Top Extreme Torque Bolts

PRO BIKE TOOL 1/4 Inch Drive Click Torque Wrench Set – Inch Pound Nm Dual Readout – Bicycle Maintenance Kit for Road & Mountain Bikes - Includes Allen & Torx Sockets, Extension Bar & Storage Box

  • Precision Torque Measurement - Install components with calibrated precision – 20 to 150 Inch Pound torque range (2.2 to 16.9 Nm) with micro adjustment to 1. Helps ensure that the fittings are tightened to the correct torque, and that clamping forces are distributed evenly across clamping surfaces. This helps prolong the life of high-performance components and prevents damage from over tightening. Ideal for use on stems, seat clamps, lever clamps, chain sets, rotors and headsets..
  • Peace Of Mind Protect Your Investment – Over-tightening bolts can cause expensive damage to your bike. Applying too little torque can lead to bolts working loose or not doing their job. Our 1/4-inch drive dual-direction torque wrench driver removes the guesswork, making it easy to follow the manufacturer’s recommended settings. Each hand tool is shipped pre-calibration tested for accuracy, +/- 4% (clockwise) and +/- 6% (counter clockwise)..
  • Safe & Easy To Use & Read – Spring loaded adjustment collar automatically ‘locks’ in place at the desired torque setting, ensuring it will not accidentally slip when being used. High-contrast In-Ib (main readout) & Nm read-out scales are easy to read – Wrench emits a ‘click’ that can be ‘heard and/or felt’ when the pre....
Check Stock

PRO BIKE TOOL 1/4 Inch Drive Click Bike Torque Wrench Set – 2 to 20 Nm – Bicycle Torque Wrench Maintenance Kit for Road & Mountain Bikes - Includes Allen & Torx Sockets, Extension Bar & Storage Box

  • Precision Torque Measurement - Install components with calibrated precision - 2.0 to 20.0 Newton Meter torque range with micro adjustment to 0.1. Helps ensure that the fittings on your bike are tightened to the correct torque, and that clamping forces are distributed evenly across clamping surfaces. This helps prolong the life of high-performance components and prevents damage from over tightening. Ideal for use on stems, seat clamps, lever clamps, chain sets, rotors and headsets..
  • Peace of Mind Protect Your Investment – Over-tightening bolts can cause expensive damage to your bike. Applying too little torque can lead to bolts working loose or not doing their job. Our 1/4-inch drive dual-direction torque wrench driver removes the guesswork, making it easy to follow the manufacturer’s recommended settings. Each hand tool is shipped pre-calibration tested for accuracy, +/- 4% (clockwise) and +/- 6% (counter clockwise)..
  • Safe & Easy to Use & Read – Smooth and precise operation. Spring loaded adjustment collar automatically ‘locks’ in place at the desired torque setting, ensuring it will not accidentally slip when being used. High-contrast Nm scale is easy to read. Wrench emits a ‘click’ that can be ‘heard and/or felt’ when the pre-set to....
Check Stock

Fel-Pro ES 72856 Cylinder Head Bolt Set

  • Meets or exceeds all original equipment specifications.
  • Application specific design to ensure a perfect fit.
  • Avoid risk associated with re-use of T-T-Y (torque to yield) head bolts.
  • Properly torque bolts per manufactures specifications.
  • Follow recommended tightening sequence for head bolts.
  • Check bolt length for correct application needed.
  • Follow all vehicle manufacturers recommendation procedures for head bolt replacement.
Check Stock

Permatex Bolt Mark Tamper-Proof Indicator Paste – Orange, 21262

  • Ideal for Oil pan bolts, Belt tensioner bolts, Pulley bolts, Alternator mount bolts, Valve cover bolts, Heavy equipment bolts, Suspension bolts, Gear bolts, Transmission shaft bolts, and MRO applications.
Check Stock

Ryobi P263K 18V Cordless 3/8 in. Impact Wrench Kit with 1.5 Ah Battery and Charger

  • Includes: Battery, Charger, and Belt Clip.
  • 3-Speed Selector Switch offers greater control over a wide range of fastening applications.
  • Impact mechanism produces 150 ft./lbs. of torque and up to 3,400 impacts per minute (IPM) for a variety of heavy duty applications.
  • Powerful motor allows for tightening or loosening various nuts and bolts.
  • Battery: Extreme weather performance to withstand frigid weather conditions.
Check Stock

