Top Fan Header Controller

Cable Matters 2-Pack 3 Way 4 Pin PWM Fan Splitter Cable - 12 Inches

  • 4 pin fan splitter cable connects 3 computer case fans to a single motherboard fan header.
  • PWM splitter cable connects an additional fan to increase airflow in your computer case.
  • Fan speed label on the 4 pin fan master connector of the fan header splitter is wired to receive the PWM control signal and share it to the slave fans.
  • PC fan splitter connects to the 4-Pin header on the motherboard and splits the signal to 3 PWM fans.
  • PWM fans can spin at the same speed using software from a motherboard equipped with PWM control.
  • CPU fan splitter has a 4 pin fan connector a wire that sends the RPM signal to the motherboard connector for synchronizing the fan speed with the other 2 fans.
  • 3 pin fan connector omits the RPM signal pin for tandem fan speeds with all 3 fans when supported by your computer and fans.
  • Cost-effective 2-pack of computer fan splitter cables provides a spare cable for a adding a fan to increase cooling in your computer.
  • Sleeved and wrapped black 12-inch case fan splitter cable provides a tidy look in an open computer case.
  • 3-pin & 4-pin fan compatible with computer case fans such as the Cooler Master Hyper 212 EVO 120mm, a 200mm case fan such as the Cooler Master MegaFlow 200mm, and 230mm case fans.
  • Add more cooling to your computer with t....
Check Stock

Airgoo PWM ARGB Fan Hub, 8 Fan Ports with pwm Temperature Control sync with Motherboard, 8 Addressable RGB LED Ports for 5V 3-pin Aura SYNC, Gigabyte RGB Fusion, MSI Mystic Light Sync, Sata Powered

  • 【8 Channels Fan Hub】Powering up to 8 Fans (3-pin Non-PWM or 4-pin PWM), Occupying only One 4-pin Motherboard Fan Header, sync with Motherboard Fan Header, 8 channels support(F-1~F-8) and only 1 channel RPM detect support(F-1). Sata Powered, support connect more high performance fans, extended your motherboard fan headers. And Airgoo ARGB Fan Hub built-in fuses, keep your system safe..
  • 【PWM Temperature Control】Fan speed can be automatically adjusted by motherboard BIOS pwm temperature function. If 3-pin non-PWM fans are connected to this fan hub, this fan hub CANNOT give them extra PWM function. They will run at FULL SPEED. If 4-pin PWM fans are connected to this fan hub, DUTY RATIO of all PWM fans can be adjusted at the same time. That is, all PWM fans will run at the same DUTY RATIO. Only speed of Fan 1(F-1) can be identified by the system..
  • 【8 Channels ARGB Hub】8 channels argb hub, connect any 5V 3-pin (+5V, DATA, N/A, GND) addressable rgb fans or addressable rgb led strips you wish to control, just plug this ARGB Fan Hub into motherboard argb header via included extension cable, sync with motherboard 5V 3-pin ARGB headers. Sata Powered, support connect more argb lightings, extended your motherboard argb headers. And Airgoo ARGB Fan Hub b....
Check Stock

Airgoo PWM ARGB Fan Hub, 2022 New Upgrade 8 Fan Ports with pwm control sync with motherboard, 8 Addressable RGB LED Ports for 5V 3-pin Aura SYNC, Gigabyte RGB Fusion, MSI Mystic Light Sync, Sata Power

  • 【8 Channels Fan Hub】Powering up to 8 Fans (3-pin Non-PWM or 4-pin PWM), Occupying only One 4-pin Motherboard Fan Header, sync with Motherboard Fan Header, 8 channels support(F-1~F-8) and only 1 channel RPM detect support(F-1). Sata Powered, support connect more high performance fans, extended your motherboard fan headers. And Airgoo ARGB Fan Hub built-in fuses, keep your system safe..
  • 【PWM Temperature Control】Fan speed can be automatically adjusted by motherboard BIOS pwm temperature function. If 3-pin non-PWM fans are connected to this fan hub, this fan hub CANNOT give them extra PWM function. They will run at FULL SPEED. If 4-pin PWM fans are connected to this fan hub, DUTY RATIO of all PWM fans can be adjusted at the same time. That is, all PWM fans will run at the same DUTY RATIO. Only speed of Fan 1(F-1) can be identified by the system..
  • 【8 Channels ARGB Hub】8 channels argb hub, connect any 5V 3-pin (+5V, DATA, N/A, GND) addressable rgb fans or addressable rgb led strips you wish to control, just plug this ARGB Fan Hub into motherboard argb header via included extension cable, sync with motherboard 5V 3-pin ARGB headers. Sata Powered, support connect more argb lightings, extended your motherboard argb headers. And Airgoo ARGB Fan Hub b....
Check Stock

