Top Ferrous Insert

OSCARBIDE Carbide Turning Inserts CCMT060204 CCMT21.51 CCMT Insert Mutilayer Coated CNC Lathe Inserts for Lathe Turning Tool Holder Cut Off Tools 10 Pieces

  • Size: CCMT 21.51(CCMT060204), 3/32" Thick,1/64" Radius..
  • Material: made of solid carbide with mutilayer coated, offer long life and faster cutting speed, low friction coefficient, good wear resistance.
  • Designed for Steel, cast iron and non-ferrous materials.
  • Used for turning and finishing on a wide range of materials.
  • 80 degrees diamond single sided insert with molded chipbreaker, 10pcs/pack.
Check Stock

OSCARBIDE Carbide Inserts APKT1604 TiAlN Coated Indexable Milling Inserts APKT Style,10 Piece/Box

  • APKT 1604 carbide turning inserts,85 degrees parallelogram,Relief Angle 11 degrees,nose radius 1/32"..
  • Made of Tungsten Carbide,TiAlN Coated ,the cutting speed are 4-7 time faster than generic steel,and Sharpened on a diamond wheel to make it longer tool life, providing you a better experience and durable use and Better cut.
  • Designed for cast iron and non-ferrous materials,good for both finishing and roughing.
  • Used for indexable face mill and end mill,Performing square milling and side milling,ramping milling, helical milling, slotting milling, plunging milling..
  • These Insert fit for our Carbide Indexable End Mills and other same size indexable end mills, please search B07SG8JKDS or B099WPXW29 to buy this indexable end mills.
Check Stock

Jacquard Indigo Tie Dye Kit (Mini) 2 Pack

  • Contains NO INSTRUCTIONS and no additional supplies, just the three ingredients you’ll need to create an active ferrous indigo vat AKA the copperas vat. Copperas is the antiquated name for ferrous sulfate heptahydrate This is intended for dyers with experience mixing an indigo vat..
  • Includes : 60g of 10% natural plant indigo extract. Grown and processed in USA! 100g of Ferrous Sulfate Heptahydrate (Iron) 160g of Calcium Hydroxide (Slaked Lime) In a bag. That’s it.
Check Stock

THINBIT 3 Pack SPT045D5 'S' Series, Uncoated Carbide, Parting Insert for Non-Ferrous Alloys, Aluminium and Plastic Without Interrupted Cuts

  • See Downloads section below item photos for detailed product information, technical information and compatible toolholders..
  • Narrow widths reduce material loss and part deflection. Perfect for precious metals, thin wall tubing and small diameter parts. Cuts within 1/16" of collet face or shoulder of larger diameter..
  • Use for parting solid stock up to 1.000" or tubing with wall thickness up to .500"..
  • Uncoated DURA-MAX 5000 carbide parting insert for non-ferrous alloys, aluminium and plastic without interrupted cuts..
Check Stock

25pcs T118B 75mm Long HCS 6 TPI T Shank Metal Cutting Jigsaw Blades Power Tool Accessories for 3-6 mm Thin Metals Sheet Metal Fine Cut

  • Ideal for cutting sheet metal and thin metals (ferrous and non-ferrous). For thin to medium metals 2/8" to 1/4" (3-6 mm)..
  • 6 TPI tooth profile and high carbon steel blade body for exceptionally fast cutting and long life in thin metals..
  • These jigsaw blades are the economical choice for cutting sheet metal and thin metals (ferrous and non-ferrous). Ideal for straight-line and fast....
  • Made of high carbon steel construction, sturdy and durable, wear resistance and can be use for a long time..
  • Package includes 25 pieces of universal Jigsaw saw blade accessory kit..
Check Stock

THINBIT 3 Pack LGPT045D5 'L' Series, Uncoated Carbide, Parting Insert for Non-Ferrous Alloys, Aluminium and Plastic Without Interrupted Cuts

  • See Downloads section below item photos for detailed product information, technical information and compatible toolholders..
  • Narrow widths reduce material loss and part deflection. Perfect for precious metals, thin wall tubing and small diameter parts. Cuts within .062" of collet face or shoulder of larger diameter..
  • Use for parting solid stock up to 1.000" or tubing with wall thickness up to .500"..
  • Uncoated DURA-MAX 5000 carbide parting insert for non-ferrous alloys, aluminium and plastic without interrupted cuts..
  • Use with Large series toolholders. Use any straight or 90 degree toolholder..
Check Stock

