Top Extruder For Ender 3
UniTak3D Ender 3 Direct Drive Upgrade Kit Conversion Bracket Compatible with Creality Ender 3 V2,Ender 3 Pro and Voxelab Aquila 3D Printer Dual Gear Extruder&Bowden Extruder
- 【Application】:The direct drive upgrade kit is suitable for Ender 3 V2,Ender 3 Pro,Ender 3,Voxelab Aquila 3D printers,NOT compatible with Ender 3 Max,Ender 3 Neo,Ender 3 V2 Neo,NOT compatible with TITAN extruder..
- 【Outstanding Extrusion Control】:A direct drive extruder improves extrusion and retraction by removing the need for the Bowden (PTFE) tube. It provides precise retraction and a better print result..
- 【Stable Operation】:The holes of the Split Type conversion bracket are perfectly aligned, with supports on both sides to keep the center of gravity in the middle, and the structure is more stable..
- 【Flexible Filament Supported】: Compared with bowden extrusion,this direct drive extrusion greatly improves print quality of TPU and other flexible materials..
- 【Easy Installation】:No X,Y or Z-axis build volume lost. No firmware or wiring modification.Just tear down the original Ender 3 series plate and mount this direct drive upgrade kit..
Check StockCreality Upgrade Ender 3 Extruder Ender 3 V2 Upgrades Metal Extruder Aluminum MK8 Bowden Extruder 40 Teeth Drive Gear for Ender 3 Pro/Ender 5 Pro/Ender 5 Plus/CR-10 Series 3D Printer
- Compatibility: This Upgraded 3d printer accessories is an original upgraded replacement part for Ender 3, Ender 3 Pro, Ender 3 V2, Ender 3 Max, Ender....
- Last Over Years. Made by high quality aluminum, last much longer your stock plastic or 3D printed extruder feeder drive..
- Work Better. It makes loading the filament easier and smoother, no worries about filament scraping or breaking..
- Fits 1.75mm filament. 40 Teeth drive gear compatible with PLA/ABS/Wood/TPU/PTEG. Please Note: Some printer models like Ender 3 and Edner 3 Pro, their....
- Easy to Install. This extruder DIY kit comes with an instruction of how to put it together, which makes it more easy to install..
Check StockOfficial Upgraded Ender 3 v2 Ender 3 CR-10 All Metal Extruder Aluminum MK8 Bowden Extruder 40 Teeth Drive Gear for Creality Ender 3 Pro/Ender 5/ CR-10 Series 3D Printer
- The gray metal extruder is an original upgrade replacement part for Ender 3, Ender 3 Pro,Ender 5,CR-10, CR-10S, CR-10 S4, CR-10 S5, CR-10 Mini, CR-10S, CR-10 Plus..
- Works better than original plastic stock extruder, make loading filament much easier. Even smoother than the red metal extruder..
- Compatible with PLA/ABS/Wood/TPU/PTEG, 40 Teeth drive gear feeds the 1.75mm filament very smoothy..
- Easy to Install. The extruder diy kit comes with a instruction on how to put it together, which makes it more easy to install..
- 100% brand new and original Creality exturder. If you have any question, please feel free to contact us..
Check Stock3D Printer CNC Controller Ardiuno CNC kit with for ArduinoIDE,Longruner GRBL CNC Shield Board+RAMPS 1.4 Mechanical Switch Endstop DRV8825 A4988 Stepper Motor Driver Nema17 Stepper Motor LKB02,Black
- Compatible Models: This Extruder Motor kit is compatible with Creality 3D printers Ender 3/Ender 3 Pro/Ender 3 V2/Ender 3 Max/CR-10/CR-10S and etc..
- All-metal Extruder -- Stronger extrusion force with stable performance.
- metal extruder with high quality aluminum alloy has stronger extrusion force,....
- Smoothly and precisely -- The extrusion gear with high density is closely matched with U-shaped bearing. The even extrusion forces avoids the slippage....
- High Quality Stepping Motor: The high quality motor with low power, smooth speed, stable performance, low noise and no loss during operation, which....
- Low noise: stepper motor with low noise level and efficient heat dissipation has the large torque and high precision without losing step..
