Top Extruder Parts

TERMATH Fondant Extruder with 20 Discs Sugar Paste Extruder,Clay Extruder Cake Decor Tool Set

  • This fondant extruder is made by alloy,light weight, easy to carry and use..
  • It comes with 20 different stainless steel discs,can create various ribbon to meet all your needs in art project..
  • The extruder can be disassembled into three parts for easy clean with soap and water..
  • The size as the picture shown.Please check the size of the product on the picture..
  • If you are unsatisfied for any reasons, please contact us within 30 days, we will give you a satisied sollution..
Check Stock

CZWESTC Fondant Extruder with 20 Discs Sugar Paste Extruder,Clay Extruder Cake Decor Tool Set

  • This fondant extruder is made by alloy,light weight, easy to carry and use..
  • It comes with 20 different stainless steel discs,can create various ribbon to meet all your needs in art project..
  • The extruder can be disassembled into three parts for easy clean with soap and water..
  • The size as the picture shown.Please check the size of the product on the picture..
  • If you are unsatisfied for any reasons, please contact us within 30 days, we will give you a satisied sollution..
Check Stock

Creality Upgrade Ender 3 Hotend, Assembled Extruder with Capricorn Bowden PTFE Tubing for Creality Ender 3 Pro/Ender 3 V2 with Silicone Cover×3, 0.4mm Ender 3 Nozzle×3 and 2 Pair Pneumatic Couplers

  • It's 100% Creality Original Upgrade Assembled Extruder Hotend..
  • Original Capricorn XS Serious Bowden PTFE tubing with lowest friction on the market. Less friction means more responsiveness, less retraction, more accurate prints, less slippage, wear, and tear on the extruder, and less clogging when printing chunky filaments such as some woodfills or ironfills..
  • Pluggable: the heating tube and temperature thermistor that from control box, connect them with terminal housing and pin. Then you could plug the hotend kit, easier to replace hotend kit..
  • With more terminal housing and pins as spare parts, in case fail installation and waste..
  • MK8 Extruder Hot End kit, white wire was temperature thermistor, braided wire was heating tube 24V40W..
Check Stock

Creality Official Ender 3 Extruder Upgraded and 1M Capricorn Bowden PTFE Tubing 1.75mm 3D Printer Accessories Kit with Bed-Level Spring & Tube Cutter, 4 in 1 Package for Ender-3 Series CR-10 Series

  • ✔️【Quality Assurance】Creality 100% official aluminum extruder is lightweight and strong, ensuring a more even feed rate over time as well as resisting wear. Removed pneumatic joint so as to increase gear density, it makes loading the filament easier and smoother. Our extruder kits have an adjustable bolt so that you can adjust the pressure of the extruder gear as needed..
  • ✔️【Original Capricorn PTFE Tube】Capricorn PTFE is well regarded as the highest quality PTFE tubing in all 3D printing. The tight tolerances make sure that the filament is lead directly to the hotend with as little room for error as possible between the extruder and the hot end..
  • ✔️【Great Value Spare Parts】4pcs Upgraded bed-level springs are made of high-quality spring steel, fatigue and heat-resistant, durable for use. They will allow you to print at a higher speed without worrying about any wobble. One PTFE cutter with an extra sharp razor is also included to ensure that the tube is cut flat on both sides..
  • ✔️【Easy To Install】DIY kit and you need to assemble by yourself. The full installation kit for the extruder is include....
Check Stock

Haldis 3D Dual Drive Gear Extruder for 3D Printer MK8 V6 CR10 1.75mm TPU/TPE Flexible Filament Without Motor (DDB Left)