THINBIT 3 Pack LGPT085D5 'L' Series, Uncoated Carbide, Parting Insert for Non-Ferrous Alloys, Aluminium and Plastic Without Interrupted Cuts

  • See Downloads section below item photos for detailed product information, technical information and compatible toolholders..
  • Narrow widths reduce material loss and part deflection. Perfect for precious metals, thin wall tubing and small diameter parts. Cuts within .043" of collet face or shoulder of larger diameter..
  • Use for parting solid stock up to 1.000" or tubing with wall thickness up to .500"..
  • Uncoated DURA-MAX 5000 carbide parting insert for non-ferrous alloys, aluminium and plastic without interrupted cuts..
  • Use with Large series toolholders. Use any straight or 90 degree toolholder..
Check Stock

THINBIT 3 Pack LGOR095D5CR010 'L' Series, Uncoated Carbide, Static O-Ring Grooving Insert for Non-Ferrous alloys, Aluminium, Plastic Without Interrupted cuts.

  • See Downloads section below item photos for detailed product information, technical information and compatible toolholders..
  • Uncoated DURA-MAX 5000 carbide Static O-Ring grooving insert for non-ferrous alloys, aluminium, plastic without interrupted cuts..
  • .095" tip width with .010" corner radii. 7 degree included angle. .250" depth of cut. Internal grooving with 1.250" minimum bore..
Check Stock

THINBIT 3 Pack LGPT045D57L 'L' Series, Uncoated Carbide, Parting Insert for Non-Ferrous Alloys, Aluminium and Plastic Without Interrupted Cuts

  • See Downloads section below item photos for detailed product information, technical information and compatible toolholders..
  • Narrow widths reduce material loss and part deflection. Perfect for precious metals, thin wall tubing and small diameter parts. Cuts within .062" of collet face or shoulder of larger diameter..
  • Use for parting solid stock up to 1.000" or tubing with wall thickness up to .500"..
  • Uncoated DURA-MAX 5000 carbide parting insert for non-ferrous alloys, aluminium and plastic without interrupted cuts..
  • Use with Large series toolholders. Use any straight or 90 degree toolholder..
Check Stock

THINBIT 3 Pack SGI039D5 0.039\ Width 0.100\ Depth, Uncoated Carbide, Sharp Corner, Grooving Insert for Non-Ferrous Alloys, Aluminium and Plastic Without Interrupted Cuts

  • See Downloads section below item photos for detailed product information, technical information and compatible toolholders..
  • Perfect for o-rings, snap rings and piston rings. Cuts within 1/16" of collet face or shoulder of larger diameter..
  • Designed for plunge grooving up to .100" deep. Can also be used for parting stock up to .200"..
  • Uncoated DURA-MAX 5000 carbide grooving insert for non-ferrous alloys, aluminium and plastic without interrupted cuts..
Check Stock

THINBIT 3 Pack LGPT025D5R 'L' Series, Uncoated Carbide, Parting Insert for Non-Ferrous Alloys, Aluminium and Plastic Without Interrupted Cuts

  • See Downloads section below item photos for detailed product information, technical information and compatible toolholders..
  • Narrow widths reduce material loss and part deflection. Perfect for precious metals, thin wall tubing and small diameter parts. Cuts flush to collet face or shoulder on main spindle side using M03 or sub-spindle side using M04..
  • Use for parting solid stock up to .400" or tubing with wall thickness up to .200"..
  • Uncoated DURA-MAX 5000 carbide parting insert for non-ferrous alloys, aluminium and plastic without interrupted cuts..
  • Use with Large series toolholders. Use RH straight or LH 90 degree toolholder..
Check Stock

THINBIT 3 Pack LGPT062D5R 'L' Series, Uncoated Carbide, Parting Insert for Non-Ferrous Alloys, Aluminium and Plastic Without Interrupted Cuts

  • See Downloads section below item photos for detailed product information, technical information and compatible toolholders..
  • Narrow widths reduce material loss and part deflection. Perfect for precious metals, thin wall tubing and small diameter parts. Cuts flush to collet face or shoulder on main spindle side using M03 or sub-spindle side using M04..
  • Use for parting solid stock up to 1.000" or tubing with wall thickness up to .500"..
  • Uncoated DURA-MAX 5000 carbide parting insert for non-ferrous alloys, aluminium and plastic without interrupted cuts..
  • Use with Large series toolholders. Use RH straight or LH 90 degree toolholder..
Check Stock