Top Feeler Gauges

Stainless Steel Feeler Gauge Measuring Tool Dual Marked Metric and Imperial Measuring (0.038-1.02 mm,25 Blades)

  • Feeler gauge set: made of 65 manganese steel, each measuring feeler gauge has 25 blades thickness.
  • Foldable feeler gauges, easy and convenient to take and store.
  • Easy identification: dual marked metric and imperial, 0.0015 inch/ 0.038 mm to 0.04 inch/ 1 mm, the numbers of size are etched into feeler gauge for easy identification.
  • Metric sizes (mm): 0.038, 0.127, 0.152, 0.178, 0.203, 0.229, 0.254, 0.279, 0.305, 0.330, 0.356, 0.381, 0.406, 0.432, 0.457, 0.483, 0.508, 0.533, 0.635, 0.686, 0.762, 1.
  • Inch sizes: 0.0015, 0.002, 0.003, 0.004, 0.005, 0.006, 0.007, 0.008, 0.009, 0.010, 0.011, 0.012, 0.013, 0.014, 0.015, 0.016, 0.017, 0.018, 0.019, 0.020,0. 021, 0.025, 0.027, 0.030, 0.040.
  • Warm notice: there is some anti-rust oil on the stainless steel feeler gauge to prevent it from rusty, please don’t worry about that.
Check Stock

Stainless Steel Feeler Gauge Dual Marked Metric and Imperial Measuring Tool (0.005/0.127-0.02/0.508 mm, 16 Blades)

  • Feeler gauge set: made of 65 manganese steel, each measuring feeler gauge has 16 blades thickness.
  • Foldable feeler gauges, easy and convenient to take and store.
  • Easy identification: dual marked metric and imperial, 0.005/ 0.127 -0.02/ 0.508 mm, the numbers of size are etched into feeler gauge for easy identification, Warm notice: Please check the product specification and size before purchase..
  • Metric sizes (mm): 0.127 mm, 0.152 mm, 0.178 mm, 0.203 mm, 0.229 mm, 0.254 mm, 0.279 mm, 0.305 mm, 0.330 mm, 0.356 mm, 0.381 mm, 0.406 mm, 0.432 mm, 0.457 mm, 0.483 mm, 0.508 mm.
  • Inch sizes: 0.005, 0.006, 0.007, 0.008, 0.009, 0.010, 0.011, 0.012, 0.013, 0.014, 0.015, 0.016, 0.017, 0.018, 0.019, 0.020 inches.
  • Warm notice: there is some anti-rust oil on the stainless steel feeler gauge to prevent it from rusty, please don't worry about that.
Check Stock

Stainless Steel Feeler Gauge Measuring Tool Dual Marked Metric and Imperial Measuring (32 Blades,0.03-1 mm)

  • Feeler gauge set: made of 65 manganese steel, each measuring feeler gauge has 32 blades thickness.
  • Foldable feeler gauges, easy and convenient to take and store.
  • Easy identification: dual marked metric and imperial, 0.001 inch/ 0.03 mm to 0.04 inch/ 1 mm, the numbers of size are etched into feeler gauge for easy identification.
  • Metric sizes (mm): 0.03, 0.04, 0.05, 0.06, 0.07, 0.08, 0.09, 0.10, 0.13, 0.15, 0.18, 0.20, 0.23, 0.25, 0.28, 0.30, 0.33, 0.35, 0.38, 0.40, 0.45, 0.50, 0.55, 0.60, 0.63, 0.65, 0.70, 0.75, 0.80, 0.85, 0.90, 1.00.
  • Inch sizes: 0.001, 0.0015, 0.002, 0.0025, 0.028, 0.003, 0.0035, 0.004, 0.005, 0.006, 0.007, 0.008, 0.009, 0.01, 0.012, 0.013, 0.014, 0.015, 0.016, 0.018, 0.02, 0.022, 0.024, 0.025, 0.026, 0.028, 0.03, 0.032, 0.034, 0.034, 0.040.
  • Warm notice: there is some anti-rust oil on the stainless steel feeler gauge to prevent it from rusty, please don’t worry about that.
Check Stock

Stainless Steel Feeler Gauge Dual Marked Metric and Imperial Measuring Tool (0.0015/0.04-0.025/0.635 mm, 26 Blades)

