Top Firmware Testing

Official Creality New Upgrade Motherboard Silent Mainboard V4.2.7 for Ender 3 Customized and Non-Standard Matching,Ender 3 Silent Mother Board

  • Creality new release silent motherboard V4.2.7 ，32bit, compatible with Ender 3..
  • Super quiet by TMC2225 drivers , Bootloader installed,copy the firmware file to a formated SD card with no other files in it. Turn off the printer and unplug the power cord. Insert the SD card & power cord, and turn on the printer. Wait 10s to complete the firmware updating process., easier to flash the firmware..
  • Thermal runaway protection is enabled. The Board is Optimized by Circuit, effectively solve Heating Problem..
  • Firmware comes pre-installed, pre-configured for the Ender 3, makes it totally plug & play..
  • This silent mainboard preinstalls the Ender-3 firmware. If you want to install it in your Ender 3 Pro/Ender3 v2/ Ender-5, need to flash the Ender 3 Pro/Ender 3 v2/Ender5 firmware..
Check Stock

Grundens 70043 Shore Leave 55 L Waterproof Duffel Bag, Black - One Size

  • Speed on PS5: Under the operating environment of the PS5, the sequential read speed of both 1TB and 2TB models measured at 6100MB/s * To be able to work on PS5, PS5 firmware 21.02-04.00.00.42 or higher is required.
  • Speed on PC/Laptop: Sequential R/W up to 7400/6800MB/s *Test performed in ADATA internal lab, actual performance varies by paired system and testing environment. When paired with PCie 3.0 port, max R/W will be limited to 3400/3000MB/s.
  • Form factor: M.2 2280 *This drive will only work with M/B that supports PCIe 4 (PCIe 3 backward compatible). The drive is designed to work with direct installation onto M/B, it may not work with external enclosure.
  • Backed by a 5-year limited manufacturer warranty.
Check Stock

Hasbro Family Game Night 4: The Game Show Edition (PS3)

  • Plug and play. Multi-console support: Compatible with PS3/PS4/PC.
  • No timeout issue: No annoying 8-minute timeout issue on PS4. Turbo function support.
  • Upgrade firmware via USB. SOCD cleaner support.
  • PS4 controller touchpad click emulation: LS, RS, DP Emulate.
  • XInput support. NOTE: NOTE: PS4 firmware update to 3.11 disables the Brook Super Converter after 8 minutes. Brook has developed a firmware update to address this. Please make certain to update your device firmware before using..
Check Stock

Official Creality 3D Printer Ender 3 Upgraded Silent Board Motherboard V4.2.7 with TMC2225 Driver Marlin 2.0.1 for Ender 3/ Ender 3 V2/ Ender 3 Pro/Ender 3 Max/Ender 5

  • 【Super Quiet】The silent mainboard can reduce stepper motor noise. TMC ultra-quiet motor drive chip, ultra-quiet system design, so that the machine is always running at low decibels (.
  • 【Widely Application】Compatible with Creality Ender 3, Ender 3 Pro, Ender 3 V2, Ender 3 MAX, Ender 5,Ender 5 Pro 3D printer. PLEASE NOTICE: It only plug and play for Ender-3. If you want to install it on other machine, please flash the relative machine V4.2.7 firmware. You can download firmware from official website..
  • 【Driver】TMC2225 driver & V0.0.6 firmware from Creality ( based on Marlin 2.0.1) for V4.2.7 board. The bootloader has been preinstalled..
  • 【Update Firmware Method】Please copy the correct firmware file to a formated SD card with no other files in it. Turn off the printer and unplug the power cord. Insert the SD card & power cord, and turn on the printer. Wait 10s to complete the firmware updating process..
  • 【After Sale Service】Any issues or questions about our product please feel free to contact us at any time. We have professional technical Team to provide technical supports for you within 24 hours..
Check Stock

Brook PC PS3 PS4 Fight Board Fighting DIY Kit Turbo Rapid Fire Function

  • Plug and play. Multi-console support: Compatible with PS3/PS4/PC.
  • No timeout issue: No annoying 8-minute timeout issue on PS4. Turbo function support.
  • Upgrade firmware via USB. SOCD cleaner support.
  • PS4 controller touchpad click emulation: LS, RS, DP Emulate.
  • XInput support. NOTE: NOTE: PS4 firmware update to 3.11 disables the Brook Super Converter after 8 minutes. Brook has developed a firmware update to address this. Please make certain to update your device firmware before using..
Check Stock

Sniper Elite III - PlayStation 3 Standard Edition

  • Fast, accurate and stable. Designed by pro FPS gamers.
  • Exquisite UI design. Super easy to use. Online storage..
  • No original controller need for revification.Please check the compatibility of the product at the brook official web site before you place the order because NOT all the brand or models of the controllers / wheel / Joystick are compatible with the brook adapter..
  • Hot swapping. Firmware upgradable. NOTE: The latest PS4 firmware update disables the Brook Super Converter after 8 minutes. Brook has developed a firmware update to address this. Please make certain to update your device firmware before using. With Gam3Gear Keychain..
  • BrookSniper App: available in App Store/Google Play. Exquisite UI design. Super easy to use. Real-time applying with blue-tooth devices. Optimized config for popular games. Online storage..
Check Stock