  • 1.【Transparent Design】: Transparent and cool design, double gear extruder, when working, you can watch the printing filament go through to see how it works. The transparent case is very practical and looks beautiful..
  • 2.【Dual Gear Extrusion】: Two stainless steel wheels grab the filament from both sides, high extrusion force, ensure smooth feeding and provide fast retraction, after a lot of trial and error improvements, we successfully improved the gear bite problem, improved The durability and reliability of the gears reduce the consumption of our gears and extend their service life..
  • 3.【Adjustable Pressure Spring】: Easily adjust the clamping force of the filament, improved adjustment thumb screw, more comfortable adjustment and more convenient to use..
  • 4.【High Quality Material】: Transparent hard plastic shell and high quality metal extrusion wheel parts, the transparent material looks very beautiful and beautiful. Lightweight: only 70 grams. It reduces the stress on the printer and is extremely easy to assemble..
  • 5.【Widely Compatible】: Compatible with most DIY ....
Check Stock

Upgrade 3D Printer Accessories with All Metal Extruder Feeder, Capricorn Bowden Tubing, Pneumatic Couplers, Bed-Level Springs for Creality Ender 3/Ender 3 Pro/Ender 5 Pro/Ender 5 Plus Ender 3 Upgrades

  • 3D Printer Extruder – Instantly provide improved print quality and reduce filament slipping by firmly grasping the filament between two threaded wheels locked together. No more skipped steps when extruding at high speeds or after retractions. Print faster with this superior design, which is able to feed much more filament into the hotend in the same period of time than stock plastic extruders..
  • 100% Original Capricorn XS Bowden Tube for 1.75mm filament – Capricorn ptfe tube is regarded as the highest quality PTFE tubing in all of 3D printing. The tight tolerances make sure that the filament is lead directly to the hotend with as little room for error as possible between the extruder and the hotend. It is rated for withstanding the highest temperature in the market which is perfect for printing filaments such as PLA, PETG, ABS, Nylon. Fits for 1.75mm 3d printer Filament..
  • Creality Die Springs – Those springs are extra firm and help to hold the bed level for longer while being more resistant against wearing out and loosing compression. Level the bed once and it should hold for more prints with these high performance stiff springs. PC4-M6 & PC4-M10 pneumatic fittings are also included for replacement use on any stock creality hotends..
Check Stock

Redrex Ender 3 All Metal Bowden Extruder Tension Adjustable with Tube and Stiff Bed-Leveling Springs for Ender 3,Ender 5,CR10 Series 3D Printers

  • All Metal Extruder Replacement for Ender 3 Ender 5 CR10 Series:This durable aluminum extruder frame works more stable than plastic parts..
  • Adjustable Extrusion Spring Tension Design: The extrusion spring tension could be adjusted by tighten the screw..
  • Upgraded Stiff Bed Leveling Springs:It provides stronger tension and longer sevice life than the stock ones..
  • High Quality Bowden Tube :It was made of highly purified PTFE(Poly Tetra Fluoro Ethylene) material,it feeds the filament smoothly..
  • Recommend filament materials:PLA/ABS/Wood/Hips/Flexible/PTEG,40 Teeth drive gear feeds the 1.75mm filament very smoothy..
Check Stock

Official Creality 3D Extruder Feeder Drive MK-8 Aluminum Upgraded 1.75mm for CR-10 Ender 3 CR-10S (Black)

  • 【Upgrade Black Extruder】All Metal MK-8 Extruder Feeder Drive 1.75mm Filament. It makes loading the filament easier and smoother, with no worries about filament scraping or breaking. This extruder feeder drive is compatible with nearly all models of 3D printers. No need to change stepper motors or other mounting hardware..
  • 【Wide Application】The upgrade Creality3D silver metal Bowden extruder is compatible with nearly all models of 3D printers(Ender 3/3 Pro, Ender 3 V2, Ender 3 Max, Ender 5/5 Plus/5 Pro, CR-10, CR-10 V2, CR-10 Max, CR-10 S4, CR-10 S5, CR-10S, CR-10 Plus, CR-X, CR 20/20 Pro). No need to change stepper motors or other mounting hardware..
  • 【Very Easy to Install】 Unbolt the old original Creality plastic extruder & screw in the new Metal Extruder and ready to start printing. Our metal extruder kit comes with an instruction on how to put it together, which makes it easier to install. Used for 1.75mm filament of 3D printer MK8 Bowden extruder frame.
  • 【Durable】 All-metal aluminum alloy, DIY aluminum block and you need to be assembled by yourself. Giving a much smoother travel and print quality. Fits a 1.75mm filament..
  • 【Official Creality Original Quality】This high-quality all-aluminum construction is guaranteed to last for years,....
Check Stock