EK AIO 240mm, D-RGB All-in-One CPU Cooler with EK-Vardar High-Performance PMW Fans, Water Cooling Computer Parts, 120mm Fan, Intel 115X/1200/2066, AMD AM4

  • ...compatibility with almost all modern case designs. Socket Compatibility includes: Intel 1150, 1151, 1155, 1156, 1200, 2011, 2011-3, 2066 and AMD AM4.
  • FULLY CUSTOMIZABLE D-RGB LIGHTING - The EK AIO features fully addressable D-RGB lighting, easily customized to match your set-up via your motherboard or standalone RGB controller. The CPU block features an acrylic light diffuser, giving both a dynamic colour display and smooth lighting transitions for a premium D-RGB display. System Requirements: - 4-Pin PWM Header for pump and fan operation - 3-Pin Addressable 5V D-RGB header.
  • ULTRA QUIET D-RGB FANS - The EK-Vardar S included with the EK AIO are industrial grade high-static PWM fans, designed and built primarily for high-performance liquid cooling systems. Controlled by either your motherboard or standalone fan controller, the EK Vardar can be adjusted to run at speeds between 550 - 2200RPM for either high airflow or silent running. Each Vardar fan has fully integrated and customizable D-RGB lighting..
  • PREMIUM AND DURABLE DESIGN - The EK AIO comes pre-installed with reinforced and sleeved rubber tubing, each fitted with an aluminum cover to ensure they’re ultra-durable. Its diamond-cut rotary fittings allow for easy installation and adjustment of the ru....
Check Stock

Cooler Master 1-to-5 ARGB Splitter Cable / 5V - Support 3-pin Addressable RGB - LED Sync Cable for MasterFan/MasterLiquid ARGB Series Support(ARGB 1-to-5 Splitter)

  • Cooler Master 1-to-5 ARGB Splitter Cable,NOT support 12V RGB, Only support 5V RGB.
  • Support 3-pin Addressable RGB - LED Sync Cable for MasterFan/MasterLiquid ARGB Series Support.
  • 3-pin ARGB Header compatibility,2ft/60cm Long and flexible material makes it easy for cable routing. Keep it effortless and hassle free..
  • NOTE: 1. (DO NOT connect an Addressable RGB(ARGB/Digital RGB +5V) Fan to a Non-Addressable RGB(Standard +12V) motherboard header or RGB controller. 2. Beyond the look, Cooler Master provides quality. With high quality material, keep your build reliable and flawless. Certified Compatible with Asus Aura, ASRock RGB, Gigabyte Fusion, MSI RGB..
  • Splitter: - Connection Type: Straight Through Wiring (Passive Wiring) - Connector A: 3-pin RGB LED Connector Female - Connector B: 3-pin RGB LED Connector Male.
Check Stock

PWM Fan Splitter Cable 2 Pack, PC 4 Pin Fan Power Extension Cable 1 to 3 Fan Splitter Converter [Sleeved Braided] for Computer ATX Case 4-Pin/3-Pin Cooling Fan Cable - 12 Inches

  • 【1 to 3 Fan Splitter Cable】4 Pin fan splitter cable connects 3 computer case fans to a single motherboard fan header.
  • PWM splitter cable connects an additional fan to increase airflow in your computer case.
  • Fan speed label on the 4 pin fan master connector of the fan header splitter is wired to receive the PWM control signal and share it to the slave fans..
  • 【Easy to use】The Fan Splitter Connects 3 Computer Case Fans to a Single Motherboard Fan Header, Compatible With 4 Pin and 3 Pin PMW Fan Connector.
  • 【Steady and Durable】Black sleeved nylon braided cable, more durable and make the inside of pc case looks more clean & tidy..
  • 【Broad Compatibility】3-pin & 4-pin fan compatible with computer case fans such as the Cooler Master Hyper 212 EVO 120mm, a 200mm case fan such as the Cooler Master MegaFlow 200mm, and 230mm case fans.
  • Add more cooling to your computer with this PWM fan splitter cable..
  • 【Lifetime Warranty】Originated from confidence in product quality, we provide unconditional lifetime warranty ensures long-time satisfaction of your purchase and provide 24-hour service online..
Check Stock

Thermaltake 9 Port LED Hub Sync Controller - Black

  • Manufactured with a stable SATA power input in mind, TT Sync Controller safely and reliably powers up to 9 addressable LED products..
  • TT Sync Controller supports motherboards that have Aura Addressable Header (ASUS), Digital Pin Header (GIGABYTE) or JRAINBOW (MSI).
  • 3 PWM signal cables and 2 mainboard signal bridge cables are included in the pack..
Check Stock

Cooler Master ARGB LED Controller with 4 x 3-Pin Ports - Multiple Colour Effects, Thermal Detection Mode, 4-Pin RGB Device Compatible

