Top Fine Wire Voice Coil

Soundstream X5.15 Team 15' Tarantula 7500W Dual 1 Ohm Subwoofer Bass Speaker

  • Overcompensating Motor Structure for Increased Magnetic Strength | 12mm T-Yoke and Top Plate Improve Low Frequency Dynamics | Vented T-Yoke and Frame Reduces Voice Coil Heat Build Up.
  • Non-magnetic Non-resonate Die-Cast Aluminum Frame | 3" 4-Layer Voice Coil with Direct Connect Wire Increases Power Handling | High Temperature Tolerance Adhesives Resist Thermal Failure.
  • Non-Transfer Spruce Pulp Cone with UV and Chemical Protection | Stitched and Glued Surround/Cone Joints for Strongest Bonding | Extended Excursion Polyether Foam Surround with UV and Chemical Protection | Dual Poly-Cotton Suspension Dampen Violent Accelerations.
  • 1-pc Gasket / Trim Ring with Concealed Mounting Holes Included | RMS Power Handling: 1,000W | Max Power Handling: 2,000W | Voice Coil Impedance: 4-Ohm + -Ohm.
  • Mounting Depth: 9.25" | Optimum Sealed Box Volume: 2.00ft3 | Optimum Ported Box Volume: 4.00ft3.
Check Stock

Two Infinity KAPPA103WDSSI 10' high-Performance car Audio subwoofer

  • Most car audio system designs call for 2- or 4-ohm impedance. Kappa Series subwoofers put the choice in your hands..
  • The Kappa Series voice coil employs a two-sided, ducted airflow design that cools the voice coil, increases power handling and improves reliability..
  • Kappa subwoofer cones incorporate glass-fibers for exceptional accuracy and detail. Inherently non-resonant, the glass-fiber cones eliminate distortion so your music—and nothing but your music—comes through loud and clear..
  • The terminals on the Kappa subwoofers accommodate up to 8-guage wire (8.37mm 2 cross section), which transfers low-resistance, low-loss power to the woofer, even over long wire runs..
Check Stock

Soundstream AF.694 Arachnid Full Range 6x9' 4-Way 500W Speakers,Black and Silver

  • Overcompensating Motor Structure for Increased Magnetic Strength | 12mm T-Yoke and Top Plate Improve Low Frequency Dynamics | Vented T-Yoke and Frame Reduces Voice Coil Heat Build Up.
  • Non-magnetic Non-resonate Die-Cast Aluminum Frame | 3" 4-Layer Voice Coil with Direct Connect Wire Increases Power Handling | High Temperature Tolerance Adhesives Resist Thermal Failure.
  • Non-Transfer Spruce Pulp Cone with UV and Chemical Protection | Stitched and Glued Surround/Cone Joints for Strongest Bonding | Extended Excursion Polyether Foam Surround with UV and Chemical Protection | Dual Poly-Cotton Suspension Dampen Accelerations.
  • 1-pc Gasket / Trim Ring with Concealed Mounting Holes Included | RMS Power Handling: 1,000W | Max Power Handling: 2,000W | Voice Coil Impedance: 4-Ohm + -Ohm.
  • Mounting Depth: 7.25" | Optimum Sealed Box Volume: 1.50ft3 | Optimum Ported Box Volume: 2.50ft3.
Check Stock

Power Acoustik BAMF-122 Bumper-122 Subwoofer 3500 Watts 12 inches Dual Suspension,Black

  • 3" dual 2Ω, 4-layer voice-coil configuration with direct-connect wire increases power handling.
  • Overcompensating motor structure for increased magnetic strength.
  • 12mm T-yoke & top plate improve low-frequency dynamics.
  • Vented T-yoke & frame reduce voice-coil heat buildup.
  • Nonmagnetic, nonresonant die-cast aluminum frame.
Check Stock

Power Acoustik BAMF‐152 BAMF Series Subwoofer 15 3,800 Watts max Dual 2Ω

  • 3" dual 2Ω, 4-layer voice-coil with direct-connect wire increases power handling.
  • Overcompensating motor structure for increased magnetic strength.
  • 12mm T-yoke & top plate improve low-frequency dynamics.
  • Vented T-yoke & frame reduce voice-coil heat buildup.
  • Nonmagnetic, nonresonant die-cast aluminum frame.
Check Stock

Power Acoustik MOFOS-12D2 12" Dual 2 Ω 1200W RMS Subwoofer, Black

  • 2.5" Dual 4-Ohm 4-Layer Voice Coil, Royal Blue Finish with Diamond Cut Accents, Die Cast Aluminum Voice Coil Heatsink.
  • Non-Pressed Pulp Cone, Polyether Foam Surround. RMS power handling: 1,500, efficiency (1w/1m): 85.40.
  • Nickel Plated 8ga Compression Wire Terminals, Dual Poly-Cotton Spiders, Die-Cast Aluminum Frame, Vented Pole Piece.
Check Stock

KICKER 2 43CVT102 COMPVT 10" 1600w Shallow Car Subwoofers+Mono Amplifier+Amp Kit

  • ...Audio Subwoofers Totaling 1600 Watt (1) Rockville KRYPTON-M2 3000w Peak/750w RMS Mono 1 Ohm Car Amplifier Amp+Remote (1) Rockville RWK41 4 Gauge Complete Car Amp Wiring Installation Wire Kit with RCA's.
  • Features/Specifications: Kicker 43CVT102 10" 800 Watt Single Voice Coil 2-Ohm Car Audio Subwoofer Power Handling : Peak : 800 watts RMS : 400 watts Size : 10" Shallow-mount subwoofer with true high-performance This sub is slim enough to be mounted in virtually any vehicle Delivers extreme bass with minimum depth Four-layer voice coil for max power handling Dark gray modified-spoke cone with bracing for clear bass response Ventless solid-pole design for direct mount to enclosure rear wall Steel “clearance” adapter plate replaces part of enclosure wall depth to further lessen depth Injection molded SoloKon cone Ribbed Santoprene surround High-temp coil wire Slender,.
  • strong steel basket with coil-cooling perimeter venting, Durable Spiralead tinsel leads Stitched surround for enhanced cone-to-surround strength Tough double-stitched surround Special spring-loaded binding posts for minimizing depth UniPlate system redirects heat away from motor str....
Check Stock

