Top Fiber Optical Power Meter

New Upgraded Network Cable Tester with Optical Power Meter VFL, RJ45 Wire Cable Tracer for Telephone, Ethernet, Video, Tone Generator,CAT5 CAT6 Cable Toner Ethernet Cable Tester PoE

  • Anti-interference Network Cable Tester: Adopt advanced digital/analog/POE mode, high sensitivity, less noise interference, easy to accurately locate the target cable, widely used in engineering wiring, network and equipment maintenance.
  • Optical power Meter Test & Port Flashing: Connect the network cable to be tested to the transmitter, the wire tracker will automatically detect the optical fiber frequency and the port indicator will flash on the same screen, which can display the working speed of the port, which is convenient for accurately locating the line and port..
  • Multifunctional Network Cable Tester: There are nine features to meet your needs. Continuity testing, cable scan, port flash, length measurement, POE Power Supply Test, QC testing, optical power meter, VFL function, and NVC function..
  • PoE Testing: PoE testing can check cable mapping polarity and voltage of PoE network switches, withstand 60VDC. Automatically detects and switches between 10M/100M/1000M modes. Includes cable tracking, short circuit test, interruption of circuit test and etc.
Check Stock

WANLUTECH OTDR Tester CCTV Tester, 1310/1550nm OTDR Fiber Optic Tester 8'' Touchscreen Built-in DMM OPM OLS VFL Event Map Support TVI CVI AHD IP CVBS Camera Test PoE/HDMI in/RJ45 Cable TDR Test

  • ✅【All-in-one OTDR Tester】WANLUTECH MT-8000 combines all necessary fiber optic testing in one handheld device.This OTDR tester includes Optical Time Domain Reflectometer (OTDR:1310nm+1550nm,28dB/26dB,max test distance can up to 110km), Visual Fault Locator (VFL:max test distance 8km), Optical Power Meter (OPM:measurement range -70~+10 dBm), Light Source (CW,270 Hz, 330 Hz, 1 kHz and 2 kHz),Digital Multimeter(DMM) , Optical Loss Test, RJ45 cable test, Event Map, etc..
  • ✅【Professional OTDR Fiber Optic Tester】WANLUTECH OTDR tester uses automatic testing by default, just click to start testing after connecting into the fiber, there is no complicated parameter setting.
  • professional technicians can set the test range, pulse width and other parameters before testing, which will get more accurate curve results.Warning function could prevent OTDR module from being damaged by optical signal in fiber..
  • ✅【Parameters】WANLUTECH multifunctional Single Mode OTDR has 8'' retina touch screen, 2048*1536 resolution. OTDR fiber tester is powered by 7.4V/7000mAh Li-polymer batter with long working time.Interface type:FC-PC.1310nm/1550nm Testing Wavelength and 28....
Check Stock

FiberCablesDirect - 3M OM2 LC SC Fiber Patch Cable | 1Gb Duplex 50/125 LC to SC Multimode Jumper 3 Meter (9.84ft) | Length Options: 0.5M-300M | 1gb 10gb mmf upc sfp+ 1gbase mmd dplx pvc ofnr om2-lc-sc

  • ...einforced, PVC jacket. | Education, Corporate, Military/Defense, Government, Healthcare, Finance and General Commercial, Computer Networking Applications..
  • Fiber Patch Cable Details: 3 Meter (9.84 feet), Duplex (2 fiber strands), 2.0 mm, Outer Diameter, Zip-Cord Reinforced, LC to SC Terminated, Multimode Fiber (MMF) Optical Patch Cable / Jumper Cord..
  • Core / Cladding: Corning 50µm (micron) diameter fiber core / 125µm diameter cladding (1 micron is 1 one-millionth/1 meter). The fiber optic core is surrounded by a transparent, low refraction, cladding material. Light is contained within the fiber core (total internal reflection) causing the fiber within the patch cord assembly to act as a wave-guide. Light travels through the fiber bouncing off the boundary between core & cladding..
  • Optical Modality Details for OM2 Ethernet Over Multimode Fiber: 500/500 MHz-km @850/1300 nm (OM2 - Laser-rated for GbE LANs) | 1Gb Ethernet Distance is 550 Meters at 850/1300 nm | 10Gb Ethernet Distance is 82 Meters at 850/1300 nm..
Check Stock