  • VERSATILE SYSTEM HUB - Can connect to either 4-Pin RGB or 3-Pin ARGB compatible motherboards (ASUS Aura Sync, Gigabyte RGB Fusion, MSI Mystic Light or ASRock Polychrome) or function as an independent controller instead..
  • SPECTACULAR LIGHTING EFFECTS - Features include interchangeable RGB/ARGB lighting control, multiple LED modes, as well as colour and speed adjustments..
  • BROAD COMPATIBILITY - The Cooler Master ARGB Controller includes a fan-signal wire, case-restart wire, motherboard restart wired, 4-Pin RGB connector, 4-Pin motherboard connector, USB header connector, USB adapter, ARGB 3-Pin motherboard connector, thermal detection wire, and 4 ARGB 3-pin connectors.
  • THERMAL DETECTION FUNCTION - When connected via the thermal detection cable, real-time temperatures can be monitored and displayed through colour lighting effects..
  • IN-FRAME MAGNETS - The slim case can be attached to any metallic surface..
Check Stock

Waveshare Mini Base Board (A) Designed for Raspberry Pi Compute Module 4 Suitable for Evaluating The Raspberry Pi CM4 Or Being Integrated Into End Products

  • Mini base board designed for Raspberry Pi Compute Module 4, suitable for evaluating the raspberry pi CM4 or being integrated into end products.
  • Compared with version B, there're NO RTC, Fan controller, and battery holder on version A, which is more cost effective.
  • Standard Raspberry Pi CM4 socket and color-coded Raspberry Pi 40PIN GPIO header, suitable for Compute Module 4 Lite/EMMC series module.
  • Onboard multiple connectors including: CSI/DSI/FAN/HDMI/USB/RJ45 Gigabit Ethernet/Micro SD Card Slot/M.2 Slot.
  • Comes with mounting screw, easy to install. When using the M.2 interface, please use the matching screws..
Check Stock

Gavemi Fan Splitter, PWM 4 Pin PC Case Fan Splitter Adapter Cable Compatible 3 Pin Fan, 12.6 inches

  • Fan splitter cable is compatible with all brands of 4-pin PWM fans and 3-pin fans..
  • It is possible to run three chassis fans at the same time on a single PWM fan header and control the speed..
  • 4 pin fan splitter is a black cable sleeve to make the inside of the case more concise..
  • ength 12.6 inches, 24 AWG pure copper conductor. Pack of two case fan splitter cables..
  • PC fan splitter has a 4-pin male fan connector connected to the motherboard, and the fan header splitter at the other end has three 4-pin female connectors connected to the PWM case fans..
Check Stock

StarTech.com USB 3.1 PCIE Card - 5 Port - 1x USB-C - 2x USB-A - 1x 2 Port IDC - Internal USB Header Expansion - USB C PCIe Card (PEXUSB312EIC)

  • Add an external USB Type-C and two external USB Type-A ports to your computer, plus an IDC header port that can provide two internal USB 3.0 ports.
  • 5 Port USB 3.1 PCIe Card with 1x USB-C 2x USB-A + 1x 2 Port IDC (5Gbps).
  • Easily add a range of USB port types to your computer with this USB 3.1 Card to connect a variety of modern and legacy USB devices, both inside and outside your computer.
  • Perfect for PC upgrades or builds, it works with both USB-A and USB-C devices, and also supports older USB 3.0 and 2.0 devices / USB-C card / USB C PCIe card / USB C controller / USB Type C PCIe card / USB 3.1 controller / USB 3.1 mother board header / Internal USB header expansion / PCIe USB Host Controller / USB Type-C Host Card /PCI Express USB 3.1 Card / USB Type-C Port Adapter.
Check Stock

Gigabyte GA-970A-DS3 AM3+ AMD 970 SATA 6Gb/s USB 3.0 ATX AMD Motherboard

  • ...SATA 6Gb/s devices. Support for RAID 0, RAID 1, RAID 5, RAID 10, and JBOD..
  • USB: South Bridge: Up to 12 USB 2.0/1.1 ports. Etron EJ168 chip: Up to 2 USB 3.0/2.0 ports on the back panel.
  • Internal I/O Connectors: 1 x 24-pin ATX main power connector/1 x 4-pin ATX 12V power connector/6 x SATA 6Gb/s connectors/1 x CPU fan header/2 x system fan headers/1 x power fan header/1 x front panel header/1 x front panel audio header/1 x S/PDIF Out header/3 x USB 2.0/1.1 headers/1 x Clear CMOS jumper.
  • Back Panel Connectors: 1 x PS/2 keyboard/mouse port. 6 x USB 2.0/1.1 ports. 2 x USB 3.0/2.0 ports. 1 x RJ-45 port. 3 x audio jacks.
Check Stock