Venzo Economical Bicycle Bike 1/4 Inch Driver Beam - Torque Wrench Allen Key Tools Socket Set Kit 1-10Nm - Great Maintenance Tool for MTB & Road Bike

  • ECONOMICAL: Economical and simple tools for anyone looking for torque referring to tighten bolts. Torque Range: 1-10Nm. Easy to use and read the torque..
  • PACKAGE: Comes with common bit to be used on bikes, including hex allen key 3/ 4/ 5/ 6mm. Torx T25. Phillips 2. Tighten the bolt clockwise only ( one way ).
  • PORTABLE: Very light but useful tool. Weight: 85g=0.18lbs. Length only 6 inch. Carry it in your handlebar or saddle bags. Share it with your riding mates whenever needed..
  • CARBON PARTS ESSENTIAL TOOL: Over-tightening bolts can cause expensive damages to your carbon parts. Applying torque not enough can lead to loose bolts and becomes dangerous while riding..
  • ORDER NOW, WORRY FREE! We're so confident about our product quality that we can provide a 2 years warranty !.
Check Stock

BOSCH GDS18V-740CB14 PROFACTOR 18V Connected 1/2 In. Impact Wrench with Friction Ring Kit with (1) CORE18V 8.0 Ah PROFACTOR Performance Battery , Blue

  • PROFACTOR performance – delivers high torque for breaking free stuck bolts and driving large fasteners quickly.
  • High-torque motor – delivers up to 740 Ft.-Lbs. of fastening torque and 1,180 Ft.-Lbs. of max breakaway torque.
  • Controlled power output – limit max torque and speed with three settings (0-800/1,300/1,750 rpm).
  • Advanced modes – offer preset and custom modes that help to prevent workpiece and fastener damage.
  • Auto Bolt Release – stops rotation when there is no load on the tool to prevent accidentally dropping bolts and nuts during removal.
Check Stock

226 Silicone O-Ring, 70A Durometer, Red, 2\ ID, 2-1/4\ OD, 1/8\ Width (Pack of 10)

  • ... low temperature capabilities, Bolt torque is reduced with no loss of tightening load. Bonded washers are used extensively for sealing under the heads of bolts in high pressure applications where coppers washers would be unsuitable. They are often used in hydraulic and pneumatic connections that are subject to extreme pressures..
  • WIDE APPLICATION: Oil pipeline system as a medium, for mechanical device, to prevent oil, fuel, water and gas leakage, etc. Great for high pressure fuel systems, brake caliper banjo bolt, brake master cylinder, fuel line bolts and water line bolts in turbos, automotive replacement drain plug gaskets, etc..
  • EASY TO USE PACKING: All O-rings are stored in a sturdy plastic box with labels, that avoids the trouble of sorting and selecting the size. Variety of thickness and size are all in one box, very convenient to use..
  • INTERNAL DIAMETER: Φ6(6mm), Φ8(8mm), Φ10(10mm), Φ12(12mm), Φ14(14mm), Φ16(16mm), Φ18(18mm), Φ20(20mm), Φ22(22mm), Φ24(24mm), Φ27(27mm), Φ30(30mm). 【Metric, Please See Picture 2 for Specific Dimensional Size】.
Check Stock

BOSCH GDS18V-221N 18V EC Brushless 1/2 In. Impact Wrench with Friction Ring and Thru-Hole (Bare Tool)

  • Impact wrench design – built to deliver high torque for tightening such fasteners as lag bolts, concrete anchors and lug nuts.
  • Powerful motor – delivers up to 221 Ft. -Lbs. of torque to drive large fasteners quickly.
  • Auto Bolt Release – stops rotation when there is no torque on tool to prevent accidentally dropping bolts and nuts during removal.
  • Delivers 221 Ft. -Lbs. of torque – ideal for fast tightening and removing of heavy-duty fasteners.
  • Compact tool design – weighs only 2. 77 Lbs. (tool only, not including battery) and has a 6. 4 In. head length.
Check Stock

Venzo 1/4 Inch Drive Click Torque Wrench Set Ð 2 to 22 Nm Ð Bicycle Maintenance Kit for Road & Mountain Bikes, Motorcycle Multitool - Includes Allen & Torx Sockets, 4mm 5mm Extension Bar & Storage

