Top Fittings Included

US Cargo Control Enclosed Utility Trailer E Track Starter Kit, Convenient E Track Kit Includes E Track Rails, Cargo Straps, Fittings, End Caps and Storage Bag, Easily Secure Cargo in Your Trailer

  • CONVENIENT TRAILER E TRACK KIT - This kit includes everything you need to get you started with your E Track System! The kit includes E Track Rails, Ratchet Straps, E Track Fittings with O-Ring, J Hook Fittings, End Caps and a storage bag!.
  • EASY TO USE - The included Cargo Straps, O-Ring Tie Downs, J-Hook Fittings, and Storage Bag all have E-Fittings which makes it easy to snap them in and out of the E Track Rails so you can customize your setup depending on what you are hauling..
  • BUILT TO LAST - Our E Track Rails, Cargo Straps, and E Track Accessories are made from high-quality materials such as galvanized steel and 6,000 lbs polyester webbing. They're strong and durablE - so you can secure your cargo with confidence..
  • KIT INCLUDES - (4) 5' Horizontal E Track Rails, (8) Plastic End Caps, (6) Straps (12', 16' and 20', 2 each), (4) O-Ring Fittings, (2) 2" J Hook Fittings, (2) 4.5" J Hook Fittings and (1) Storage Bag. NOTE: Hardware to fasten the Track not included..
  • SPECS - E Track Rails Made of 12-gauge Galvanized Steel | Cargo Straps Working Load Limit (WLL): 1,467 lbs. |....
Check Stock

Grease Gun Coupler, Locks onto Metric and SAE Zerk Grease Fittings, Positive Lock, Fits All 1/8” NPT Type Grease Guns, Quick Disconnect Lever, 10,000 PSI High Pressure, by Tech Team

  • Positive locking quick disconnect for secure attachment and easy release of zerk fittings..
  • The grease gun coupler allows you to put grease into zerks that are difficult to get at and includes an 8” high pressure hose for reaching into tight areas. Flex tube for increased reach..
  • The coupler has a 1/8” NPT thread that is compatible with all types of grease guns manual, electric, and pneumatic..
  • Zerk fittings included to replace clogged, broken, or damaged fittings..
  • Includes one (1) positive lock quick disconnect clamp, one (1) 200 mm flex extension tube, two (2) 90-degree grease fittings, two (2) 45-degree grease fittings, two (2) straight grease fittings, one (1) precision nozzle..
Check Stock

A-Team Performance - Brake Line Fittings Kit for Inverted Flares — 19 Fittings for 3/16 Tube and 16 Fittings for 1/4 Tube — Zinc-Coated Adapter, Pack of 35

  • Brake Line Fittings Kit for Inverted Flares — 19 Fittings for 3/16 Tube and 16 Fittings for 1/4 Tube — Zinc-Coated Adapter, Pack of 35.
  • For 3/16" tube there are a total of 19 fittings (12 x 3/8"-24, 3 x 7/16"-24, 2 x 1/2"-20 and 2 x 9/16"-18).
  • For 1/4" tube there are 16 fittings included (12 x 7/16"-24, 2 x 1/2"-20 and 2 x 9/16"-18).
  • Many local parts stores rent out flaring tools free.
Check Stock

Spectre Performance 2518 Fuel Pressure Regulator

  • Adjustable through a pressure range of 1 psi to 4 psi.
  • 3/8 In. barb fittings and mounting hardware included.
  • Use with 2515 or 59013 fuel pressure gauge.
  • 3/8 inch barb fittings and mounting hardware included.
Check Stock