FiberCablesDirect - 3M OS2 LC LC Fiber Patch Cable | Simplex 9/125 LC to LC Singlemode Jumper - 3 Meter (9.84ft) | Length Options: 1-3M | single-strand smf smplx lc/lc 10gbase 1f yellow ofnr pvc lc-lc

  • Fiber Cable Description: OS2 LC to LC Fiber Patch Cable 3 Meter | Simplex (1 fiber strand) Single Mode fiber optic patch cable, 9/125 Corning optical fiber glass, yellow OFNR Riser Rated PVC jacket, 2.0mm outer diameter, zip-cord reinforced. | Education, Corporate, Military/Defense, Government, Healthcare, Finance, General Commercial, Computer Networking Applications..
  • Fiber Patch Cable Details: 3 Meter (9.84 feet), Simplex, 2.0mm Outer Diameter, Zip-Cord Reinforced, SMF (Singlemode fiber) Patch Cables / Jumper Cords..
  • Core / Cladding: Corning 9 micron diameter fiber core / 125 micron diameter cladding (1 micron is 1 one-millionth/1 meter). The fiber optic core is surrounded by a transparent, low refraction, cladding material. Light is contained within the fiber core (total internal reflection) causing the fiber within the patch cord assembly to act as a wave-guide. Light travels through the fiber bouncing off the boundary between core & cladding..
  • Optical Mode Type: OS2 (9/125 Singlemode) – 9 micron core, 125 micron cladding. 10 Gigabit speed from 5-10km at 1310nm (10Gbase-L) and 30-40km at 1550nm (10Gbase-E) with 0.4 dB/km maximum attenuation, atm applications. Audio, video, data services supported. ISO / IEC 24702.
Check Stock

FiberCablesDirect - 1M OM1 LC LC Fiber Patch Cable | 1Gb Duplex 62.5/125 LC to LC Multimode Jumper 1 Meter (3.28ft) | Length Options: 0.5M - 300M | 1gb 10gb mmf lc-upc sfp 1gbase mmd dx pvc ofnr lc-lc

  • ...Finance and General Commercial, Computer Networking Applications..
  • Fiber Patch Cable Details: 1 Meter (3.28 feet), Duplex (2 fiber strands), 2.0mm Outer Diameter, Zip-Cord Reinforced, LC to LC Terminated (Max Connector Loss: 0.50 dB, Typical Connector Loss: 0.30 dB, Typical Return Loss -25 dB), Multimode Fiber (MMF) Optical Patch Cable / Jumper Cord..
  • Core / Cladding: Corning 62.5µm (micron) diameter fiber core / 125µm diameter cladding (1 micron is 1 one-millionth/1 meter). The fiber optic core is surrounded by a transparent, low refraction, cladding material. Light is contained within the fiber core (total internal reflection) causing the fiber within the patch cord assembly to act as a wave-guide. Light travels through the fiber bouncing off the boundary between core & cladding..
  • Optical Modality Details for OM1 Ethernet Over Multimode Fiber: 1Gb Ethernet Distance of 300 Meters at 850 nm / 600 Meters at 1310 nm. 10Gb Ethernet Distance of 33 Meters at 850/1300 nm. OM1 Bandwidth is 160-200/500 MHz-km @850/1300 nm..
  • Durable Construction, Commercial Grade, Cost Effective and Built to Last | 100% Lifetime Warranty on All Fiber Cables Direct Products. Superior packaging for safe delivery anywhere in the world, using any available carrier and selected....
Check Stock

FiberCablesDirect - 5M OM4 LC LC Fiber Patch Cable | 100Gb Duplex 50/125 LC to LC Multimode Jumper 5 Meter (16.40ft) | Length Options: 0.5M-300M | 10/40/100gb mmf sfp+ 100gbase dplx ofnr om4-lc-lc

