Top Fire Safe Ball Valve

Motorized Ball Valve- 1/4 Stainless Steel Ball Valve with Full Port 9-24V DC and 2 Wire Reverse Polarity by U.S Solid

  • SAFE AND RELIABLE- Made of SS304 steel, with NSF certification, this ball valve is safe for drinking water.
  • NPT THREADING- 1/4” Stainless steel threading, manufactured and measured according to National Pipe Thread standards.
  • 9V-24V DC- Works effectively over entire voltage range.
  • Limit switch cuts off power after valve is fully open....
  • 2 WIRE REVERSE POLARITY SETUP- Simple two wire connection, valve completely de-energizes after opening or closing.
  • ALTERNATIVE TO SOLENOID VALVES- Automatically cuts off power once fully open or fully closed.
  • This reduces likelihood of overheating, making it a....
Check Stock

AOMAG 3/8" Electric Solenoid Valve 12V DC, VITON Gasket, Air, Gas, Fuel Normally Closed

  • VITON GASKET- Viton is a space age material that is very chemically inert. As such, it is commonly used with gasoline, kerosine and other organic solvents. Some companies sell solenoid valves with NBR gasket and advertise gasoline use. DO NOT USE NBR gasket for gasoline (it will corrode the gasket and can cause serious gasoline leak and accident or fire). If you intend on using a valve for gasoline, use only VITON gasket..
  • ISO/OEM/ODM/CE and1 year warranty. DIRECT ACTING and Normally Closed Valve (N.C.) - The solenoid’s magnetic field with directly moves the plunger and close the orifice for any fluid or gas flow. Only opens while energized..
  • -NEW- Re-engineered low power coil with up to 50% less heat generation. The valve starts as 19W and as it heat up to operating temperature power reduces to approx. 10-13W..
  • 1/4" NPT (USA National Pipe Thread). Commonly used standard pipe thread in US...
  • PLEASE NOTE: This valve is NOT a continuous duty valve and should NOT be in continuous use for more than 6 hours in a single cycle.
  • to do so will shorten the life of the valve and may ca....
Check Stock

Motorized Ball Valve- 1/2\ Brass Ball Valve with Full Port, 9-24V AC/DC and 2 Wire Auto Return Setup by U.S. Solid

  • SAFE AND RELIABLE- Made of durable brass, this valve is safe and reliable.
  • The estimated life expectancy of 80,000 to 100,000 cycles means it is built to last.
  • NPT THREADING-½” quality brass thread, manufactured and measured according to National Pipe Thread standards.
  • This electrical ball valve is full port, meaning the bore in the ball is a full1/2”.
  • This minimizes pressure loss through the valve.
  • 9V-24V AC/DC- Works effectively over entire voltage range.
  • Limit switch minimizes power after valve is fully open.
  • Ideal for projects where an automatic return is necessary.
  • 2 WIRE AUTOMATIC RETURN SETUP- Simple two wire connection, valve largely de-energizes after opening.
  • Returns to fully closed if power is removed.
  • ALTERNATIVE TO SOLENOID VALVES- Automatically cuts off power once fully open or fully closed.
  • This reduces likelihood of overheating, making it a great alternative to solenoid valves for projects where a valve needs to be open for an extended period of time.
Check Stock

Motorized Ball Valve- 1 Stainless Steel Electrical Ball Valve with Full Port 9-24V DC and 5 Wire Setup can be used with Indicator Lights [Indicate Open or Closed Position] by U.S Solid

  • SAFE AND RELIABLE- Made of SS304 steel, with NSF certification, this ball valve is safe for drinking water.
  • NPT THREADING-1" Stainless steel threading, manufactured and measured according to National Pipe Thread standards.
  • 9V-24V DC- Works effectively over entire voltage range.
  • Limit switch minimizes power after valve is fully....
  • 5 WIRE INDICATOR LIGHTS SETUP- 5 Wire setup allows for easy operation and indicators for when the valve is fully open or fully closed.
  • ALTERNATIVE TO SOLENOID VALVES- Automatically reduces power once fully open or fully closed.
  • This reduces likelihood of overheating, making it a great....
Check Stock