  • Feeler gauge set: made of 65 manganese steel, each measuring feeler gauge has 26 blades thickness.
  • Foldable feeler gauges, easy and convenient to take and store.
  • Easy identification: dual marked metric and imperial, 0.0015/ 0.04 - 0.025/ 0.635 mm, the numbers of size are etched into feeler gauge for easy identification.
  • Metric sizes (mm): 0.04 mm, 0.05 mm, 0.06 mm, 0.08 mm, 0.10 mm, 0.13 mm, 0.15 mm, 0.18 mm, 0.20 mm, 0.23 mm, 0.25 mm, 0.28 mm, 0.30 mm, 0.330 mm, 0.35 mm, 0.38 mm, 0.40 mm, 0.43 mm, 0.48 mm, 0.45 mm, 0.50 mm, 0.53 mm, 0.55 mm, 0.58 mm, 0.60 mm, 0.63 mm.
  • Inch sizes: 0.0015, 0.002, 0.0025, 0.003, 0.004, 0.005, 0.006, 0.007, 0.008, 0.009, 0.010, 0.011, 0.012, 0.013, 0.014, 0.015, 0.016, 0.017, 0.018, 0.019, 0.020, 0.021, 0.022, 0.023, 0.024, 0.025 inches.
  • Warm notice: there is some anti-rust oil on the stainless steel feeler gauge to prevent it from rusty, please don't worry about that.
Check Stock

StewMac String Action Gauge And Ruler Metric Stainless Steel - Designed by StewMac The Original measuring tool for acoustic and electric guitar and bass setup

  • Quality material: these guitar gauge set is made of stainless steel with rounded off edge, rustproof and corrosion-resistant, won't scratch or hurt....
  • Foldable feeler gauge: the feeler gauge applies tempered steel, measurement ranges from 0.0015 inch/ 0.038 mm to 0.035 inch/ 0.889 mm, a common....
  • Understring radius gauge: comes in 9 sizes: 7.25 inch, 9.5 inch, 10 inch, 12 inch, 14 inch, 15 inch, 16 inch, 17 inch, 20 inch.
  • String action gauge ruler: the pocket-sized gauge ruler is marked with metric and imperial scale respectively on 2 sides, can be applied to measure....
  • Notched radius gauge: includes 2 narrow radius gauges and 2 wide radius gauges in 7.25 inch, 9.5 inch, 10 inch, 12 inch, 14 inch, 15 inch, 16 inch, 20....
Check Stock

StewMac Angle Gauge

  • A simple and fast way to consistently set the gap between strings and pickups.
  • Fret a string at the last fret, slide a gauge under it, and raise the pickup until the polepiece touches the gauge.
  • Made of non-magnetic brass, so it won't stick to the polepieces, making it more practical than steel rulers or feeler gauges.
  • Set of 4 gauges in the following thicknesses: 1/32", 1/16", 3/32" and 1/8".
Check Stock

15 Pieces Guitar Luthier Tools Set Including Guitar Radius Gauge, String Action Ruler Gauge, 32 Blades Feeler Gauge, Guitar Notched Radius Gauges for Guitar and Bass Setup

  • Quality material: these guitar gauge set is made of stainless steel with rounded off edge, rustproof and corrosion-resistant, won't scratch or hurt your hands, durable for long-term use.
  • Foldable feeler gauge: the feeler gauge applies tempered steel, measurement ranges from 0.0015 inch/ 0.038 mm to 0.035 inch/ 0.889 mm, a common distance measuring tool for guitar spacing , the chrome plated main shaft makes it easy to clean up.
  • Understring radius gauge: comes in 9 sizes: 7.25 inch, 9.5 inch, 10 inch, 12 inch, 14 inch, 15 inch, 16 inch, 17 inch, 20 inch.
  • String action gauge ruler: the pocket-sized gauge ruler is marked with metric and imperial scale respectively on 2 sides, can be applied to measure string height, bridge saddle height, saddle slot depth, pickup polepiece height, fret slot depth and nut height.
  • Notched radius gauge: includes 2 narrow radius gauges and 2 wide radius gauges in 7.25 inch, 9.5 inch, 10 inch, 12 inch, 14 inch, 15 inch, 16 inch, 20 inch radius, stays parallel to the fingerboard, quickly and accurately find the curvature of a fingerboard or bridge with these radius gauges without taking the strings off.
Check Stock

JTC Tools 24 INCH Engine Block Straight Edge S50C High-Carbon Steel by JTC 1010

  • *Dimension 36mm height and 600 mm length. Convenient hanging hole and edge protector. *Use with feeler gauges to check distortion in engine blocks, cylinder heads and flywheels..
  • Best Quality,Fastest Shipping,Local Service Support.
Check Stock

MusicNomad Precision Nut Height Slotting Gauge Tool (MN601), Silver

  • Gauge Includes the 3 Most Common Nut Height Measurements (.016", .018", .020") for Electric, Acoustic, Classical & Bass Guitars. Plus 3 additional sizes (.012”, .014”, .022”) to accommodate a desire for lower action or a heavier pick attack..
  • Precision, Smooth Stainless Steel without the Annoying, Messy Oil Found on Traditional Feeler Gauge Sets.
  • Laser Etched Sizes (in. & mm) & Instrument Type that Won't Rub Off.
  • Easy to Follow Instructions Printed Right on the Handle.
  • This Gauge is Part of our KEEP IT SIMPLE, SETUP (KISS) Method using our Precision Gauges & Tool Sets.
Check Stock

