers. Development IDE interface is based on open-source principles, allows you to free download for use in project work, school teaching, motor control, interactive works..
  • MODULAR DESIGN: The modular design includes plug in stepper drivers and extruder control electronics on an MEGA shield for easy service, part replacement, upgrade-ability and expansion..
  • POWER SUPPLY AND DRIVER: Supply part of the optional USB power, or as an external power using the AC-to-DC adapter and battery. This stepper motor driver lets you control one bipolar stepper motor at up to 2 A output current per coil..
Check Stock

3450RPM 5HP Air Compressor Motor P56 Frame Single Phase Motor for 208-230 Volts Electric Air Compressor Motor

  • ❤【Great Function】--High working efficiency. The maximum speed at which the compressor motor 56 can run is 3450RPM, which greatly improves the efficiency of the work and saves your working time..
  • ❤【Long service life】--The air compressor motor is designed with multiple heat dissipation holes with good heat dissipation performance, which can quickly dissipate heat, prevent the machine from being damaged by overheating, and prolong the service life of the motor.
  • ❤【Premium Quality】--The housing and mounting bracket are made of high quality steel, which can well protect the motor from the external environment, ensure the stability and durability of the motor, and prevent the bracket from being unstable and dropping the motor..
  • ❤【Buy Confidence】-- For any reason you're not completely satisfied. Please feel free to contact us, we will solve the problem for you at the first time. Buy it with confidence!.
Check Stock

[4-Pack] MG996R 55g Metal Gear Torque Digital Servo Motor for Futaba JR RC Helicopter Car Boat Robot

  • This MG996R Servo motor which updated from SG90 and MG90S micro servo motor. (the Speed, Tension and Accuracy all increase).
  • The MG996R model compliant with most standard receiver connector,for Futaba, Hitec, Sanwa, GWS etc..
  • Power Supply: Through External Adapter. Stable and Shock Proof. Coreless Motor , Metal Gear ..
  • Torque at 6V 12kg/cm, 7.2V 13kg/cm.(Recommended voltage: 5V, current usage: 3A ). Positioning speed at 4.8V without load 0.17s / 60 degrees.
  • Universally Applicable: Micro Servo Motor for 1:10 RC car robot helicopter servo remote controlled aircraft and suitable for most DIY projects..
Check Stock

[2-Pack] MG996R 55g Metal Gear Torque Digital Servo Motor for Futaba JR RC Helicopter Car Boat Robot

  • The MG996R model compliant with most standard receiver connector,for Futaba, Hitec, Sanwa, GWS etc..
  • This MG996R Servo motor which updated from SG90 and MG90S micro servo motor. (the Speed, Tension and Accuracy all increase).
  • Power Supply: Through External Adapter. Stable and Shock Proof. Coreless Motor , Metal Gear ..
  • Torque at 6V 12kg/cm, 7.2V 13kg/cm.(Recommended voltage: 5V, current usage: 3A ). Positioning speed at 4.8V without load 0.17s / 60 degrees.
  • Universally Applicable: Micro Servo Motor for 1:10 RC car robot helicopter servo remote controlled aircraft and suitable for most DIY projects..
Check Stock

ACEIRMC 8pcs L298N Motor Driver Controller Board DC Dual H-Bridge Robot Stepper Motor Control and Drives Module for Arduino Smart Car Power MEGA R3 Mega2560

  • When you are driving voltage (above logo for the 12 v input, can actually accept input range is 7 to 12 v) for 7 v to 12 v, can make to onboard power supply 5 v logic, when using the onboard after 5 v power supply, interface of + 5 v The power supply does not input voltage, but can yield 5V voltage for external use..
  • The chip manual proposes to support 35V, but according to the book When the maximum voltage is applied to the maximum voltage of 298 conservative applications to 24V, for example, the motor with a rated voltage of 18V shall be driven.
  • Great for for Arduino DIY Smart Car Robot Power MEGA R3 Mega2560 Duemilanove, if driving voltage is more than 12V, use external standard 5volt TTL outputs to switch the H-bridge circuits.
  • No assembly required. This L298N board comes ready to go. Just wire up motors and power, easy to use.
  • Double H bridge design, can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors, high efficient.
Check Stock

Vibco BVS-250 Silent Pneumatic Turbine Vibrator, 480 lb. Force, 7200 VPM, 9 CFM, 60 to 80 psi, Threaded Exhaust, 5\ Bolt Pattern

  • [Application]: Permanent magnet DC motor can be applied in cotton candy machine, small cutting bench, grinding machine, medical equipment and other mechanical equipment.
  • [Low Noise]: It drives up the super smooth, almost no noise.
  • [High Speed]: This motor features high speed 3500rpm and large torque.
  • [Feature]: The stator windings of the motor are copper wire, CW/CCW control.
  • Need for external direct current governor, it can achieve speed adjustment function.
  • [Application]: This permanent magnet DC motor is ideal for DIY generator.
  • Can be applied in cotton candy machine, small cutting bench, grinding machine, medical equipment and other mechanical equipment.
Check Stock