Check StockTPU Flexible Short Range Extruder with Eccentric Wheel Flexion Retrofit Extruder Kit for 3D Printers TPU Prints
- Compatible with Ender 3/Ender 3 V2/Ender 3 Pro 3D Printer. Supporting all 1.75mm diameter filament especially for flexible filament such as TPU, PLA and other flexible filaments..
- Easy to Install and Use - Switch Bowden extrusion to direct extruder at any time and easy to disassembly. It doesn't affect the inherent function of the printer because it's a complete extrusion kit. With longer Extruder motor connecting cable, tools, accessories, and wiring diagram instruction for installation, easy to assemble..
- Smooth Feed-in - Lower torque requirements on the stepper motor, reducing the possibility of the nozzle blockage when retracting filament and malfunction when loading new filament..
- Integrated All Metal Hotend - It's sturdy and wear-resistant with an all-metal shell and surface oxidation treatment.
- an Integrated structure is convenient for wiring and replacing..
- 3D Printer Direct Extruder Upgrade kit Easy Print TPU Flexible Filament.
Check StockCreality Original 3D Printer Extruder Assembled MK8 Hot End Sprinkler Kit for Ender 3 / Ender 3 Pro with Aluminum Heating Block, 1.75mm, 0.4mm Nozzle
- ENDER 3 EXTRUDER is 100% ORIGINAL CREALITY 3D PRINTINGE PRINTERS PARTS /ACCESSORIES AND WITH HIGH QUALITY, WE JUST CONFIRM IT WORKS WITH CREALITY ENDER 3 3D PRINTERS. OTHERS BRANDS WE DO NOT TEST IT..
- 5 PIECES 0.4MM 3D PRINTERS NOZZLES AS GIFT..
- ENDER 3 EXTRUDER HOT END CAN WORK WITH DIFFERENT SIZE MK8 NOZZLE: 0.2MM 0.3MM 0.4MM 0.5MM 0.6MM 0.8MM 1.0MM NOZZLE.
- MK8 EXTRUDER HOT END KITS,WHITE WIRE WAS TEMPERATURE THERMISTOR, BLACK WIRE WAS HEATING TUBE 24V 40W.
- TIP OF NOZZLE, ALUMINUM HEATING BLOCK, THROAT PIPE (BUILT-IN TEFLON).
Check StockCreality Direct Drive Extruder Upgrade Kit for Ender-3 / Ender-3 Pro, Full Assembled of MK8 Extruder, Hotend, 42-40 Stepper Motor, Fan, V-Slot Wheels Carriage, Cables
- Upgraded Kit - Direct extruder kit for Ender 3, Ender 3S, Ender 3 Pro. Support all 1.75mm diameter filament in the market, especially for flexible filament..
- Smooth Feed-in - The direct extrusion structure lower torque requirements on stepper motor, reducing the possibility of nozzle blockage when retracting filament..
- Greater Compatibility - Compared with bowden extruder system, more fit for printing with PLA, TPU and other flexible filaments..
- Strong & Sturdy - This direct extruder kit is all metal structure, durable and wear resistant..
- Easy Assemble - Longer connecting cable, tools, accessories and diagram instruction, easy to assemble..
Check StockZeberoxyz Upgrade Dual Gear Version Direct Drive Extruder Support Plate Easy Print Flexible Filament for Creality Ender 3 V2 Ender 3 Pro,Ender-3,CR-10,CR-10S 3D Printer Dual Gear Support Plate
- Material: Plate is made of high quality cold rolled sheet material,long service life, fine workmanship.
- Filament: More material options,easy to print TPU flexible filament.
- Advantages: A direct drive kit with dual gear extruder improves extrusion and retraction.
- Widely Used: for Creality Ender 3/ Ender 3 V2/ Ender-3 PRO/ CR10/ CR10S 3D Printers, Only Suitable for Dual Gear Version Pulley Extruder.
- Package Content: 1pcs Dual Gear direct extruder support plate, 1pcs Length 60cm motor extension cable (one end is female and the other is male), 2pcs....
Check Stock25PCS MK8 Ender 3 V2 Nozzles 0.4MM, 3D Printer Brass Hotend Nozzles with DIY Tools Storage Box for Creality Ender 3/Ender 3 Pro/Ender 3 Max/Ender 5 Pro, Ender 3 S1/Ender 3 Neo/CR 10 Series 3D Printer
- Premium Quality - 25 PCs high-quality brass nozzles, good abrasion resistance, heat resistance, and corrosion resistance.It is convenient for you to replace them in time to achieve high-quality printing..
