Top Female Adapter Fittings

GASHER 15PCS Brass Pipe Fitting Hex Bushing Reducer Adapter Reducing Hex Nipple 3/8 Inch NPT x 1/4 Inch NPT

  • Reducer Adapter: Premium solid brass with thicker wall, more durable than iron and iron galvanized pipe fittings, 1/4" NPT male pipe x 3/8" NPT female....
  • Reducing Hex Nipple: Reducing hex nipple for connecting two threaded pipes with different diameters. Male National Pipe Taper (NPT) threads for....
  • Hex Bushing: Has a 3/8” male NPT threaded on one end and a 1/4” female NPT threaded on the other for connecting a female and a male pipe or....
  • These fittings are not allowed to be installed for potable water,NPT thread size does not actual diameter, it is only nominal pipe size..
Check Stock

Class A Customs 13 Gallon Water Tank & Plumbing Kit T-1300-BPK

  • ...Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
  • 13 GALLON TANK MEASUREMENTS 21” x 9” x 16”- Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adapter (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adapter (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adapter (ONE) 5ft. Section of 0.5” ID Vent/Draw Hose (ONE) 5ft. Section of 1.25” ID (1.375” OD) Fill Hose.
Check Stock

AINEED Hose Repair Kit, 3 Sets Solid Brass Garden Hose Quick Connect Male to Female Connectors, 3 Sets 3/4 Inch Brass Garden Hose Repair Connector with 6 Pieces Stainless Steel Clamps

  • [Quick and Easy to Install] These garden hose fittings are very easy to connect and disconnect, quick release allows for easy attach and removal of hose. Convenient quick connect hose adapter provides tight, secure fittings, no-Leak connection.
  • [Life Time Warranty] Confident in our products, if for any reason you are not SATISFIED, contact us and our customer service team will help you RETURN or REFUND.
  • [Package Includes] Come with 3 sets of brass male and female quick connectors, 3 sets of aluminum garden hose repair kit and 6 pieces rubber washers. This hose quick connect brass set is durable and leak-free for gardening use in all sessions.
  • [Sturdy Hose Repair Kit] 3 male & 3 female garden hose repair ends, made of premium aluminum with copper-like color surface, and 304 stainless steel clamps, use for repairing or replacing broken female or male hose connector, water hose end.
  • [Durable Material] Made of high quality brass, rust proof solid brass to make sure connector fittings are durable enough with no leaking quality. Quick disconnect fittings allow easy attach and removal of the connector anytime.
Check Stock

SpringSpray 1-1/2\ NPT Male x 1-1/2\ NST (NH) Male Brass Hexagonal Nipple Fitting Fire Equipment Hex Nipple Doule Male Fire Hose Adapter

  • ...UE DESIGN】- With hexagonal section in the middle for an increased bearing surface when adjusting the fitting with a wrench. Hex tube fitting as a short length of pipe with threaded ends for connecting threaded pipes.
  • ⚒【WIDE APPLICATION】- Male to male adapters are used to bridge two female hose, pipe or valve fittings. Suitable for use in general firefighting applications. Brass fire hydrant adapter fittings are used for connecting fire hose, PVC pipe, and other low-pressure pipes in the fire brigade, industry, refinery, building industry, agriculture, shipping, military, and civil protection.
  • ⚒【100% SATISFACTION SERVICE】-We have a professional product development team. If you have any questions about compatibility or any dissatisfaction, please feel free to contact us and we will help you solve it perfectly.
Check Stock

3 Pack NPT 1/2"Male x G1/2" Female Brass Pipe Fitting Reducer Thread Adapter

  • Machined Brass material make it strongest construction for prolonged service life..
  • 1/2 inch NPT Male Pipe to 1/2 inch Female Pipe,3 pack adapter..
  • Brass for corrosion resistance,ductility at high temperatures,and low magnetic permeability..
  • Brass adapter has a male NPT threaded end,Female G threaded end,and connects hoses or fittings of different types..
  • Suitable for bathroom&kitchen faucet connection, bathroom shower connection..
Check Stock

