Top Extra Wide Clamps

FAMIKITO Slide Out Keyboard Tray Under Desk, Adjustable Keyboard Tray with Extra Sturdy C-Clamp Mount System Pull Out Keyboard Stand Ergonomic with Sponge Pad 26' (30' Including Clamps) X 10' Black

  • 【Save Desk Space】- This 25.6" (30" including clamps) x 10" adjustable keyboard tray with extra-wide surface fits holds your keyboard, mouse, and other small accessories below the desktop for added work space..
  • 【Sturdy C-Clamps】- The pull out keyboard tray under desk with sturdy c-clamps, which have protective rubber pads that securely holds the keyboard tray without damaging the desktop. Please Note: The total length from clamp to clamp is 30" and the clamp height is 2.5", so please make sure you have that much space on your desk before purchasing..
  • 【Comfortable Typing Angles】- Lap tray for keyboard and mouse easily slide the tray in and out with easy to clean leatherette covered gel wrist rest which can help you enjoy ergonomic typing angles that relieve stress on your wrists and shoulders..
  • 【Easy Installation】- All hardware and instructions are provided for assembly, and mounting your keyboard tray to the desk is an easy process with the adjustable clamps. The tray holds weights up to 11 lbs and provides enough room for small to standard-size keyboard trays..
  • 【We've Got You Covered】- This sliding keyboard tray comes with a limited 1-year Manufacturer Warranty, as well as friendly tech support to help with any questions or concerns..
Check Stock

18PCS Hose Clamps Stainless Steel Sheboren Clamping Range 1/2\ to 1-1/4\(12mm-32mm), 1/2’' Hose Clamps, 3/4'', 1’’ Hose Clamps SAE 12 Worm Gear Hose Clamps for Automotive Plumbing

  • 【Hose Clamps Specification:】With 1/2’’ (12.7mm) band width, 1/4’’ (6.35mm) hex head screw, these SAE size #12 hose clamps have adjustable clamping range of 1/2" to 1-1/4"(12mm-32mm), fit hoses within this range, great as 1/2 inch hose clamps, 3/4 inch hose clamps, 5/8 inch hose clamps,7/8 inch hose clamps, 1 inch hose clamps, 1 1/4 inch hose clamps etc. The average torque of the hose clamps is 10.5N, much higher than the standard torque 6.78N..
  • 【Durable Quality& Premium Materials:】All the hose clamps including the band, housing and screw are made of 304 stainless steel. These worm gear hose clamps are salt resistant, acid resistance, anti rust, anti-corrosion, waterproof and oil proof. These SAE standards compliant hose clamps are sturdy, strong and durable, you’ll never need worry about rusting or breaking..
  • 【Effortless Installation& Easy to Operate:】These 1 inch hose clamps are of beautiful shape, precision polishing with smooth surface without burrs. You can install the hose clamps without any effort: use a slotted screwdriver to loosen or tighten the screw of hose clamps then adjust the size, thread the pipes through the hose clamps, tighten the screw and hose clamps in place..
  • 【Wide Applications, Save Time and Money:】These....
Check Stock

Dr.Booster Super Heavy Duty Booster Cables, 2 Gauge, Extra Long 25 FT, 800 AMP. Best Jumper Cables For Your Car and Truck Battery. With Free Carrying Case and Pair of Working Gloves

  • ...ar with ease even in the most awkward breakdowns with these 25-foot extra-long cables..
  • JUMPSTART YOUR VEHICLE FAST! With a 2 gauge cable and a capacity of up to 800 AMP these heavy duty jumper cables will bring back to life the “deadest” of batteries in a matter of minutes..
  • THE PERFECT PERFORMANCE, EASY-TO-OPEN CLAMPS WITH A TIGHT STRONG GRIP: With a firm squeeze you can open these clamps wide enough to grab even the most elusive battery connection and hold with a strong tight bite. Plus, it comes with precise, clear instructions so even a first-time car owner can do it..
  • COLOR CODED AND PVC COATED: Dr.Booster Clamps are color-coded, red/black, to keep you from accidentally crossing wires. They are PVC coated and made from heavy duty copper, so that they are durable and non-cracking even at frigid sub-zero temperatures.
  • CONVENIENT CARRYING CASE:Tired of having to roll up those cables so perfectly to fit them into their round case? Dr.Booster cables come in a rectangular shaped, roomy, nylon carrying case for easy removal and packing away..
Check Stock

20PCS Hose Clamps Stainless Steel Sheboren Clamping Range 1/2\ to 1-1/16\(12mm-27mm), 1/2’' Hose Clamps, 3/4'', 1’’ Hose Clamps SAE #10 Worm Gear Hose Clamps for Automotive Plumbing