In-Ground Sprinkler System with Hose Watering Timer

  • EVERYTHING YOU NEED: Kit contains digital timer, 6 high-efficiency sprinklers, Blu-Lock tubing and fittings, tubing cutter, and 200 lb. pressure gauge.
  • FAST AND EASY INSTALLATION: Blu-Lock has reduced required insertion force by half of traditional barb fittings, making installations faster and easier on your hands.
  • PUSH-ON QUICK-RELEASE FITTINGS: Blu-Lock quick-release collars allow for easy removal, yet the stronger the water pressure, the more the retaining rings grip the pipe to ensure against leaks.
  • ENVIRONMENTALLY FRIENDLY: Blu-Lock requires no glue or plumbers tape, protecting the environment from harmful chemicals used with traditional PVC fittings.
  • CONSERVE WATER: The timer features rain delay so you arent watering in the rain.
  • FLEXIBLE PROGRAMMING: A run time of 1-240 minutes, with intervals from every 6 hours to once every 7 days.
  • AREA COVERAGE: Ideal for medium to medium-large area coverage from 2,300-6,900 sq. ft. with average residential water pressure and flow.
  • ADJUSTABLE DISTANCE: Easy to adjust spray distance for each sprinkler from 15-25 ft. radius.
  • PART OR FULL CIRCLE: Simple to adjust from 40 to 360 degrees while the water is on or off.
  • TOOLS INCLUDED: Test water pressure before installation with the included 200 lb. gauge to ensure system....
Check Stock

3/4 Inch Tee Fitting Compression Tee Fittings for 3/4 Inch Tubing System (2 pcs)

  • 【Lead Free Material】PPSU is a durable plastic poly material, lead free and non-toxic. So PPSU is more eco-friendly than brass. These pex expansion fittings meet the standard of potable water grade. When the water flows through the poly pex fittings, it will not be polluted..
  • 【Fully Equipped】Qty: 1/2 inch pex expansion elbows 10pcs + 1/2 inch pex expansion Tees 10pcs + 1/2 inch pex expansion couplings 10pcs + 1/2 inch pex expansion rings 70pcs | Connection pipe type: Pex A pipe only | Max temperature: 200F | Max operating pressure: 160psi.
  • 【Professional Standards】Pex Expansion A Fittings are of high quality. All poly pex a fittings are manufactured according to ASTM F-1960, CSA B137.5 and qualified cUPC certification. Listed to NSF NSF/ANSI 61..
  • 【Easy to Install】Use expansion tools and expansion rings to connect the expansion fittings to the PEX A pipe. The protruding stop part on the expansion pex fitting makes it clear whether it has been installed in place. NOTE: Expansion tool is not included in the package..
  • 【Wide Usage】Plastic poly pex expansion fittings can be widely used in heating circulation system and domestic water. Due to its good corrosion resistance and heat resistance, it can have excellent performance even in a chemica....
Check Stock

POWERTEC 70201 4-Inch Three-Machine Dust Collection Kit

  • Create your own 3-machine dust-collection network.
  • Tailor your dust-collection system to your specific needs and shop room specifications.
  • Includes two 45-degree elbow connectors, two Y-fittings, three blast gates and twenty 4-Inch key hose clamps.
  • Fittings and gates constructed of durable, rugged, anti-abrasion ABS plastic.
  • It is recommended to ground your assembly to eliminate static electricity when employing included fittings and gates.
Check Stock

POWERTEC 70200 2-1/2" Three-Machine Dust Collection Kit

  • Create your own 3-machine dust-collection network.
  • Tailor your dust-collection system to your specific needs and shop room specifications.
  • Includes two 45-degree elbow connectors, two Y-fittings, three blast gates and twenty 2-1/2-Inch key hose clamps.
  • Fittings and gates constructed of durable, rugged, anti-abrasion ABS plastic.
  • It is recommended to ground your assembly to eliminate static electricity when employing included fittings and gates.
Check Stock

Diversitech CVENT-2 Concentric Vent 2

  • 2-INCH CONCENTRIC VENT: Makes it easier to have a two-pipe installation for high efficiency furnaces.
  • LOW PROFILE DESIGN: Simple and clean vent hides both the intake and exhaust pipework for a neat finish.
  • ALL FITTINGS INCLUDED: Everything needed to install the vent is included, no additional fittings for outside connections are needed.
  • FLEXIBLE INSTALLATION: Can be used in either a horizontal (through the wall) or vertical (through the roof) installation.
  • IDEAL SIZE: Measuring 7.75" x 34.75" x 6.75", this vent kit is the perfect size for your home.
Check Stock

