Top Flange Bearings

uxcell Flanged Sleeve Bearings 12mm Bore 15mm OD 15mm Length 21mm Flanged Dia 3mm Flange Thickness Wrapped Oilless Bushings Brass 2pcs

  • Size - Bore Diameter: 12mm, Outside Diameter: 15mm, Total Length: 15mm, Flange Diameter: 21mm, Flange Thickness: 3mm.
  • Material - Made of cast brass and fitted with graphite which is self-lubricating and does not require oiling. Has good load capacity and wear resistance..
  • Function - Also known as plain bearings or bushings. They are mainly used to guide or reduce friction in linear applications..
  • Application - Used in various industrial equipment such as electrical equipment, household equipment, printing machines and machine tools..
  • Notice - Pressed in with a vise or punching machine. They can be held in place with adhesives or locking screws..
Check Stock

JEENDA Flange Wheel Bushing Bearing 741-0990B 741-0990A 741-0660 Compatible with MTD Cub Cadet Troy-Bilt LT1042 LT1045 LT1046 LT1050 SLT1550 SLT1554 Lawn Mowers

  • Part Number:741-0990B, 741-0516B, 741-0990A, 741-0990, 741-0516A, 741-0516, 941-0516.
  • Rotary 12857 Bushings and 11714 Bearings.
  • Compatible with MTD Cub Cadet Troy-Bilt LT1042 LT1045 LT1046 LT1050 SLT1550 SLT1554 Mowers.
  • Compatible with MTD Huskee Poulan Roper Yard Machine 1.0" x 3/4".
  • Details: MTD 741-0660 Height:1.0″ ID:3/4″ OD:15/16″.
  • MTD 741-0990A Height:1 3/8″ ID:3/4″ OD:1″ Flange Dia:1 1/16″.
  • Package Includes: 2 Flange Bushings and 2 Bushings.
Check Stock

Mevotech TTX Suspension Ball Joint

  • MAXIMUM TOUGHNESS: Get longer-lasting performance from patented sintered bearings..
  • EASIER INSTALLATION: Quickly install the ball joint with the custom-designed adapter ring..
  • SUPERIOR SEAL: Lock out moisture and contaminants with Integri-Boot design built into the ball joint assembly..
  • SIMPLE TO SERVICE: Make servicing a snap with the 180 Degree & 90 Degree SAE grease fitting included..
  • ACCURATE FIT: Easily and accurately press fit the ball joint into the larger flange diameter..
Check Stock

ECCPP Wheel Hub and Bearing Assembly Front 515036 fit for Chevrolet Silverado 1500 GMC Sierra 1500 Cadillac Escalade Chevrolet Tahoe 1999-2007 4WD 4x4 Only 6 Lugs Wheel Hub with ABS 3 Bolt Flange

  • 2001-2006 GMC Yukon 4WD (No Denali 2000).
  • 2000-2006 GMC Yukon XL 1500 4WDFit ONLY 4WD 4X4 Vehicles.
  • MAIN FUNCTION - Hub bearings can fix the tire and support the gravity of the whole body, provides precise guidance for the rotation of the hub. wheel hub bearing enables the wheels and attached components to rotate smoothly and keeps the wheel attached to the car. High quality wheel hub assembly make you enjoy your vehicle in a safe and smooth.
  • PREMIUM FEATURES - ECCPP wheel bearing assemblies manufactured by high-quality materials for ensuring precisely matches, durability, reliability and premium performance. The high-quality seal design provides superior anti-pollution protection, ensuring that the hub bearings are clean, long lasting and minimizing noise and vibration. Wheel bolts with protective coating that helps prevent rust and corrosion and makes it easier to disassemble and properly twist the wheel nuts.
  • SERVICE WARRANTY - 1 year warranty, support replace, return and refund service.
Check Stock

ZSKL - 2 PACK-7/8\ UCFL 205-14 Premium Quality Two Bolt Flange Bearing 7/8\Bore Self-Alignment Farm Machinery Conveyor Manufacturing Equipment Automotive Agriculture Pump

  • EASY TO INSTALL: UCFL205-14, ZSKL 2 pack of premium quality two bolt flange bearing contains 2 kilograms of wait. Easy and convenient to place at its required place..
  • APPLICATION: Two bolt Flange Mounted Bearings, bearing for efficient operations at a wide range of speeds.
  • SIZE: 7/8" Bore size. It is made of very high-quality material and specially made to reduce your replacement frequency and maintenance cost..
  • SHAFT LOCKING TYPE: Set Screw. It is ideal for higher resistance and durability. It will surely satisfy all your needs..
  • EASY TO PLACE: Bearing Insert Material 52100 Chrome Steel. Easy and enough convenient to place at its required place..
Check Stock