Walden Fire Pit Stoker Poker XL 46\ - Stick-One-Way Airflow Valve-Blow Through Fire Poker, Extra Long 46\ - High Carbon - Outdoor Campfire Tools and Accessories Fire-Poker for Fire Pit

  • ...mp gasoline on the wood to get it going, but Stoker Poker is really very effective and safe. If you see that the fire is going out, you can easily re-arrange the logs from 4 feet away and simply blow through the Stoker Poker to re-ignite the flames..
  • UNIQUE DESIGN: The Walden Stoker Poker has an industry-leading air valve that allows users to stoke the fire without inhaling smoke. Simply put the fire poker tip into the base of the fire, blow air into the handle to STOKE your fire and keep your bonfire roaring. PATENT PENDING.
  • SAFE, EASY & MULTI-FUNCTIONAL: A must-have addition to your CAMPFIRE TOOLS, or fireplace and firepit accessories. No more getting smoke in your eyes. No more having to scramble around on the ground getting your knees dirty trying to blow on that perfect spot on the fire. Totally safe for kids as well, with a one-way blow valve, there’s no chance of inhaling smoke. Great opportunity for kids to “help” mommy and daddy get the fire going!.
  • QUALITY: Beautiful wood handle that is comfortable and easy to handle for hands of all sizes. Stainless steel mouthpiece that is easy to clean between users because other people will definitely want to try this out. High carbon steel material makes it both light weight and strong enough t....
Check Stock

Motorized Ball Valve- 1/2 Stainless Steel Electrical Ball Valve with Full Port 9-24V AC/DC and 3 Wire Setup by U.S Solid

  • SAFE AND RELIABLE- The valve body is made of SS304 steel, with NSF certification, this ball valve is safe for drinking water.
  • NPT THREADING- ½" Stainless steel threading, manufactured and measured according to National Pipe Thread standards.
  • 9V-24V AC/DC- Works effectively over entire voltage range.
  • No power expended once fully open or fully closed.
  • 3 WIRE, 2 POINT CONTROL SETUP- Simple three wire connection, with two points of control.
  • ALTERNATIVE TO SOLENOID VALVES- Automatically cuts off power once fully open or fully closed.
  • This reduces likelihood of overheating, making it a....
Check Stock

Motorized Ball Valve- 1/2\ Brass Electrical Ball Valve with Full Port, 9-24V AC/DC and 3 Wire Setup by U.S. Solid

  • SAFE AND RELIABLE- Made of durable brass, this valve is safe and reliable.
  • The estimated life expectancy of 80,000 to 100,000 cycles means it is built to last.
  • NPT THREADING-½” quality brass thread, manufactured and measured according to National Pipe Thread standards.
  • This electrical ball valve is full port, meaning the bore in the ball is a full 1/2”.
  • This minimizes pressure loss through the valve.
  • 9V-24V AC/DC- Works effectively over entire voltage range.
  • No power expended once fully open or fully closed.
  • 3 WIRE, 2 POINT CONTROL SETUP- Simple three wire connection, with two points of control.
  • ALTERNATIVE TO SOLENOID VALVES- Automatically cuts off power once fully open or fully closed.
  • This reduces likelihood of overheating, making it a great alternative to solenoid valves for projects where a valve needs to be open for an extended period of time.
Check Stock

1/4\ NPT Brass Electric Solenoid Valve 12V DC Normally Closed VITON (Standard USA Pipe Thread). Solid Brass, Direct Acting, Viton Gasket Solenoid Valve by AOMAG

  • VITON GASKET- Viton is a space age material that is very chemically inert. As such, it is commonly used with gasoline, kerosine and other organic solvents. Some companies sell solenoid valves with NBR gasket and advertise gasoline use. DO NOT USE NBR gasket for gasoline (it will corrode the gasket and can cause serious gasoline leak and accident or fire). If you intend on using a valve for gasoline, use only VITON gasket..
  • ISO/OEM/ODM/CE and1 year warranty. DIRECT ACTING and Normally Closed Valve (N.C.) - The solenoid’s magnetic field with directly moves the plunger and close the orifice for any fluid or gas flow. Only opens while energized..
  • -NEW- Re-engineered low power coil with up to 50% less heat generation. The valve starts as 19W and as it heat up to operating temperature power reduces to approx. 10-13W..
  • 1/4" NPT (USA National Pipe Thread). Commonly used standard pipe thread in US...
  • PLEASE NOTE: This valve is NOT a continuous duty valve and should NOT be in continuous use for more than 6 hours in a single cycle.
  • to do so will shorten the life of the valve and may cause the core of the valve to burn out. If you need a continuous duty valve for your project please search for our AOMAG Motorized Ball Valves..
Check Stock