  • ESSENTIAL: Too much tightening will deform bike parts. Too little torque would mean the parts are loose. The bike torque wrench is a must have tool for installing bolts and bike part..
  • CALIBRATED BEFORE PACKING: We understand the accuracy of the torque is very important, especially for those expensive carbon parts. All the torque wrenches are pre-calibrated in the factory. Please read the instruction carefully to avoid any damage..
  • ACCURATE: It is the torque wrench with a preset lock ring. Unlike others the presetting could be changed when turning the handle, the torque wrench comes with a lock ring to freeze the preset value. 1/4'' Torque Fix Set,.
  • GREAT FOR BIKE: Torque range: 2-24 NM is just great for bike parts such as seat clamp, stem bolts, headset bolt and disc brake rotors etc. Included bits: Hex allen Keys 3 /4 / 5 / 6 / 8 / 10 mm, plus 5mm and 4mm Longer Allen Key for easy use, T20, T25 and T30 Torque Tolerance in: Accuracy +/- 4%..
  • ORDER NOW, WORRY FREE! We're so confident about our product quality that we can provide 2-year warranty! Made in Taiwan. Note: Stop turning when you feel a 'click'. 'Click' means the torque has reached preset value..
Check Stock

Venzo 1/4 Inch Drive Click Torque Wrench Set – 2 to 24 Nm – Bicycle Maintenance Kit for Road & Mountain Bikes, Motorcycle Multitool - Includes Allen & Torx Sockets, Extension Bar & Storage Box

  • ESSENTIAL: Too much tightening will deform bike parts. Too little torque would mean the parts are loose. The bike torque wrench is a must have tool for installing bolts and bike part. Comes with Guage perfect for bicycle carbon parts. 1/4'' Torque Fix Set. Torque range: 2-24 NM..
  • One of the MOST ACCURATE Mechanical Torque Wrenches : Allowing to preset up to 0. 2Nm, for example preset 5.4 Nm. And it is the torque wrench with a preset lock ring. Unlike others the presetting could be changed when turning the handle, the torque wrench comes with a lock ring to freeze the preset value. Tolerance in : Accuracy +/- 4%..
  • PACKAGE: Allen Keys 3 /4 / 5 / 6 / 8 / 10 mm, plus extender for easy use. T20, T25, T30 Torques. High quality. Great for bicycle parts or bolts. (Note: please do not try to use cheap quality tools, they will damage the parts)..
  • NOTE: Stop turning when you feel a "click". "Click" means the torque has reached the preset value.
  • ORDER NOW, WORRY FREE! We're so confident about our product quality that we can provide 2-year warranty! Made in Taiwan..
Check Stock

LIBRATON Bike Torque Wrench 1/4'', 5-25Nm, 0.1 Nm Micro, Torque Wrench, Drive Click Torque Wrench Set, Hex, Torx/Star Bit Sockets, Extension Bar, Bicycle Maintenance Kit, Professional Bicycle Tool

  • One Set for All Needs: Libraton bike torque wrench set includes 1/4'' Drive Torque Wrench, hex bit sockets (2, 2.5, 3, 4, 5, 6, 8,10mm), Torx/star bit sockets (T10, T20, T25, T30), 1/4'' extension bar and a storage box. A great set for your bicycle or motorcycle maintenance..
  • Quality Guarantee: The 1/4 torque wrench head is made of chromium-molybdenum alloy (Cr-Mo Steel), higher strength than chromium-vanadium steel (Cr-V steel). Aluminum-titanium alloy handle ensure a comfortable and anti-slip grip. Premium spring-loaded adjustment collar can be locked at the settled torque value automatically, which ensures stable working..
  • Accuracy Guarantee: Over-tightening or over-loosening torque highly causes bolts out of their job. Therefore a high-accuracy torque wrench is always needed. Our drive click torque wrench has a 5-25Nm working range with micro-adjustment to 0.1Nm, which helps you to set the expected torque value as needed. We also made tests on each of our bicycle torque wrenches to make sure pre-calibrated to an accuracy of ±3% (Normal torque wrenches only at ±4% )..
  • Easy to Use: Bicycle torque wrench is equipped with a quick adjustment mechanism making you change the torque value smoothly. And a "Click" sound can clearly tell pre-set torque value....
Check Stock