Top Fittings End

DP Dynamic Power Recoil Air Hose 25-ft.x 1/4-inn Polyurethane Hose 200 PSI

  • 1/4-In.NPT Solid Brass Fittings Including Rigid Male End and Swivel Female End to Reduce Hose Twist.
  • Extreme Weather Flexibility: -30 F to 180 F.
  • Fittings are Filed Repairable For Easy Maintenance.
Check Stock

Spears 447 Series PVC Pipe Fitting, Cap, Schedule 40, 2' Socket

  • 【Apply To】Cap for closing the end of 2" pipe or fitting, which outside diameter of 2.374". Socket end for connecting to unthreaded pipes or fittings..
  • 【Material】6 pcs Heavy Duty 2 Inch PVC Pipe End Cap Fitting Made of high-quality PVC, high-impact strength, resistant to frost and corrosion, long service life..
  • 【Easy Installation】They are non-toxic, lightweight and easy to install. Installation requires the use of primer and solvent cement..
  • 【Wide Application】Furniture-Grade Parts, suitable for indoor and outdoor use.
  • Pressure Fittings are used in irrigation, underground sprinkler systems, swim pools, outdoor applications and cold water supply lines, etc..
  • 【Use with Confidence】Meets ASTM D2466 and D1784 standards, comply with NSF requirements..
Check Stock

DCT Dust Collector Accessories Kit – 1.25in x 10ft Vacuum Hose, Dust Collection Fittings, and Vacuum Reducer

  • ENHANCE DUST COLLECTOR EFFICIENCY: Create a vacuum system with the DCT | Woodworking Dust Collection 1.25” x 10’ Dust Hose with Fittings & Reducers and use to collect shavings and dust from your woodworking power tools.
  • Use as the last stage from your dust collector to your tool with 2.5-inch (6.4cm) ports with 1.5-inch (3.8cm) accessories.
  • Shopvac hose pairs with dust extractors and dust collection systems (not included) to prevent dust buildup.
  • PERFECT SIZE: 1.25-inch (3.2cm) outside diameter (OD) and 1-inch (2.5cm) inside diameter (ID) with a 1.2-inch (3cm) OD and 1-inch (2.5cm) ID small end fitting, 1.75-inch (4.4cm) OD and 1.5-inch (3.8cm) ID large end fitting, and 2.5” x 1.5” inch (6.4cm x 3.8cm) reducers to fit your attachments (measure application to ensure fitment).
  • 10-foot (3m) long vacuum hose for ample room to reach your equipment.
  • Small diameter for flexibility and maneuverability.
  • LET THE MAGIC HAPPEN: Included fittings screw into each end of the shop vacuum hose and fit snugly with the fittings on your existing power tools.
  • The small end of the dust collection pipe is ideal for connecting a random orbital sander, palm sander, biscuit joiner, or any other power tool with small dust collect....
Check Stock

LUTER 3 Pieces Teflon Tube PTFE White Tubing 1m + 3 Pieces Quick Fitting for PC4-M6 + 3 Pieces Straight Pneumatic Fitting Push for PC4-M10 to Connect for 3D Printer 1.75mm Filament

  • PTFE Blue Tubing - the blue color teflon tube outside diameter 4mm, inside diameter 2mm, density 2.15-2.20g/cm3.
  • PC4-M6 fittings - thread M6/3mm, inner diameter(blue end) 4mm, fit for the tube whose outer diameter is 4mm.
  • PC4-M10 fittings - thread M10/6mm, inner diameter(black end) 4mm, fit for the tube whose outer diameter is 4mm.
  • Premium Material - the teflon tube made of durable PTFE (Poly Tetra Fluoro Ethylene) material, PC4-M6 Fittings is made of Copper.
  • Attention - small 3D printer accessories, please keep away from children.
Check Stock

RTPOWER Fits Bestway，Coleman SaluSpa, Lay-Z-spa ，A and B/C Connector Seals Gaskets(1 A + 2 B/C)

  • ⭐Fits:Springs, Miami, SaluSpa, Palm Springs, Hawaii, Helsinki, Honolulu, Milan, St. Moritz, Paris, Cancun, Havana, Cali, AirJet, Lay-Z-Spa, Tahiti, Compatible with model numbers 54xxx, 90xxx, 600xx, and 1380x..
  • ⭐Stop waterways from leaking: these spa gaskets work between the unions and pump wet end fittings or heaters and union fittings to stop the waterways from leaking, which can deal with the leaking trouble while helping you save water.
  • ⭐Soft and unbreakable: the heater union gaskets are made of silicone, which is soft and unbreakable, they won't be destroyed during the installation, the quality material allows them to serve you for a long time and give you a nice using experience.
  • ⭐Instructions for installation and removal: the hot tub heater gaskets are convenient and time-saving for you to use, which go on unions between the union and pump wet end fittings or heaters and union fittings, the whole process won't take much effort so that you can even do the job at home by yourself.
Check Stock

SUNOOM Boat Bimini Top Eye End 7/8 Inch,Black Nylon Cover Cap Eye End,Marine Bimini Top Fittings,Awning Hardware,Accessories,Used for Kayak,Canoe,Marine Boat,Pack of 4