  • Fiber Cable Description: OM4 LC LC Fiber Patch Cable 5M | 100Gig, Corning, Laser Optimized Multimode Fiber (LOMMF), 50/125 optical fiber core/cladding. Aqua, 2.0mm outer diameter, zip-cord reinforced, jumper. Used in educational, corporate, military/defense, government, healthcare, finance and commercial industries..
  • Fiber Patch Cable Details: 5 Meter (16.40 feet), 1/10/40/100Gb Multimode, Zip-Cord Reinforced, Duplex (2 Fiber Strands), 1.25mm ceramic ferrule, LC-UPC to LC-UPC, Fiber Patch Cable/Jumper Cord..
  • Core / Cladding: Corning 50µm (micron) diameter fiber core / 125µm diameter cladding (1 micron is 1 one-millionth/1 meter). The fiber optic core is surrounded by a transparent, low refraction, cladding material. Light is contained within the fiber core (total internal reflection) causing the fiber within the patch cord assembly to act as a wave-guide. Light travels through the fiber bouncing off the boundary between core & cladding..
Check Stock

FiberCablesDirect - 3M OM2 LC LC Fiber Patch Cable | 1Gb Duplex 50/125 LC to LC Multimode Jumper 3 Meter (9.84ft) | Length Options: 0.5M - 300M | 1gb 10gb mmf lcupc sfp 1gbase mmd dx PVC ofnr lc-lc

  • ...inforced, PVC jacket. | Education, Corporate, Military/Defense, Government, Healthcare, Finance and General Commercial, Computer Networking Applications..
  • Fiber Patch Cable Details: 3 Meter (9.84 feet), Duplex (2 fiber strands), 2.0 mm, Outer Diameter, Zip-Cord Reinforced, LC to LC Terminated, Multimode Fiber (MMF) Optical Patch Cable / Jumper Cord..
  • Core / Cladding: Corning 50µm (micron) diameter fiber core / 125µm diameter cladding (1 micron is 1 one-millionth/1 meter). The fiber optic core is surrounded by a transparent, low refraction, cladding material. Light is contained within the fiber core (total internal reflection) causing the fiber within the patch cord assembly to act as a wave-guide. Light travels through the fiber bouncing off the boundary between core & cladding..
  • Optical Modality Details for OM2 Ethernet Over Multimode Fiber: 500/500 MHz-km @850/1300 nm (OM2 – Laser-rated for GbE LANs) | 1Gb Ethernet Distance is 550 Meters at 850/1300 nm | 10Gb Ethernet Distance is 82 Meters at 850/1300 nm..
  • OM2 Fiber Network Bandwidth: 1500MHz-km @ 850nm / 2000MHz-km @ 1300nm. Durable Construction, Commercial Grade | Cost Effective and Built to Last | 100% Lifetime Warranty on All Fiber Cables Direct Products. Superior packaging for saf....
Check Stock

FiberCablesDirect - 1M OM4 LC LC Fiber Patch Cable | Bend Insensitive Plenum 100G Duplex 50/125 LC to LC Multimode Jumper 1 Meter (3.28ft) | Length Options: 0.5M-300M | 10/40/100g mmf lc-lc om4-lc-lc

  • Fiber Cable Description: OM4 LC LC Bend Insensitive Plenum Fiber Patch Cable 1M | 100Gig, Corning, Laser Optimized Multimode Fiber (LOMMF), 50/125 optical fiber core/cladding. Aqua, 2.0mm outer diameter, zip-cord reinforced, jumper. Used in educational, corporate, military/defense, government, healthcare, finance and commercial industries..
  • Fiber Patch Cable Details: 1 Meter (3.28 feet), 1/10/40/100Gb Multimode, Zip-Cord Reinforced, Bend Insensitive, Plenum, Duplex (2 Fiber Strands), 1.25mm ceramic ferrule, LC-UPC to LC-UPC, Fiber Patch Cable/Jumper Cord..
  • Core / Cladding: Corning 50µm (micron) diameter fiber core / 125µm diameter cladding (1 micron is 1 one-millionth/1 meter). The fiber optic core is surrounded by a transparent, low refraction, cladding material. Light is contained within the fiber core (total internal reflection) causing the fiber within the patch cord assembly to act as a wave-guide. Light trave....
Check Stock