Bowden Extruder V2.1 RNC Nano Coated Gear DDB Universal Geared Extruder for 3D Printer

  • Kit includes: 1pc Universal Geared Extruder w/ RNC Nano Coated Gear, 1pc Screws package, 1pc Installation tools package, 1pc Stepper motor mounting bracket.
  • Upgraded High performance extruder for 3D Printer.
  • Upgrade Highlights: 1. The position of the gears and the accuracy of all screw holes are calibrated. 2. Modified the new buckle, both sides of the V2.1 version of the DDB extruder support filament running thru in and out (it has no specified direction, and you are able to use either side of the material ports).
  • 3. The filament has an independent motion cabin inside the extruder. The new white filament guide inside the extruder is helping the filament running smoothly. 4. The new outer shell design with edge cut on the top of the extruder is reserved for the screw rod of Ender 3 printer. 5. Upgraded shell using new mixed materials.
  • ***Please make sure Gears are Installed and Precisely Aligned before printing, they will perform successfully.
Check Stock

Official 3D Printer Extruder Upgraded Aluminum Drive Feed Extruders Accessories for 3D Printer 1.75mm Filament Works with Creality CR-10 Series Ender 5 Series Ender 3 Series

  • ✔️Durable Material -- High quality aluminum alloy material and sandblast to surface oxidization, ensuring this red extruder is last for long term....
  • ✔️New Upgraded Design -- The upgraded red extruder has removed pneumatic joint so as to increase gear density, preventing the joint fracture....
  • ✔️Improved Performance -- The optimized extruder with metal extrusion and original hot-end kit pushes the filament into printer nozzle, greatly....
  • ✔️Install Easily -- You just remove the old Creality extruder & screw and then install the new red extruder. All the necessary accessories are....
  • ✔️Wide Compatibility -- Red extruder is suitable for Creality 3d printers accessories: Ender-3 series, Ender-5 series, CR-10S, CR-10, CR-10mini,....
Check Stock

HICTOP All Metal Extruder Upgraded Replacement Aluminum MK8 Extruder Drive Feed for Creality 3D Printer Ender 3/3Pro CR-10, CR-10S, CR-10 S4, and CR-10 S5

  • [UPGRADING]: Original Aluminum Drive Feed for Creality Ender 3/3Pro CR-10, CR-10 S4, CR-10 S5, it is stable and durable..
  • [REPLACEMENT]: MK8 extruder drive feed kit, can replace acrylic parts of Creality Ender 3/3Pro CR-10, CR-10 S4, CR-10 S5..
  • [Easy TO USE]:for 1.75mm filament of 3D printer MK8 bowden extruder frame.
  • [EASY OPERATION]: DIY kit and you need to assemble by yourself..
  • [SERVICE COMMITMENTS]: We offer 1 YEAR Money Back Warranty. If you unsatisfied with the quality of our product, you can contact us with your complaints and 100% get your money back..
Check Stock

Extruder Wheel 3D Printer Parts Drive 40 Teeth Gear Brass Extruder Wheel Gear Compatible with CR-10 CR-10S S4 S5 Ender 3 Ender 3 Pro 10

  • Sufficient content: this package contains adequate quantity of extruder wheels in a pack, sufficient quantity to satisfy your various demands and....
  • Check the dimension: each 40 teeth gear measures approx. 11 x 11 mm/ 0.43 x 0.43 inch in length and width, its inner diameter is approx. 5 mm/ 0.2....
  • Practical function: our 3D printer parts can replace your broken one and make your printer work more efficiently, improve the performance and....
  • Good bearing capacity: these drive 40 teeth gears are made of quality brass, rustproof and no corrosion, durable and stable to use, with good bearing....
  • Wide compatibility: our brass extruder wheel gears are easy to install, compatible with CR-10, CR-10S, S4, S5, Ender 3, Ender 3 Pro and most 3D....
Check Stock