Top Fixed Optical Attenuator

Passive Attenuator, 1.053M Input Res HT201 Converter Passive Attenuator 20:1 Passive Oscilloscope Signal Attenuator for Inductive Signal Primary Ignition, Automotive Diagnostics Use

20:1 OSCILLOSCOPE PASSIVE ATTENUATOR: Can be used with most oscilloscopes to measure injector and primary ignition waveforms. Note that this attenuator should not be used for any high pressure measurements other than injectors and primary igniters.
PASSIVE 20:1 ATTENUATOR: If input 20V signal, it can output 1V signal. Since the signal is attenuated, using this project, the oscilloscope can measure voltages above its range (±20V).
MEASUREMENT RANGE: Due to signal attenuation, using this item, the HT201 attenuator can measure voltages above its range (±20V).
PRODUCT FEATURES: It provides enhanced input overload protection when used in oscilloscopes to measure inductive signals, such as nozzles and primary ignition. Do not use it for secondary ignition tests.
AFTER SALES & SERVICE: If for some reason you are not satisfied with your purchase, damaged, damaged in shipping or even changed your mind. Please feel free to contact us, we will be happy to answer your questions.

Measuring power range -75 ~ +16 dBm (external RF attenuator can be extended to 100dBm).

【IRF Tube】Using IRF series transmitting tube to ensure its being durable & can be used to connect to an antenna (instrument base)..
【Lightweight&Cost-saving】The original QCX circuit is greatly simplified, and the installed components are reduced by 50 percent to save you the trouble of complicated transformer windings and wiring procedures..
【Less Power Consumption】Thanks to the EER transmitter E-level, it boasts high power efficiency and no bulky heat sink is required..
【DSP Function】Automatic gain control (AGC), noise reduction (NR), voice trigger, voice trigger Xmit (VOX), RX attenuator attenuator (ATT), TX noise gate, TX driver control, volume control, dBm/S-meter..
【Quality Material Handling】Laser marking aluminum laser, aluminum knobs with translucent silicone buttons..

Attenuation Factor and Step Size :The HMC472 is a wideband 6-bit digital attenuator with an attenuation range of 0 to 31.5 dB and a typical step error of ± 0.25 dB..
Operating Frequency Range :Adopt QFN surface mount package, uses single power supply 5V, working frequency range from DC to 3.8 GHz..
Insertion Loss :Insertion loss is less than 2.0 dB (typical) and IIP3 is +54 dBm..
Objects Used :Suitable for a variety of RF and IF applications..
Attenuation Control Interface :Manually adjust the control through the 6-position pin header on the board..

The HT201 has been designed to allow fuel injector and primary ignition waveforms to be measured using Hantek oscilloscope products..
Please note this attenuator should not be used for any high voltage measurements other than fuel injectors and primary ignition..
Passive attenuator with 20:1 attenuation, if input a 20V signal, it can output a 1V signal.Because the signal is attenuated, by using this item, oscilloscope can measure voltage higher than its range(±20V).
【What you will get】 1 x HT201 Signal Attenuation.
【Please Note】 After receiving the product, please check whether it is damaged. If you have any questions, please contact us in time. This product is a consumable and needs to be replaced regularly. Once the product is used, the warranty is not allowed..

Large Range: The measuring power range of this RF power meter is -60～-5 dBm (External RF attenuator can be extended to 100dBm), and the frequency range is up to 8000MHz..
Specific Feature: The RF power meter is light, compact and convenient, with a measurement power resolution of 0.1 dBm, and an output interface SMA_K..
Clear Display: This RF power meter comes with an LED screen, the data is clear and straightforward, and it is easy to use..
Standard Structure: The precise mechanical structure of the RF power meter makes the measurement accurate, convenient and reliable..
Quality Assurance: The RF power meter has been inspected many times before it leaves the factory to confirm the quality..

Capture the memories with this easy to use reusable 35mm film camera from Kodak.
This camera runs on a single AAA battery (not included) and features an optical viewfinder, f/10 aperture and 1/120 second shutter speed..
This easy to use camera will get all your photography needs done the easy way -- and keep it a surprise until developed!.

28-140mm F3.9-4.8 equivalent lens with optical image stabilization (5x optical zoom).
1080/24p HD video plus super slow motion video at 640x480 (H.264).
Temperature resistant from 14° to 104°F.

What a Creative and interesting 3d night light---an optical Acrylic flat panel with laser engraving can give you amazing 3D visual effect. Sleep with the night lights on can help you fell safe at night..
SMART TOUCH ---7 colors change monster truck night light by both touch button and fixed --red, green, blue, yellow, cyan, purple and white, can fixed one color or 7 colors gradual changing..
CONVENIENT AND SAFE --- Two methods of electricity supply: 3* AA Batteries or usbs Cable to PC or your home 5V adaptor. Light source usd the high quality LED, the light is soft and uniform, no dazzling, non-flicker, harmless to children's eyes..
3D LAMPS MATERIAL: What is 3D optical night light? ---The name is 3d night light, but it is not really a 3D "hologram" monster truck, it unique lighting effects amazing optical visual home decor lamp. it is a flat piece of acrylic panel with etched lines when lighting the transparent pattern looks like a 3d hologram effect appearing.3D Night Light Effect, the lamp itself is flat plastic.
SATISFACTION GUARANTEE: Stands by 100% quality of our 3D night light. Each night light is thoroughly tested before we put our name on it. We offer a full 180-day 100% money back guarantee: if it doesn't work out for you for any reason then se....