BassBox 6 Pro User Manual

  • 6″ 4-Ohm Car Subwoofer. Peak Power Handling: 300 Watts. CEA Rated RMS Power Handling: 30 Watts 1″ High-Temperature CCAW Voice Coils Kapton Paper Wound with 100% Copper Wire. Voice coil with High-Quality Precision copper available in Kapton/ Aluminum heat sink, highly insulated with Methanol. Specially designed Woofer Cone for bass effect.
  • 8oz High-Quality Magnet 4-Ohm Cast Steel Body with Pre-treated Woofer Frame which gives a beautiful finish and makes this Car Subwoofer Very Efficient. Kapton/Aluminum Heat sinks for proper Heat Dissipation and voltage Sustain Ability. This 6 Inch Subwoofer comprises of Foam Edge Cone/PP prepared for a crisp and soothing sound..
  • Cones Used for making this car audio subwoofers are Ultra-Stiff. They are thicker and stronger than other subs on the market making our woofers able to handle more power. Thick Foam Surround Provides Incredible Sound Quality With Minimal Distortion. Highly flexible Spider/Damper used for accurate cone movement..
  • Foam Edge Cone/PP Reinforcement Ensures Long Life. Impedance: 4-Ohm Voice Coils. Low Carbon Forged Iron T-yoke and washers with approved Y-30 Ferrite Magnet Enhances Heat Dissipation in subs. Advanced Air Flow Cooling System..
  • 5 Core uses highly adhesive in the assembly of the Speake....
Check Stock

Precision Port 2' Flared Speaker Cabinet Port Tube Kit

  • ...utput amplifier & RCA/speaker line input.
  • RUBBER EDGE SUSPENSION: The high-performance car woofer speaker has a specially treated black rubber edge suspension that completes your woofer enclosure system. Total size measures 10.4” H x 20” W x 9.6” D. Also features blue LED light behind the grill.
  • 1.5” ALUMINUM VOICE COIL: This car speaker has a 1.5” aluminum voice coil with a 4-ohm impedance rating that compensates the undersized wire found in most cars. Ultimately reduces distortion so you can enjoy a crisp & clear sound.
  • BLUE POLYPROPYLENE CONE: Pyle follows the standard size for most car stereo systems & created this 8" high power 4-ohm subwoofer w/ blue polypropylene cone perfect for new speaker construction, replacing worn or blown speakers.
  • 35Hz - 800Hz FREQUENCY: The 1.5” aluminum voice coil provides the punch, while the bass reflex vent adds even more sub-bass, ultimately achieving a frequency response of 35 Hz to 800 Hz. It is also super easy to install to your vehicle's sound system.
  • One 8'' High Power 4 Ohm Subwoofer - 1.5'' Aluminum Voice Coil.
  • Built-In High Output Amplifier - Bass Reflex Vent for Added Sub-Bass Response.
  • Blue LED Light Behind The Grill - 250 Watts Max Power Handling.
  • Blue Polypropylene Cone - RCA/Speaker Line Input.
Check Stock

DS18 EXL-XX15.2DHE 15” High Excursion Car Subwoofer 4000 Watts Dual Voice Coil 2+2 Ohms (1 Speaker)

  • POWERFUL BASS YOU CAN COUNT ON – EXL-XX15.2DHE delivers impressive 4000W Max Power with 2000W RMS at Dual 2+2 Ohm, once you hear it you’ll finally realize what big, rich bass sounds like..
  • DUAL VOICE COIL (DVC) – Provides multiple options and flexibility to wire Parallel, Series, or Independent. While typical subwoofers have a single voice coil, the EXL.
  • UNMATCHED ENGINEERING – The EXL series of subwoofers come with Three-inch black aluminum voice coil for high power handling and great efficiency to ensure top quality..
  • High Excursion surround for a very high amount of xmax..
  • NEVER STOP INNOVATING ATTITUDE – DS18 stands out from other brands with our progressive designs and unwavering commitment to delivering the most technologically up-to-date products on the market.
Check Stock

Power Acoustik MOFO-154X MOFO 15-Inch Dual 4-Ohm VC 3000 Watt Pro Subwoofer, Standard Packaging

  • 2.5" Dual 4-Ohm 4-Layer Voice Coil, Royal Blue Finish with Diamond Cut Accents, Die Cast Aluminum Voice Coil Heatsink.
  • Non-Pressed Pulp Cone, Polyether Foam Surround.
  • Nickel Plated 8ga Compression Wire Terminals, Dual Poly-Cotton Spiders, Die-Cast Aluminum Frame, Vented Pole Piece.
Check Stock

Polk Audio AA3154-A MM1540 15-Inch Subwoofer

  • New Polymer Woofer Cones and Butyl Rubber Surrounds will not break down over time and will survive the rigors of harsh automotive environments.
  • High Temperature Copper Voice Coil (51 millimeter) and Polyamide Former withstands the most rigorous use while maintaining extremely low distortion for bass punch and output.
  • Available in Single and Dual Voice Coil Configurations allowing flexible wiring options.
  • Nickel Plated Heavy Duty Input Terminals accommodate speaker wire up to 8 AWG or twisted pairs of 12 AWG.
  • Available Matching Grilles complement the wheel spoke design.
Check Stock