Top Fantech Db 10
Rockville RPG2X10 Bluetooth PA System Mixer/Amp+10\ Speakers+Stands+Mics+Bags
- ...z magnets provide incredibly deep bass and acoustic power. 200 Watts RMS / 400 Watts Program Power / 800 Watts Peak. State-of-the-art 1.75 crystal piezo compression horn tweeter. Two way cabinet architecture. Horizontal / Vertical position stage monitor. Pole mountable. Frequency range: 65Hz - 20KHz. Sensitivity: 92dB. Maximum SPL: (110 Watts) 109dB..
- Transducer compliment: 10 woofer premium high frequency driver with an exponential horn. Input connections: Two 1/4 jacks in parallel. Enclosure materials and finish: Trapezoidal, black carpet covered enclosure and a full length black. powder-coated steel grill. Dimensions (W x D x H): 15.35" x 11.81" x 20.28". Mixer: LCD Display. USB / SD Input. MP3 Playback. Built-In FM Radio Tuner. Bluetooth connectivity. 200 Watts RMS / 400 Watts Program Power / 800 Watts Peak @ 4 ohms..
- 4 balanced XLR microphone inputs. Tape/CD Line inputs. 10 total inputs. Master volume control. Bass, treble controls, and level controls on each channel. Reverb effect level control on each channel. Digital delay effect with independent level control. Line Out for connection to external amplifiers. Return input for connection of external effects processors. Record Out for taping. RF interference protection on all inputs. Aux Send Outp....
Check StockSound Equalizer by Swank
- The CT-7EQ is a 7 band 1/2 din parametric car audio equalizer designed to divide and enhance the segment of frequency for your car audio application.
- Car audio equalizer featuring 7 bands that divide 20Hz - 20kHz into 7 segments.
- Parametric Equalizer : 50Hz, 125Hz, 315Hz, 750Hz, 2.2KHz, 12KHz.
- Included with the car equalizer are installation brackets and hardware.
Check StockSennheiser HD 400S - Over-Ear Headphone with Smart Remote, Black
- Impedance 18 Ω Frequency response (Microphone) 100 – 10,000 Hz (-10 dB) Frequency response (Headphones) 18–20,000 Hz (-10 dB).
- Sound pressure level (SPL) 120dB (1kHz/1Vrms) THD, total harmonic distortion 003c0.5% (1kHz/100dB) Ear coupling Over-Ear.
- Jack plug 3.5mm angled Cable length 1.4m Transducer principle Dynamic.
- Weight 217g Pick-up pattern Omni directional Microphone sensitivity 44dbV/Pa.
- Acoustics Closed Sensitivity 120 dB SPL @ 1 kHz, 1V RMS.
Check StockCT Sounds CT-7EQ 7 Band 1/2 Din Parametric Car Audio Equalizer
- The CT-7EQ is a 7 band 1/2 din parametric car audio equalizer designed to divide and enhance the segment of frequency for your car audio application.
- Car audio equalizer featuring 7 bands that divide 20Hz - 20kHz into 7 segments.
- Parametric Equalizer : 50Hz, 125Hz, 315Hz, 750Hz, 2.2KHz, 12KHz.
- Included with the car equalizer are installation brackets and hardware.
Check StockRockville CAR-EQ-Oke Car Audio 7 Band Equalizer w Bluetooth + Mic Input Karaoke
- Features: Rockville CAR-EQ-OKE 1/2 Din 7 Band Car Audio Equalizer EQ w/ Microphone Input, Echo and Bluetooth, Bluetooth audio streaming from any smartphone or other Bluetooth-enabled device.
- 7 adjustable bands of equalization (50Hz, 125Hz, 315Hz, 750Hz, 2. 2KHz, 6KHz and 12KHz), Each band is adjustable from -12dB to +12dB, Built in crossover, Subwoofer level controls.
- Includes mounting brackets and screws for easy installation, Amazing quality with low distortion (Built with top quality components), Frequency response: 20Hz TO 20KHz +/- 1dB, S/N Ratio: 95 dB, Crossover Roll-Off: 12dB per octave.
- Input impedance: 10K, Input sensitivity: 200mv per channel >7V, THD: 0. 01%, Input: 12V, Output: 12V, Power requirement: 11-16V DC, Unit dimensions in inches: 7. 08 x 5. 51 1. 26.