  • 【Hose Clamps Specification:】With 5/16’’ (8mm) band width, 1/4’’ (6.35mm) hex head screw, these SAE size #10 hose clamps have adjustable clamping range of 1/2" to 1-1/16"(12mm-27mm), fit hoses within this range, great as 1/2 inch hose clamps, 3/4 inch hose clamps, 5/8 inch hose clamps,7/8 inch hose clamps, 1 inch hose clamps etc. The average torque of the hose clamps is 9.5N, much higher than the standard torque 6.78N..
  • 【Durable Quality& Premium Materials:】All the hose clamps including the band, housing and screw are made of 304 stainless steel. These worm gear hose clamps are salt resistant, acid resistance, anti rust, anti-corrosion, waterproof and oil proof. These SAE standards compliant hose clamps are sturdy, strong and durable, you’ll never need worry about rusting or breaking..
  • 【Effortless Installation& Easy to Operate:】These 1 inch hose clamps are of beautiful shape, precision polishing with smooth surface without burrs. You can install the hose clamps without any effort: use a slotted screwdriver to loosen or tighten the screw of hose clamps then adjust the size, thread the pipes through the hose clamps, tighten the screw and hose clamps in place..
  • 【Wide Applications, Save Time and Money:】These 3/4’’ hose clamps can....
Check Stock

Lot of 24-6\ inch Clamp Large Heavy Duty Spring Metal - 2.5 inch Jaw opening

  • 6"-length clamps with extra-wide Heavy Duty.
Check Stock

AIPRODA Micro Hose Clamp Adjustable 304 Stainless Steel Duct Clamps,Worm Gear Adjustable Hose Clamp 27-51mm Pack of 6

  • 【PACKAGE】 6 piece 1 to 2 inches(27-51mm) hose clamps.
  • 【WIDE ADJUSTABLE SIZE RANGE】Clamp kit are flexible and ductile with wide adjustable size range from 27 to 51mm. So many sizes are enough for daily needs..
  • 【HIGH QUALITY 】---- High quality 307 Stainless Steel hose clamp, Can resist the corrosion and rust in marine environments. The hole technology makes its screw tightly bite the steel band..
  • 【WORKING GREAT】 ---- These hose clamps are just what you need when you have to make repairs to your home or automobile. It comes with a wide variety of clamp sizes so you don't have to concerned about which size you need, you can just try it until it fits. These hose clamps did get the job done well, no leaking at all..
  • 【WIDELY USED】 Clamps are used in securing hoses, pipe, cable, tube, fuel lines etc. Perfect to apply in automotive, industrial, boat/marine, shield, household etc. both indoor or outdoor..
Check Stock

AIPRODA Micro Hose Clamp Adjustable 304 Stainless Steel Duct Clamps,Worm Gear Adjustable Hose Clamp 6-12mm Pack of 20

  • 【PACKAGE】 20 piece 1/5 to 1/2 inches(6-12mm) hose clamps.
  • 【WIDE ADJUSTABLE SIZE RANGE】Clamp kit are flexible and ductile with wide adjustable size range from 6 to12mm. So many sizes are enough for daily needs..
  • 【HIGH QUALITY 】---- High quality 304 Stainless Steel hose clamp, Can resist the corrosion and rust in marine environments. The hole technology makes its screw tightly bite the steel band..
  • 【WORKING GREAT】 ---- These hose clamps are just what you need when you have to make repairs to your home or automobile. It comes with a wide variety of clamp sizes so you don't have to concerned about which size you need, you can just try it until it fits. These hose clamps did get the job done well, no leaking at all..
  • 【WIDELY USED】 Clamps are used in securing hoses, pipe, cable, tube, fuel lines etc. Perfect to apply in automotive, industrial, boat/marine, shield, household etc. both indoor or outdoor..
Check Stock

Winlong Stainless Steel Hose Clamps - 24 Pack Worm Gear Drive Hose Clamps Micro Size 4 Clamping Range 1/4 Inch to 5/8 Inch 6mm-16mm for Automotive Plumbing 1/4 Hose Clamps 1/2 Hose Clamps

  • Premium Materials: Winlong hose clamps are all 304 stainless steel ( including band, housing and screw) to provide maximum corrosion resistance to salt and most chemicals. The worm drive hose clamps comply with SAE standards. Winlong stainless steel hose clamps are salt resistant, anti-rust, anti-corrosion, water proof and oil proof.
  • Winlong hose clamps are reliable, strong, reusable and durable..
  • Remarkable Performance: Winlong size 4 stainless steel 6-16mm hose clamps are high torque, easy to install, adjustable range, secure hold and smoothly drive. The size #4 hose clamps have clamping range from 1/4 inch to 5/8 inch (from 6mm to 16mm), great for hose or pipes within this range, perfect as 1/4 inch hose clamps, 3/8 inch hose clamps, 7/16 inch hose clamps, 1/2 inch hose clamps etc. The average torque of the hose clamps is 3.9N, much higher than the standard torque 2.26N..
  • Effortless Installation: Winlong hose clamps are designed with through-hole process, even slotted holes, steel belt through hole, tight locking and strong torsion force. The stainless steel hose clamps have stronger tightening force and and easy to install. Winlong worm gear hose clamps are beautiful shape, precision polishing with smooth surface without burrs..
Check Stock