POHIR Pressure Washer Adapter Set, 14-Pack Quick Connect Fittings, 3/8 Power Washer Quick Disconnect Kit with M22 Swivel to 3/8'' Quick Connect, 3/4\ to Quick Release and M22 15mm to 14mm Male

  • 14-Pack Quick Connect Kit - 4-pieces Metric M22-14 female to 3/8 quick plug, 2-pieces m22 14mm female to 3/8 quick disconnect, 2-pieces M22 14mm male to 3/8’’ quick disconnect, 2-pieces M22 14mm male thread to m22 14/15 male, 2-pieces 3/4 female to 1/2 quick connect, 2-pieces 1/2 plug to 3/4 male.
  • Easy Connect & Disconnect - M22 quick connect fittings help pressure washer hose quick connect to pressure washer pump or gun. The 3/4 quick coupler fits all 3/4" GHT (garden hose thread) watering equipment..
  • M22 Male to Male - 1x M22 15mm male to 14mm male and 1x M22 14mm to 14mm male adapter, convert the metric M22 14mm male thread to the M22 14mm or 15mm swirl as needed..
  • High-Quality Brass Quick Connect - Made of solid brass, stainless steel and engineering plastics, for a safe and leak free connection. These quick connect fittings are durable, rust proof, providing secure fittings and are convenient for frequent connection. .
  • Warm Tips: Inner diameter of M22 -14 swivel is 14MM NOT 15mm. Do NOT use the threaded 14MM to connect M22-15mm fittings, or it will cause leakage. Please lubricate the accessories before use..
Check Stock

EVIL ENERGY 6AN to 6AN Male Flare Coupler Union Straight Fuel Hose Adapter Fitting Black 2 PCS

  • Package Included: 2 pcs x 6AN to 6AN Male Flare Coupling Union Adapter.
  • Thread size of 6AN male coupler is 9/18-18 JIC, can use to splice or extend a line, works with female thread fitting..
  • Black 6061-T6 aluminum 6AN flare union work temperature: -65 to +252 degree F, max pressure: 1000 psi, ultimate torque: 25N..
  • Male to male flares coupler usually used in fuel system,such as fuel hose extend, line connect to fuel filter, fuel pump, cooler system..
  • Mala union fittings can works with EVIL ENERGY Swivel fitting, push lock fitting and female AN fittings.Please match the correct size..
Check Stock

Boltigen Car A/C R134a R1234yf Quick Coupler, R134a to R1234yf Quick Adjustable Adapter Connector Conversion Kit for AC Refrigerant Charging

  • 【R134a Quick Adapter】This set of two R134a quick couplers works perfectly with R134a service ports.
  • provided adapters also ensure compatibility with 1/4-inch male flare fittings. 6-ball design of these high and low-pressure R134a quick couplers also provides superior protection against wasteful refrigerant leakage..
  • 【R1234YF Quick Coupler】Blue R1234YF Low Side adapter: Low side R1234yf coupler 14 mm female x 1/4"SAE male. R12 to R134a Adapter Connector: 1/4" SAE female x low pressure 13mm R134A quick coupler. Red R1234YF High Side Quick Coupler: High side R1234yf coupler 17 mm female x 1/4"SAE male. R12 to R134a Adapter Connector: 1/4" SAE female x High pressure 16mm R134A quick coupler..
  • 【Car Quick Adapter Kit】 R-134a adapters with r134a convert to r-1234yf adapters ideal for connecting with basic or advanced manifold gauges and serving on automotive air conditioner refrigerant recharge work..
  • 【No Leakage】The combination of the ball lock design and rubber seal provides excellent sealing performance. AC gauge adapter set with automatic closing function, easier and more convenient to disassemble and install..
  • 【Material】The R134a R1234YF adapters are made of brass, aluminum and steel materials for long lasting, featuring different tempe....
Check Stock