SharkBite 1-1/4 to 2 Inch PEX Crimp Tool, 24675

  • ...imp Tool Kit works with 4 sizes of PEX tubing - 3/8-in., 1/2-in., 3/4-in., 1-in. (The tool itself) and includes a Decrimping Tool (for crimp ring removal) -all in a compact and durable carrying case. Compatible with all types of PEX copper crimp rings and crimp style PEX fittings.
  • Compatibility:Copper crimp rings made to ASTM F1807 standard (Sioux Chief, Watts, Nibco and other brands).Brass or Poly(PPSU) crimp style PEX fittings (F1807/F877 or F2159 standards respectively).All types and brands of PEX tubing - Everhot, Viega, Nibco, Watts, Zurn, etc..
  • Users Manual Included: Contains information on how to make a crimp connection, check connections with Go-No-Go gauge and calibrate the tool.
  • Crimp Ring Removal Tool: Allows PEX fittings to be used more than once. It is designed to remove copper crimp rings with gentle action that will not damage fittings. The easy dial setting adjusts for crimp ring sizes. Compatible with brass and PPSU fittings.
  • Calibration & Inspection: Tool calibrations are made easy with adjustable lock screws. The Crimp/Clamp Tools must be checked for correct adjustment at....
Check Stock

FORMUFIT F114TEE-WH-4 Tee PVC Fitting, Furniture Grade, 1-1/4\ Size, White (Pack of 4)

  • 【0% Metaloxide】: Poly PEX A expansion tee fittings made by premium PPSU materials without metal, provide lead-free potable water, healthy for human and environment..
  • 【PPSU Materials】: Light and durable, chemical stability. Well performance in corrosion resistant, heat and water resistance, RO (reverse osmosis), chlorinated and other types of water. Meet cUPC, NSF, F1960 standard..
  • 【160 PSI, 200°F】: Expansion tee fittings tightly connect with pex-a tube under high temperature/pressure. Applied to Building services pipework systems, Plumbing and heating (or cooling) systems, Potable water service line etc..
  • 【Stopping Shoulders】: To indicate PEX A pipe fully insert in expansion fittings, leak-free. Cold connection, use with expander and expansion rings, no require for glue or sealing tape..
  • 【Package】: 1/2" Poly Expansion PEX A Tee Fittings 15PCS. (Note：Expansion tool and rings are not included)..
Check Stock

Excavator Hydraulic Breaker Hammer Attachment Without Autogreaser | Heavy Equipment Machinery Parts | Fits Sany 35-48 Ton Machine

  • HYDRAULIC BREAKER HAMMER ATTACHMENT WITHOUT AUTOGREASER – This part fits Sany 35-48 Ton Machine Excavator. OEM Part Numbers:.
  • PROVEN AFTER-MARKET COMPONENTS – RAM Industrial provides the most proven after-market components for heavy machinery and equipment in the market. *DISCLAIMER: These are aftermarket parts. Some fittings may be different sizes or styles due to updated versions. If your old fittings do not work, please contact us and we will send fittings out to you immediately..
  • REDUCE MAINTENANCE COSTS BY 50 PERCENT – Our quality components reduce customer maintenance costs by up to 50% in comparison to OEM replacement options. These new, after-market options offer even greater value parts and machines are discontinued by manufacturers..
  • 6 MONTH WARRANTY – RAM Industrial after-market hammers have a 6 month parts only warranty including all of our branded breakers and other components..
  • WHAT'S INCLUDED? – Included with this hydraulic breaker hammer is one moil point, one flat chisel point, a tool box, hydraulic kit, and a parts manual..
Check Stock