- 7. 315 Hz control (+ or = 12 dB), 8. 750 Hz control (+ or = 12 dB), 9. 2. 2 KHz control (+ or = 12 dB), 10. 6 KHz control (+ or = 12 dB), 11. 12 KHz control (+ or = 12 dB), 12. Microphone volume control, 13. Microphone echo control.
Check StockJBL VMA1120 Commercial/Restaurant 70v Bluetooth Mixer/Amplifier+6 Wall Speakers
- ...puts. Per-Channel Bass and Treble Controls. Voice-Activated Ducking.
- Front-Panel Display and Controls. Configurable Output Routing. Includes Rack Mount Kit. Specifications: Output Power Per Channel: 120 Watts into 4 Ohms or 8 Ohms. Insertion Loss: 70 V and 100 V Outputs: 1 dB Max. Input Channels: 5. Output Channels: 1. Tone Control: Bass and Treble non-detented potentiometers on each channel Bass: 14 dB @ 50 Hz Treble: 14 dB @ 10 kHz. Bass: 14 dB @ 50 Hz. Treble: 14 dB @ 10 kHz.
- Input Sensitivity: Mic Input: 5.5 mVrms Line Input: 1.3 Vrms RCA Input (Stereo In): 130 mVrms. Mic Input: 5.5 mVrms. Line Input: 1.3 Vrms. RCA Input (Stereo In): 130 mVrms. Frequency Response: Measured at 2.83 Vrms into rated load impedance at any output 4/8 Ohms Output: 20 Hz to 20 kHz, 2 dB 70 V/100 V Outputs: 80 Hz to 15 kHz 3 dB. 4/8 Ohms Output: 20 Hz to 20 kHz, 2 dB. 70 V/100 V Outputs: 80 Hz to 15 kHz 3 dB. Total Harmonic Distortion (THD): Power Amp Output:.
- Signal to Noise Ratio: >76 dB. Input Impedance: Mic: 400 Ohms Line: 20k Ohms RCA: 50k Ohms. Mic: 400 Ohms. Line: 20k Ohms. RCA: 50k Ohms. Phantom Power: 27 VDC. Crosstalk: -70 dB. Nomi....
Check StockMemphis Audio VIV900.5 75W x 4 + 500W x 1 Car Amplifier
- Features: 5-channel car amplifier, 50 watts RMS x 4 + 300 watts RMS x 1 at 4 ohms / 100 watts RMS x 4 + 500 watts RMS x 1 at 2 ohms / 150 watts RMS x 2 bridged at 4 ohms + 500 watts RMS x 1 at 2 ohms, Class D amp technology.
- Tuning Controls: front channels: Variable high- or low pass filter (10-5,000 Hz, 24 dB/octave).
- Rear channels: Variable high-pass filter (10-500 Hz, 24 dB/octave) / Variable low-pass filter (50-5,000 Hz, 24 dB/octave) / Bandpass filter engages both.
- Subwoofer channel: Variable subsonic filter (10-80 Hz, 24 dB/octave) / Variable low-pass filter (50-500 Hz, 24 dB/octave) / Variable bass boost (0-18 dB at 45 Hz).
- Other Features: Optional wireless remote subwoofer level control available, Preamp inputs, Speaker-level inputs (require speaker wire to RCA adapters), Hinged magnetic cover plate conceals top-mounted controls, 7 color selectable LED logo, 4-gauge power and ground leads and a 80-amp fuse recommended — wiring and hardware not included with amplifier, No onboard fuses — when installing multiple amps in a system, an additional 80-amp in-line Fuse between the distribution block and this amplifier is.
Check StockMemphis Audio VIV400.4 SIX FIVE Series 400W 4-Channel Car Amplifier
- 65 watts RMS x 4 at 4 ohms (100 watts RMS x 4 at 2 ohms) | 200 watts RMS x 2 bridged at 4 ohms (4-ohm stable in bridged mode).
- Front channels: Variable high- or low pass filter (10-5,000 Hz, 24 dB/octave).
- Rear channels: Variable high-pass filter (10-500 Hz, 24 dB/octave) | Variable low-pass filter (50-5,000 Hz, 24 dB/octave) | Bandpass filter engages both.