Tecmolog Brass Pipe Fittings Connector G 1/2 Female Thread (Metric BSP) to US 1/2 NPT Male Thread Pipe Fitting Converter Adapter, SBA037

  • BSP to NPT Adapter: Metric BSP 1/2" (G) female to NPT 1/2" male pipe fitting converter, easily change from standard EU metric to US inches.
  • Brass Pipe Fittings 1/2: This adapter is made of brass for resistance to corrosion, ductility at high temperatures, and low magnetic permeability.
  • Rubber Washers and Teflon Tape for a Perfect Seal: Come with an o-ring for the G1/2 side and the 1/2 " NPT side to produce a leak free connection.
  • Connect Hoses or Fittings of US plumbing: This is used to adapt the plumbing to NPT on bath or kitchen fixture, and European hose fittings.
  • Easy to Install: It has a hexagonal section in the middle for an increased bearing surface when adjusting the fitting with a wrench.
Check Stock

POHIR Pressure Washer Adapter Set Quick Connect Kit,M22 14mm X 3/8 Male Plug Female Socket Brass Pressure Washer Quick Connect Fittings Quick Coupler for Pressure Washer Gun or Hose

  • ♛【Quick Connect Kit for Pressure Washer】：1 coupler M22 14mm female + 3/8 inch male plug, 1 coupler M22 14mm female + 3/8 inch female socket,....
  • ♛【Universal Pressure Washer Adapter】 : Fittings apply on universal gun, hose and pump connection. Use for most brands of pressure washeres.....
  • ♛【M22 to 3/8 Quick Connect】:2 pcs quick disconnect kit, can quickly connect & disconnect water outlet of pump to pressure washer hose or connect....
  • ♛【General Pressure Washer Adapter Accessories】：M22 14mm fitting 3/8 inch male plug female socket is compatible, M22 14mm female thread to M22....
  • ♛【Great Gift for Car Wash】：Quick disconnect plug high pressure brass fitting quick coupler, fits perfectly with power washer, pressure washer....
Check Stock

DOZYANT 12 Feet 1/2 inch ID Natural Gas Grill Hose with Quick Connect Fittings Assembly for Low Pressure Appliance -3/8 Female to 1/2 Male Adapter for Outdoor NG/Propane Appliance - CSA Certified

  • The 3/8" Female Flare by 1/2" Male Flare Brass Adapter is included to allows you to convert NG to 3/8" male connector standard propane appliance.
  • 1/2" ID Hose with 1/2" Quick Disconnect Plug x 1/2" Female Flare Fittings & 3/8" Female Flare by 1/2" Male Flare Brass Adapter.
  • 1/2 inch inside diameter hose has the BTU capacity needed for 30-inch and larger grills for use with natural gas.
  • 12 Feet Flexible hose used in natural gas or propane applications, allows you to move gas appliance around. Connects any outdoor NG appliance to the....
  • Comes with dust cap and plug to protect the brass adapter.CSA certificated - Pass CSA certificate for your safety.
Check Stock

Boltigen R134A Can Tap, R134A Self-Sealing and Puncture Style Refrigerant Can Tap Valves with Refrigerant Tank Adapters for Refilling Automotive Air Conditioning Systems

  • ...Compatibility: Our R134a self sealing can tap valve refrigerant dispenser and non-self sealing can tap valve with 1/2 female thread to compatible with 1/4" SAE (R12 R22) female fitting AC charging hose, and it comes with R134A can tap refrigerant dispenser and tank adapter, compatible with both 1/4" and 1/2" female fittings ac charging hose, and opener connecting thread and interface thread is 1/2 inch, the can tap is only suitable for R-134a cans with 1/2’’ thread..
  • SERVICE: Our QC department does 100% quality inspection on the R134A can tap and adapter before delivery. We will do 100% refund if the R134a valve tool is defective. If you have any questions about the can tap you have bought, please feel free to connect us. Your valuable suggestions and advice will be greatly appreciated by our team..
Check Stock