  • Bimini top fittings cover cap eye end made of black nylon,It's durable and strong materals for tough saltwater environment..
  • Bimini fittings top cover cap eye end fits for 7/8'' OD round tube,fits most standard bimini tops..
  • Excellent replacement hardware for bimini tops found on most pontoon boats,easy to install..
  • Bimini top eye end used for marine boat bimini top canopy fitting..
  • Nylon eye end is very lightweight,solid,strong,Great accessories for kayak,canoe,marine boat,fishing dinghy,raft and so on..
Check Stock

Sierra International 18-5225 Marine Spark Plug Wire Kit for Select Mercury Outboard Engines

  • Marine Spark Plug Wire Kit Includes: (1) 25 Foot Roll of Ignition Wire and a Large Assortment of Three Different End Fittings.
  • Mypalon Ignition Wire is 25 Feet in Length, 7mm in Diameter and Contains a Copper Metallic Core.
  • The Large Assortment of End Fittings comes in Three Different Sizes to fit Outboard Motors.
  • Replaces: Mercury 84-813706A26, 84-99215A26, 84-93475A26, 84-90816A26, 84-93212A1.
  • All Sierra parts qualify for and are covered under Sierra's Industry Leading Customer Satisfaction Warranty.
Check Stock

Lisle 22920 8 mm Low Profile Jiffy-Tite Disconnect Tool

  • Disconnects quick connect push-in connectors found on heavy-duty truck air systems and more.
  • Smallest size also works on automatic adjusting air suspension systems for automobiles.
  • Disconnects air systems on brakes, suspension, steering, engine, transmission and other auxiliary equipment.
  • Also disconnects other quick connect push-in fittings, including: flow control valves, check valves, shuttle valves, quick exhaust valves and other function control fittings in compressed air systems.
  • Each tool is double-ended to disconnect air lines even in hard-to-reach areas, angled end allows maximum leverage, smaller end fits in tight spots.
  • Set comes with five popular sizes: 1/8"-5/32.
Check Stock

POWERTEC 70207 4 Inch Flexible Dust Collection Hose and Fittings Kit

  • INCLUDES: (1) Flexible Dust Collection Hose 4” x 12” | (2) Screw End Fittings, (1) Oval Tapered Nozzle and (1) Rectangular Nozzle.
  • FUNCTION: A complete dust collector hose kit that possesses a versatile assortment of fittings intended to promote project flexibility and optimal airflow to your dust collection system.
  • HARD TO REACH: A flexible hose is designed with a 4” diameter for component compatibility, and a 12” length that can expand up to an impressive 36 inches for out-of-reach applications.
  • FITTINGS: Rectangular and oval tapered nozzles provide optimum adaptability with table saws, sanders, drill presses, routers, and other woodworking equipment.
  • QUALITY: The hose is made out of polypropylene (PP), with both pliable to rigid profiles – while the fittings are all constructed out of ABS plastic for heavy duty use and long-term durability.
Check Stock

Legines Brass Pipe Fitting Hex Bushing 3/8 NPT Male to 1/4 NPT Female 1200psi 2pcs

  • Hex bushing for connecting two pipes with different diameters.
  • 3/8" Male NPT threads on one end and 1/4" female NPT threads on the other for connecting pipes with different ends.
  • Legines pipe fittings are made of CA360 or CA377 brass, not ordinary copper alloy, and meet SAE standard, have dryseal threads, forgings & extruded..
  • Operating pressure of our fittings is up to 1200psi, more higher than other general fittings. Temperatures range from -53 to 121 degrees C (-65 to 250....
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Check Stock

Eastman 48036 Flexible Faucet Connector Supply Line, Braided Stainless Steel, Delta Style, 3/8-inch Outside Diameter (OD) Male Compression Outlet X 3/8\ Compression Inlet, 16-Inch Length

  • EZ-Fluid Plumbing Stainless Steel Braided Faucet Extension Line, Fits 3/8" Male Comp. End Fittings For Faucet, Toilet, Dishwasher, Water Filter System And More.
  • cUPC, NSF Certified Lead Free faucet supply 3/8 to 3/8 Extension.
  • Faucet 3/8" Female Compression X 3/8" Female Compression Faucet Extension Line.
  • High Burst Strength, Extra-Long Stainless Steel, No-Burst Ferrules With Double Radial Crimps For Extra Security.
  • 3/8 female compression hose x 3/8 female Comp water connector, The 3/8 female Compression End Fits 3/8" Male Comp. End Fittings.
Check Stock

BCZAMD 3D Printer Parts 1 Meter PTFE Tflon Tube for 1.75mm Filament ID 1.9mm OD 4mm Tubing for TL-Feeder Hotend Reprap Rostock Extruder Black

  • PTFE Teflon Tubing: Outside diameter 4mm, inside diameter 2mm.
  • Teflon tubes are made of premium PTFE material, unique....
  • Premium PC4-M6 Fittings:thread M6, inner diameter(blue end) 4mm, suitable for the tube whose outer diameter is 4mm.PC4-M6 fittings are made of copper....
  • Upgraded PC4-01 Fittings:thread PT1/8, inner diameter(black end) 4mm, suitable for the tube whose outer diameter is 4mm,perfect for E3D V6....
  • Easy to install and Quick to fix: Press and hold the blue or black part of the quick fitting and pull out the tube. Provide turn 360°freely and....
  • Compatibility: Fit for all 1.75mm PLA ABS 3D printer securely with no burrs..
Check Stock