Fluke Networks FTK1000 SimpliFiber Pro Multimode Fiber Verification Kit Fiber Tester

  • SimpliFiber Pro optical power meter with multimode light source.
  • Supports multimode 850 and 1300 nm wavelengths.
  • Reduce test time by testing and recording dual wavelength from a single measurement port.
  • Check active feature warns use when connected to a live fiber.
Check Stock

10KM Fiber Optical Power Meter with Visual Fault Locator Optic Cable Tester Checker and FC-LC Adapter Test Tool for CATV Telecommunications Engineering Maintenance

  • Easy and Accurate Identification - It can easily and accurately detect and locate fiber breaks, poor connections, bending or cracking..
  • Universal Connector - the connector of the detector is compatibly designed for ST, SC, FC interferes both in circle and square shape of different fiber optic cables.
Check Stock

FiberCablesDirect - 3M OM1 LC LC Fiber Patch Cable | 1Gb Duplex 62.5/125 LC to LC Multimode Jumper 3 Meter (9.84ft) | Length Options: 0.5M - 300M | 1gb 10gb lc-lc mmf lc-upc sfp 1gbase mmd dx pvc ofnr

  • ...inance and General Commercial, Computer Networking Applications..
  • Fiber Patch Cable Details: 3 Meter (9.84 feet), Duplex (2 fiber strands), 2.0mm Outer Diameter, Zip-Cord Reinforced, LC to LC Terminated (Max Connector Loss: 0.50 dB, Typical Connector Loss: 0.30 dB, Typical Return Loss -25 dB), Multimode Fiber (MMF) Optical Patch Cable / Jumper Cord..
  • Core / Cladding: Corning 62.5µm (micron) diameter fiber core / 125µm diameter cladding (1 micron is 1 one-millionth/1 meter). The fiber optic core is surrounded by a transparent, low refraction, cladding material. Light is contained within the fiber core (total internal reflection) causing the fiber within the patch cord assembly to act as a wave-guide. Light travels through the fiber bouncing off the boundary between core & cladding..
  • Optical Modality Details for OM1 Ethernet Over Multimode Fiber: 1Gb Ethernet Distance of 300 Meters at 850 nm / 600 Meters at 1310 nm. 10Gb Ethernet Distance of 33 Meters at 850/1300 nm. OM1 Bandwidth is 160-200/500 MHz-km @850/1300 nm..
  • Durable Construction, Commercial Grade, Cost Effective and Built to Last | 100% Lifetime Warranty on All Fiber Cables Direct Products. Superior packaging for safe delivery anywhere in the world, using any available carrier and ....
Check Stock

SC/UPC Fiber Optic Attenuator 10dB, 2 Pack，in-Line Attenuator, Male/Female, Single-Mode Fixed, dB Options: 3dB, 5dB, 7dB, 10dB

  • ✅SC/UPC Fiber Optic Attenuato: SC/UPC Male to SC/UPC Female, 10dB, Singlemode fixed, Ceramic Core material, 2 Pack. Provide SC adapters to ensure the connection between fiber patch cable..
  • ✅Low Insert-loss & High Return-loss: Polarization dependent loss ≤0.2dB and Return Loss: ≥ 50dB. Using an attenuator to prevent over saturating an optical receiver when the optical power is too high and ensures low bit error rates preventing damage to receiving fiber optic equipment..
  • ✅Good Repeatability & Intercalation: Widely used in Optical Fiber Distribution Frame, Optical Communication Network, Optical Fiber Broadband Access Network, Optical Fiber CATV, Optical Fiber Testers, FLAN, the performance is stable and reliable..
  • ✅Feature: Light weight, small volume, high accuracy, good stability and convenient operation..
  • ✅Attenuator Application: Optical attenuator is a passive device used to reduce the power level of an optical signal. It is generally used in single-mode long-haul applications to prevent optical overload at the receiver..
Check Stock