- Variable bass boost (0-18 dB at 45 Hz) on front and rear channels.
- Dimensions: 10-15/16″W x 2-1/4″H x 8-1/4″D.
Check StockRockville REQ231 Dual 31 Band 1/3 Octave Graphic Equalizer with Sub-Output, Grey
- Rockville REQ231 Dual 31 Band 1/3 Octave Graphic Equalizer With Sub-Output. Dual channel (31 bands per channel). Variable stage low and high cut filters..
- 1/3 octave filter sets (ISO centers). 20 Hz to 20 kHz effective equalization range. Constant Q filters. Selectable 6dB or 12dB cut or boost range. Output level LEDs (-10 to +17 dB)..
- Bypass switch with status LED. Balanced XLR input/output. Subwoofer out. Channels: 2 (stereo). Connectors: XLR balanced inputs and outputs. Bands: 31 per channel..
- Frequency Centers: 20 Hz, 25 Hz, 31.5 Hz, 40 Hz, 50 Hz, 63 Hz, 80 Hz, 100 Hz, 125 Hz, 160 Hz, 200 Hz, 250 Hz, 315 Hz, 400 Hz, 500 Hz, 630 Hz, 800 Hz, 1 kHz, 1.25 kHz, 1.5 kHz, 2 kHz, 2.5 kHz.
- Control Range: Selectable +/-12dB 0r +/-6dB. Input Impedance: 50k ohms. Output Impedance: 600 ohms. Maximum Output Level: +21dBLevel Control: +/- 10 dB. Signal to Noise: 003e93 dB. Distortion: 0.005%..
Check StockAudio2000'S ASP5210A -Watt -Channel Unpowered Speaker Cabinet
- Banana Jacks for Speaker Cable Connection.
- 12dB / Octave High-Pass Crossover Network.
- Sensitivity: 94 dB@1W 1M ^1 X 10" Woofer + 2 X 3 1/2" Tweeters ^Banana Jacks for Speaker Cable Connection ^Internal Speaker Mounting Top Hat ^12dB / Octave High-Pass Crossover Network.
Check StockKICKER 48KMA8001 800 Watt 1-Ohm Marine/Boat Mono Amplifier Sub Amp KMA800.1
- Specifications: POWER [watts/ch], 1 OHM MONO: 800 x 1, DYNAMIC POWER [watts]: 1200, COMES WITH WIRED REMOTE: Yes..
- DIMS [in] all models 2-5/16H x 7-1/8W x_L: 8-1/16, DIMS [cm] all models 5.9H x 18.0W x_L: 20.5..
- FREQUENCY RESPONSE [Hz]: 10-20k, +0/-1dB, INPUT SENSITIVITY: High Level 250mV-10V, Low Level 125mV-5V..
- SIGNAL-TO-NOISE RATIO: 95dB, a-weighted, re: rated power, ACTIVE CROSSOVER: 12dB/octave, variable 50-200Hz, low pass only..
- SUBSONIC FILTER: 24dB/octave, high pass fixed 25Hz, KickEQ BOOST: Variable 0-6dB, centered 40Hz..
Check StockDell Pro Headset
- Product Type: Headset, Connection: USB-A/3.5mm Stereo Jack, Cable Length: 4.9 ft (1.5 m), Ear Pad Material: Synthetic Leather.
- Headphones: [Audio output] Stereo, [Sensitivity] 94db+/-3db [Response frequency] 20-20,000Hz [Other] Adjustable headband.
- Microphone: [Type] Boom [Sensitivity] -47dB+/-3db [Response frequency] 150-7000Hz [Adjustment range] 270° rotation [Noise cancellation].
- Control: Status LED, microphone mute, volume (+/-), speaker mute. *Supports USB connection only.
- Compatible operating systems: Windows 7 and later, Mac OS 10.7 or later, Linux.
- [Dimensions/Weight] Headset: 6.3 x 6.1 x 2.3 inches (161.5 x 155.2 x 59.8 mm).
- Ear pads: 2.4 x 2.4 x 0.4 inches (60 x 60 x 10 mm).
- Package Contents: Headset, headset control, documents.
Check Stock