MELIFE 5Pack L298N Stepper Motor Driver Controller Board Dual H Bridge Module for Arduino Smart Car Power UNO MEGA R3 Mega2560

  • Main driver chip L298N, strong driving ability, strong anti-interference, low calorific value, afterflow diode protection, more stable and reliable for Arduino projects.
  • Double H bridge design, can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors, high efficient.
  • No assembly required. This L298N board comes ready to go. Just wire up motors and power, easy to use.
  • External size 43*43*27mm / 1.69*1.69*1.06 inch, voltage 5V-35V, drive current 2A (Max single bridge).
  • Great for Arduino DIY Smart Car Robot Power UNO MEGA R3 Mega2560 Duemilanove. If driving voltage is more than 12V, please use external standard 5volt TTL outputs to switch the H-bridge circuits.
Check Stock

FREESEA Fish Tank Aquarium Filter 9W 135GPH External Canister Aquarium Filter Ultra Quiet Three-Layer Filtration for 20-60 Gallon Fish Tank Desktop & Hang On Filter

  • High Efficiency & Large Flow: Aquarium external filter is specially designed for turtle tanks, fish tanks and aquarium terrariums. The floating....
  • External Multiple Filtration: Aquarium filter adopts a dual-chamber U-shaped flow channel design, with three powerful filter media of mechanical,....
  • Two Ways to Use: The canister aquarium filter adopts two ways of hanging installation and lengthening hose ( 24.8 inch ) vertical installation, which....
  • Ultra Quiet & Prevent Leakage: The aquarium filter has a super motor, but its sound is less than 28 decibels. The ultra quiet hanging power filter is....
  • Detachable & Cleanable: The aquarium filter is easy to install and remove. The motor can be separated from the filter cartridge, and the filter....
Check Stock

Mophorn 1800W Electric Brushless DC Motor Kit - 48V 4500rpm Brushless Motor with 32A Speed Controller and Throttle Grip Kit for Go Karts E-Bike Electric Throttle Motorcycle Scooter

  • [Wide Usage]: This permanent magnet DC motor can be applied in cotton candy machine, small cutting bench, grinding machine and other equipment.
  • [Low Noise]: This DC electric motor drives up super smooth, almost no noise, safe to use.
  • [Optional]: This motor features high speed 3500/7000rpm and large torque.
  • [Adjustable Speed]: The stator windings of the motor are copper wire, CW/CCW control.
  • Need for external direct current governor, it can achieve speed adjustment function.
  • [Application]: This permanent magnet DC motor is ideal for DIY generator.
Check Stock

Kitchen Ventilation Low

  • DURBALE EXTERNAL BLOWER: External in-line blower for Broan range hoods provides high ventilation and durable construction to meet the needs of your....
  • STRONG OPERATION: Performs at 600 CFM and has a 120 voltage rating for an effective production.
  • EASY INSTALLATION: Unit installs remotely in the interior of the home and can use 8-position mounting brackets or be suspended with special suspension....
  • HIGH QUALITY: Specially designed resilient motor mounts and housing isolation mounts prevent vibration noise to ensure quiet operation.
  • CUSTOMIZABLE DUCT: Flexible duct design allows straight-through or right-angle connections with built-in damper and includes 10" round ductwork....
Check Stock

FW Sewing Machine Motor Kit with Foot Pedal & Belt - 110 Volt, 100 Watt for Imported & Domestic Home Sewing Machines (White)

  • Universal home sewing machine motor with foot control pedal. Counterclockwise rotation. 110 volts - 100 watts - 50/60 hertz - 6000RPM..
  • Heavy duty motor and sturdy L-bracket mount, fits most domestic and imported home sewing machines. Kit includes foot pedal speed controller, belt and replacement carbon brush set..
  • Fitment: Fits most of the older machines where the motor bolts on the side of the machine or under the fly wheel such as the Singer 15, HA1,66, 99, 185, 285, 293B, 206, 306, 319, 238, 239, 242, 247, 248, 252, 257, 258 and more. Fits most Japanese machines with external motors..
  • The motor are available in the following models: RM100N is a counterclockwise for multifunction machine making straight stitch, zig-zag, buttonholes, etc. You also may use for: -Spooling, spooler fishing line. -Watchmaker's lathe..
  • Package included: 1x Sewing Machine Motor 1x Controller 1x Instruction Some Accessories.
Check Stock

Newport NV-Series 55lb Thrust Saltwater Transom Mounted Trolling Electric Trolling Motor w/LED Battery Indicator & 30" Shaft & Newport Trolling Motor Smart Battery Box Power Center

  • ... The Nv 55Lb Motor Requires One (1) 12V Lead-Acid Deep Cycle Or Lithium Deep Cycle Battery (Battery Not Included), 50Ah Recommended. The Motor Also Includes A 50Amp Circuit Breaker Which Is Recommended At All Times To Protect From Battery Voltage Surges. Max Amp Draw: 52A.
  • EXTERNAL BATTERY PORTS - Safely and easily connect your trolling motor or accessory to the battery ports without opening the box..
Check Stock