- Package List - The 3D printer extruder nozzles come with 0.4 mm brass nozzles*25, nozzle cleaning needles*10, hexagon wrench*1, stainless steel tweezers*1, and a storage box..
- Strong Practicability - Storage box for easy carrying and storage of small accessories.The nozzle cleaning needle is made of high-quality stainless steel with good toughness and is not easy to break, and the nozzle can be cleaned from multiple angles.The hexagon wrench makes the adjustment of the nozzle easier..
- High Precision - Input diameter 1.75mm, smooth inner wall, extruder nozzle diameter error less than 0.02 mm.Greatly reduces the risk of print head leaks and avoids nozzle clogging..
- Wide Compatibility - Suitable for Creality Ender 3/Ender 3 Pro/Ender 3 V2/Ender 3 Max/Ender 5 Pro/Ender 3 S1/Ender 3 S1 Pro/Ender 3 Neo and CR 10 Series 3D printers.Compatible with all 1.75mm PLA ABS filament 3D prin....
Check StockCreality Ender 3 Direct Drive Upgrade Kit, Ender 3 Pro/Ender 3 V2 Direct Drive Extruder with 42-40 Stepper Motor, Hot End Kit, Fan and Cables, Support BL Touch
- Upgraded 3d printer extruder for Ender 3, Ender 3 Pro and Ender 3 V2 3D Printer. Customer Services: If you have any question or need technical support about the product, Please press "Ask a question" through our storefront's page, report an issue through the ”Your Orders“page. We will respond with 24 hours..
- Support all 1.75mm diameter filament in the market, offers more precise and smoother extrusion..
- Perfect for PLA and optimize the performance of remote printing with TPU and other flexible filaments..
- Comes with 42-40 stepper motor. This direct extruder kit is made of aluminum alloy and plastic, durable and wear resistant..
- With longer Extruder motor connecting cable, tools, accessories and wiring diagram instruction for installation, easy to assemble..
Check StockOfficial 3D Printer Extruder Upgraded Aluminum Drive Feed Extruders Accessories for 3D Printer 1.75mm Filament Works with Creality CR-10 Series Ender 5 Series Ender 3 Series
- ✔️Durable Material -- High quality aluminum alloy material and sandblast to surface oxidization, ensuring this red extruder is last for long term....
- ✔️New Upgraded Design -- The upgraded red extruder has removed pneumatic joint so as to increase gear density, preventing the joint fracture....
- ✔️Improved Performance -- The optimized extruder with metal extrusion and original hot-end kit pushes the filament into printer nozzle, greatly....
- ✔️Install Easily -- You just remove the old Creality extruder & screw and then install the new red extruder. All the necessary accessories are....
- ✔️Wide Compatibility -- Red extruder is suitable for Creality 3d printers accessories: Ender-3 series, Ender-5 series, CR-10S, CR-10, CR-10mini,....
Check StockCreality Sprite Direct Drive Extruder Kit for Creality Ender 3/Ender 3 V2/Ender 3 Pro/Ender 3 S1/Ender 3 Max/CR-10 Smart Pro 3D Printers
- Compatible: Creality Sprite direct drive extruder upgrade kit compatible with Ender 3, Ender3v2, Ender 3 pro and Ender 3 Max..
- Double gear feeding, stable and reliable: The double tooth structure makes the feeding is more reliable and stable. Reduces the chance of clogged nozzles when retracting consumables and failures when loading new consumables. Full metal hot end kit with heating block, titanium throat and cooling block, allowing you to print high temperature materials up to 300°C.
- Large Torque, Extrusion Force Up to 80N - The use of gear with 3.5:1 gear ratio which perfectly matches with motor makes extrusion force up to 80N (depending on filaments). More precise control of feeding withdrawal..
- Support Printing Flexible and High Temperature Filament : With direct drive extruder and up to 300°C all metal hotend kit, the Spirit direct drive extruder upgrade kit supports 1.75 MM filaments, including PLA, TPU, PETG, ABS, PA, PC etc..
- After-sales Service: Life-time professional technical supports, If you encounter unsolvable problems during installation and use, please f....
Check Stock