Washing Machine Drain Hose | 12 Foot | Universal Fit | Heavy Duty Discharge Hose for Washer

  • ✅ 3 EXTRA STRONG 304 STAINLESS STEEL CLAMPS INCLUDED – Once the desired size is cut, place hose over the outlet stub on the washer and firmly attach the 3 high quality grade 304 clamps to ensure a tight secure fit. Gone are the days of those flimsy thin weak clamps!.
  • ✅ UNIVERSAL OUTLET – Simply trim the drain hose with scissors to the required size – fits 1 inch, 1+1/8 inch, or 1+1/4 inch in diameter including Whirlpool, Samsung, Kenmore, GE, LG, Maytag, and many other brands..
  • ✅ 12 FT LONG – Our extra long flexible hose means that you can reach your outlet drains with ease and won’t have to worry where to place your washer..
  • ✅ SADDLE HOOK HOLDER – To prevent your hose from sliding, use our saddle hook holder with confidence that your discharge water drains into your sink or drain..
  • ✅ EXTREMELY DURABLE – Heavy duty corrugated design for extra durability to get your hose into hard to reach places..
Check Stock

AIPRODA Micro Hose Clamp Adjustable 304 Stainless Steel Duct Clamps,Worm Gear Adjustable Hose Clamp 19-29mm Pack of 10

  • 【PACKAGE】 10 piece 0.75 to 1.14 inches(19-29mm) hose clamps.
  • 【WIDE ADJUSTABLE SIZE RANGE】Clamp kit are flexible and ductile with wide adjustable size range from 19 to 29mm. So many sizes are enough for daily needs..
  • 【HIGH QUALITY 】---- High quality 306 Stainless Steel hose clamp, Can resist the corrosion and rust in marine environments. The hole technology makes its screw tightly bite the steel band..
  • 【WORKING GREAT】 ---- These hose clamps are just what you need when you have to make repairs to your home or automobile. It comes with a wide variety of clamp sizes so you don't have to concerned about which size you need, you can just try it until it fits. These hose clamps did get the job done well, no leaking at all..
  • 【WIDELY USED】 Clamps are used in securing hoses, pipe, cable, tube, fuel lines etc. Perfect to apply in automotive, industrial, boat/marine, shield, household etc. both indoor or outdoor..
Check Stock

AIPRODA Micro Hose Clamp Adjustable 304 Stainless Steel Duct Clamps,Worm Gear Adjustable Hose Clamp 13-19mm Pack of 10

  • 【PACKAGE】 10 piece 0.51 to 0.75 inches(13-19mm) hose clamps.
  • 【WIDE ADJUSTABLE SIZE RANGE】Clamp kit are flexible and ductile with wide adjustable size range from 13 to19mm. So many sizes are enough for daily needs..
  • 【HIGH QUALITY 】---- High quality 305 Stainless Steel hose clamp, Can resist the corrosion and rust in marine environments. The hole technology makes its screw tightly bite the steel band..
  • 【WORKING GREAT】 ---- These hose clamps are just what you need when you have to make repairs to your home or automobile. It comes with a wide variety of clamp sizes so you don't have to concerned about which size you need, you can just try it until it fits. These hose clamps did get the job done well, no leaking at all..
  • 【WIDELY USED】 Clamps are used in securing hoses, pipe, cable, tube, fuel lines etc. Perfect to apply in automotive, industrial, boat/marine, shield, household etc. both indoor or outdoor..
Check Stock

WINL Stainless Steel Hose Clamps - 16 Pack Worm Gear Drive Hose Clamps SAE 16 Clamping Range 3/4 Inch to 1-1/2 Inch (19mm-38mm) for Automotive Plumbing, 3/4'', 1'', 1 1/4'' Hose Clamps

  • Premium Materials: WINL SAE 16 hose clamps of 19mm-38mm are all 304 stainless steel ( including band, housing and screw) to provide maximum corrosion resistance to salt and most chemicals. The worm drive hose clamps comply with SAE standards. WINL stainless steel hose clamps are salt resistant, anti-rust, anti-corrosion, water proof and oil proof.
  • WINL hose clamps are reliable, strong, reusable and durable..
  • Remarkable Performance: WINL stainless steel hose clamps are high torque, easy to install, adjustable range, secure hold and smoothly drive. The SAE size #16 hose clamps have clamping range from 3/4 inch to 1-1/2 inch (from 19mm to 38mm), great for hose or pipes within this range, perfect as 3/4 inch hose clamps,7/8 inch hose clamps,1 inch hose clamps,1 1/5 inch hose clamps, 1 1/4 inch hose clamps etc. . The average torque of the hose clamps is 10.5N, much higher than the standard torque 6.78N..
  • Effortless Installation: WINL size 16 hose clamps are designed with through-hole process, even slotted holes, steel belt through hole, tight locking and strong torsion force. The stainless steel hose clamps have stronger tightening force and and easy to install. WINL worm gear hose clamps are beautiful shape, precision polishing with smooth surface without ....
Check Stock