Creality Ender 3 V2 Upgrades V4.2.7 Silent Board 32 Bit Silent Mainboard with TMC2225 Drivers Compatible for Creality Ender 3 Ender 3 Pro Ender 5 Ender 5 Pro 3D Printer

  • NOTE: If you want to install this V4.2.7 silent motherboard on the printer, you need to flash the motherboard firmware to work properly. You can....
  • Firmware Pre-Installed Only for Ender3 V2 - Marlin 2.0.1 and firmware(not BLTouch version) for Ender-3 V2 comes pre-installed on this board. If your....
  • Update the Motherboard Firmware - Please copy the firmware file to a formated SD card with no other files in it. Turn off the printer and unplug the....
  • Noiseless - TMC ultra-slience chip, effectively eliminates noise. Low-decibel operation keeps the motherboard running. Using high-quality MOS tube,....
  • High Performance - Equipped with STMicroelectronics 32-bit MCU, which brings a new experience. Connect to temperature sensor via smart fanEnable....
Check Stock

Powerextra 2-Pack 11.1V 5200 mAh LiPo Intelligent Battery Repleacement for DJI Phantom 2, Phantom 2 Vision and Phantom 2 Vision Plus

  • Only Compatible with DJI Phantom 2, Phantom 2 Vision, Phantom 2 Vision+ and Phantom 2 charger. All Powerextra battery packs comply with RoHS and CE security testing standards..
  • Upgraded for latest Firmware. With 5,200 mAh of power you can expect flights of 20-25 minutes on a single charge..
  • With built-in 4 LED indicator lights you'll always know how much power is remaining at the touch of a button..
  • Advanced charging and fail-safe circuitry built-in, Protection against overcharge, short circuit and over discharge..
  • Notes: Before using battery for more flights, please charge the battery fully and try one flight for checking, which will make the battery better fit for DJI phantom 2 drones..
Check Stock

Jabra Evolve 65 Ms Mono

  • Jabra Headset Made For Voice & Music, Optimized for MS Lync, Teams with Bluetooth connectivity. Upgrade and update software firmware using the Jabra Direct app on you PC or Mac.
Check Stock

952 952 XL 952-XL - ECHALLENGE Remanufactured Ink Cartridges Replacement for HP 952 952XL B/C/M/Y Compatible with OfficeJet Pro 8710 8720 7740 8715 8720 8725 8730 Printer (4 Pack)

  • With Upgraded Chip: ECHALLENGE Remanufactured ink for HP 952xl ink cartridges combo pack with the latest upgraded chips to ensure high compatibility with all firmware version printers.
  • ECHALLENGE Remanufactured 952XL ink cartridge undergoes a strict quality testing procedure to ensure quality and compatibility with your printer..
  • Page Yield: Black 2000 pages + Cyan 1600 pages + Magenta 1600 pages + Yellow 1600 pages(at 5% coverage of A4 paper).
  • Printer Compatibility:HP OfficeJet 8702 OfficeJet Pro 7720 7730 7740 8200 8210 8216 8218 8700 8710 8714 8715 8716 8717 8718 8719 8720 8724 8725 8726 8727 8728 8730 8732M 8734 8735 8736 8740 8743 8744 8745 8746 8747 printers.
  • Echallenge ink provides clear and vibrant printing effect, which gives you a good visual feast..
Check Stock

ChiTu L V3 Control Board for Creality LD-002R/Anycubic Photon with 32-bit ChiTu Motherboard 3D Printer Integrated Controller Only Board sharp04 firmware

  • ✔ Meaning of Material Options: FIRMWARE LCD PANEL(6.08 mono firmware/5.5 mono firmware/sharp04 firmware), you need to update the corresponding....
  • ✔ Better Integration: ChiTu motherboards have better integration and are more convenient and simple to use..
  • ✔ Offline System + 2K Resolution: Making printing more efficient. STM32fF407 + FPGA, completely independent design. Support image HD outpot..
  • ✔ Perfect with CHITUBOX: A free-processing software with powerful tools and the biggest user volume for resin printer..
  • ✔ Customer Support: Please note that this product usually takes 7-12 days to be delivered by free delivery. We provide 24-hour customer service,your....
Check Stock

IoT-Turbo Data SIM Card 3-in-1 Kit | Nationwide 4G LTE Coverage Based on AT&T Backbone Network |No Contract or Activation Fee Compatible with IoT Devices, GPS Tracker, 4G Hunting Camera, 4G LTE Router

  • Plug and play. Multi-console support: Compatible with PS3/PS4/PC.
  • No timeout issue: No annoying 8-minute timeout issue on PS4. Turbo function support.
  • Upgrade firmware via USB. SOCD cleaner support.
  • PS4 controller touchpad click emulation: LS, RS, DP Emulate.
  • XInput support. NOTE: NOTE: PS4 firmware update to 3.11 disables the Brook Super Converter after 8 minutes. Brook has developed a firmware update to address this. Please make certain to update your device firmware before using..
Check Stock