PVC COMPACT BALL VALVE 4" - Socket - Sanipro

  • EZ-FLO SCHEDULE 40 PVC BALL VALVE: This EZ-FLO ball valve is suitable for use as an inline valve for connecting two pipes going in the same direction.
  • equipped with a 3/4 inch slip connection on each end.
  • DURABLE: This schedule 40 PVC ball valve is made of heavy-duty CPVC that protects against corrosion and provides strength and durability.
  • EASY TO USE: This PVC ball valve is equipped with a quarter-turn red plastic handle for an easy-to-control water flow.
  • SPECS: This valve can withstand a working pressure of 150 PSI and a maximum temperature of 140 degrees F.
  • SAFETY: This ball valve complies with lead-free guidelines for potable water applications.
Check Stock

Alomejor CGA347 Paintball Fill Station Kit PCP SCBA Fill Station Charging Adapter with Hand Tight Paintball Refill Adapter

  • SMOOTH DESIGN: This paintball fill station Knob type exhaust valve, the air outlet is very smooth, which is safe to use and premium for long service time..
  • 45MM DIAMETER: The 45mm diameter glycerine filling gauge, reading 0~ 40mpa, 0~6000 PSI, indicates that it is very suitable for outdoor use..
  • UNIQUE DESIGN: 6000psi fill station designed for filling a paintball HPA tank, or an air rifle from a SCBA (fire fighting) tank..
  • APPLY FOR: Easy to install and use. The paintball charging adapter is connected to the SCBA (fire fighting) tank using tight CGA347 nuts and threaded joints..
Check Stock

DERNORD Stainless Steel Ball Valve 1PC Type 0.25\ NPT Standard Port for Water, Oil, and Gas (1/4 Inch Ball Valve)

  • Serviceable Stainless Steel Ball Valve - Can be taken apart via threads, Threaded Connector Type Female to Female 1/4 Inch NPT.
  • Stainless Steel 1PC Ball Valve Handle: Handle with blue vinyl insulation.
  • Body & Ball Type:304 Stainless Steel.Temp Range:-60 F to 450 F.
  • Stainless Steel 1PC Ball Valve Nominal Working Pressure:1000 WOG:Max 1000 psi for Water, Oil, Gas,.
  • NOTE: DERNORD 1PC Type Ball Valve Standard Port is not full port type, the size we marked is only the thread size this ball valve fits. If you need full-bore ball valve, please check the related products in Product Description..
Check Stock

Low Pressure LPG Propane Gas Fireplace Fire Pit Flame Failure Safety Control Valve Kit, with Thermocouple Knob Switch with 5/8''-18UNF Flare Inlet & Outlet Replacement for Gas Grill Heater Fire Pit

  • WIDE COMPATIBILITY --- The propane lpg gas fire pit control safety valve kit is suitable for gas grill, heater, fire pit, fireplace if same connections. IT'S LOW PRESSURE PROPANE ONLY..
  • EASY INSTALLATION --- This low pressure LPG propane gas fireplace fire pit flame failure safety control valve kit is easy to install, install vertically at the opening of the device container..
  • PREMIUM QUALITY --- The fire pit gas control valve kit are made of high quality brass material with heavy-duty construction for durable use..
  • DEMENSION --- Flame failure valve with inlet and outlet with Flare thread 5/8’’-18UNF, 750mm thermocouple with M8*1 threaded head..
  • 1 YEAR WARRANTY --- This gas fire pit control valve replacement parts complete with 1-Year limited warranty, should be there any question, please feel free to contact us..
Check Stock