Vankcp Guitar Luthier Tools, 32 Blades Feeler Gauge, 9 Understring Radius Gauge, 4Pcs Notched Radius Gauge, 1Pcs String Action Gauge Ruler, 2 Fingerboard Guards for Guitar and Bass Setup

  • 32 Blades Feeler Gauge: Made of stainless steel, measuring range: 0.0015 inch/ 0.04 mm to 0.035 inch/ 0.88 mm, It can measure the height of the pickup and strings, the unevenness of the fingerboard etc...
  • 9 Understring Radius Gauge: Set of 9 including: 7.25", 9.5", 10", 12", 14", 15", 16", 17" and 20" radius, It can be applied to accurately measure fret board radius, good for Guitar and Bass Setup maintain and adjustment..
  • 4Pcs Notched Radius Gauge: Include 2 narrow radius gauges and 2 wide radius gauges in 7.25”, 9.5”, 10”, 12”, 14”, 15”, 16”, 20 ” radius, stays parallel to the fingerboard, quickly and accurately find the curvature of a fingerboard or bridge with these radius gauges without taking the strings off..
  • 2Pcs Fingerboard Guard: Two different sizes: Large: 3.2 '' * 0.9 '' Small: 3.2 '' * 0.5 '', Prevents scratching or damaging to guitar or bass fretboard when filing and polishing frets..
  • 1Pcs String Action Ruler: Size 3.5'' X 2'' (L * W), marked with metric and imperial scale respectively on 2 sides, etch printing on double sides, accurate and clear to measure string height, bridge height, nut slot depth, bridge slot depth and pickup height..
Check Stock

ARES 11042-2-Piece Tapered Feeler Gauge and Offset Feeler Gauge Set - Tapered Gauge has 32 Dual-Marked SAE & Metric Sizes - Offset has 16 Dual-Marked Sizes - Precisely Measure Mechanical Clearances

  • SPECIFICATIONS: This set includes two types of feeler gauges. The tapered gauge has 32 blades with a tapered profile to allow for access into tight places. The Offset gauge has 16 blades with an offset design that’s great for awkward areas. Each blade is marked with both metric and SAE sizing, and each set folds neatly into itself for easy transportation and storage. These gauges let you measure tappet clearances, spark plug gaps, bearing clearances, piston ring gaps and more..
  • TAPERED GAUGE SIZES: Inch - 0.001, 0.0015, 0.002, 0.0025, 0.028, 0.003, 0.0035, 0.004, 0.005, 0.006, 0.007, 0.008, 0.009, 0.01, 0.012, 0.013, 0.014, 0.015, 0.016, 0.018, 0.02, 0.022, 0.024, 0.025, 0.026, 0.028, 0.030, 0.032, 0.034, 0.034, 0.040 (Metric - 0.03, 0.04, 0.05, 0.06, 0.07, 0.08, 0.09, 0.10, 0.13, 0.15, 0.18, 0.20, 0.23, 0.25, 0.28, 0.30, 0.33, 0.35, 0.38, 0.40, 0.45, 0.50, 0.55, 0.60, 0.63, 0.65, 0.70, 0.75, 0.80, 0.85, 0.90, 1.00mm).
  • OFFSET GAUGE SIZE: Inch - 0.005, 0.006, 0.007, 0.008, 0.009, 0.010, 0.011, 0.012, 0.013, 0.014, 0.015, 0.016, 0.017, 0.018, 0.019, 0.020 (Metric - 0.127, 0.152, 0.178, 0.203, 0.229, 0.254, 0.279, 0.305, 0.330, 0.356, 0.381, 0.406, 0.432, 0.457, 0.48....
Check Stock

Rustark 4 Pcs Metric Radius Gauge Stainless Metal External and Internal Arc Fillet Concave Convex Measuring Tool Set Including R0.3-1.5/ R1-6.5/ R7-14.5/ R15-25

  • 【What you Get】The Radius Gauges set contains 4 pcs Radius Fillet Gauge in 4 kinds of shape and measuring range: R0.3-1.5/ R1-6.5/ R7-14.5/ R15-25. In addition, we also offer you reliable after-sale service. Pls feel free contact us!!!.
  •  【Long Service Time】Made of stainless metal, not easy to rust in dry environment, Wear resistant and durable, high hardness. NOTE: In order to prevent the feeler gauge from rusty and caton, the surface of each ruler is coated with anti-rust oil. Pls don’t mind..
  • 【Excellent Design】The 360-degree Locking Screw design allows you to unfold or fold it easily.Laser Engraving treatment makes each leaf convenient to identify..
  • 【Multiple Function】Each of feeler gauge have 2 kinds of blades so that it can check both convex and concave surfaces, meeting your different demands.High hardness and precision, good toughness, smooth surface could satisfies your needs..
  • 【Work Great】Widely use in home improvement, machine installation,electric equipment, suitable for designers, engineers, fitter, mechanics to measure the thickness or width of screw, valve, bearing ect..
Check Stock