Mevotech TTX Suspension Ball Joint

  • MAXIMUM TOUGHNESS: Get longer-lasting performance from patented sintered bearings..
  • QUICK AND EASY INSTALLATION: Simply secure ball joint to the vehicle with part specific Slotted Castle Nut & Easy Snap Cotter Pin provided..
  • SUPERIOR SEAL: Lock out moisture and contaminants with Integri-Boot design built into the ball joint assembly..
  • SIMPLE TO SERVICE: Make servicing a snap with the 90 Degree SAE grease fitting included..
  • ACCURATE FIT: Easily and accurately press fit the ball joint into the larger flange diameter..
Check Stock

NTN Bearing 30206 Tapered Roller Bearing Cone and Cup Set, Steel, 30 mm Bore, 62 mm OD, 17.25 mm Width

  • 30206 Bearing Size: Out Diameter:62mm/2.44 inch.
  • Ealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use.
  • Complete single tapered roller bearing assemblies are generally mounted in opposing pairs on a shaft to evenly distribute loads..
  • They incorporate logarithmic roller and raceway profiles with a optimized surface finish for ultimate roller to flange contact. These features result in reduced noise and smooth operation..
  • Widely used in transmissions, span styleoil or greased, high radial and axial load, trailer and caravan axles, gearboxes and differentials, span..
Check Stock

General Motors 12643668, Engine Crankshaft Thrust Washer

  • Thrust washers limit axial movement and provide a bearing surface. Thrust bearings are designed to support axial load..
  • Thrust washers either have multiple tapered ramps and relatively small flat pads or have curved surfaces that follow a sine wave contour around their circumference..
  • Tear-drop or through grooves on the flange faces and wedge shaped ramps at each parting line allow engine oil to enter between the shaft and bearing surfaces..
  • Manufactured to meet or exceed OE specifications.
Check Stock

uxcell Flange Sleeve Bearings 8mm Bore 12mm OD 12mm Length 16mm Flange Dia 2mm Flange Thickness Sintered Bronze Self-Lubricating Bushing 4pcs

  • Size - Bore Diameter: 8mm, Outside Diameter: 12mm, Total Length: 12mm, Flange Diameter: 16mm, Flange Thickness: 2mm.
  • Material - Sintered Bronze (copper-tin alloy). They are self-lubricating, making them maintenance-free. High wear-resistant and corrosion-resistant..
  • Function - The bushings can be used for different purposes, such as positioning, wear and vibration reduction, or to isolate the shaft from special media to increase the life of the shaft..
  • Application - Bronze bushings are most for general-purpose where moderate speeds and loads are present. Sleeve bearings are used in a vast variety of industrial equipment..
  • More - They also can be used for reducing bore diameter or replacing worn-out original bushings on wheels..
Check Stock

JET 1-PT, 1-Ton Heavy-Duty Manual Trolley (252010)

  • Compatibility: Easily adjustable to wide-flange H-beams, standard I-beams, or curved track..
  • Extended Life: Built-in bumper guards on the side plates..
  • Smooth Movement: Hardened large steel wheels and thicker double sealed lubricated ball bearings..
  • Maximum Durability: Welded heavy gauge steel frame and powder coat finish..
  • Certified Safety: Complies with OSHA Regulations, and ANSI / ASME B30.11 and B30.17 standards..
Check Stock

Clevite TW-678S Engine Crankshaft Thrust Washer Set

  • Thrust washers limit axial movement and provide a bearing surface. Thrust bearings are designed to support axial load..
  • Thrust washers either have multiple tapered ramps and relatively small flat pads or have curved surfaces that follow a sine wave contour around their circumference..
  • Tear-drop or through grooves on the flange faces and wedge shaped ramps at each parting line allow engine oil to enter between the shaft and bearing surfaces..
  • Manufactured to meet or exceed OE specifications.
Check Stock

Clevite TW-473S Engine Crankshaft Thrust Washer Set

  • Thrust washers limit axial movement and provide a bearing surface. Thrust bearings are designed to support axial load..
  • Thrust washers either have multiple tapered ramps and relatively small flat pads or have curved surfaces that follow a sine wave contour around their circumference..
  • Tear-drop or through grooves on the flange faces and wedge shaped ramps at each parting line allow engine oil to enter between the shaft and bearing surfaces..
  • Manufactured to meet or exceed OE specifications.
Check Stock