Top Flange Bolts And Cap Set

Flange Wizard 42050-TL Large Threaded Two Hole Pins, 1/2" - 1-15/16"

  • 【Set 2 Hole Pins】1-1/8'' Diameter, work with Bolts Holes Recommended 3/8'' to 1.0''.
  • 【Set 2 Hole Pins】1-5/8'' Diameter, work with 1/2 '' to 1-1/2'' Bolt Holes Up to 3'' Thickness of Flange.
  • 【Easy installation】The 2 hole pins pipe fitting tools is ergonomically designed for lightweight construction and easy installation with removable threads to accommodate different lengths. By using this two hole flange alignment pin set, you can easily install and level the pipe.
  • 【Package Included】4Pcs/1set, 1-1/8'' two hole pins and 1-5/8'' 2 Hole Pins.(As the picture shows).
  • 【Note】Professional installation is highly recommended (No Instruction Included).For any needs please contact us and got an reply within 24 hours.
Check Stock

Metric Class 8.8 Hex Cap Flange Frame Bolts & Flange Nuts Assortment Kit - 383 Pieces!

  • 383 Pieces - High Quality Class 8.8 Flange Bolt & Nut Assortment!.
  • Bolts: Metric Class 8.8 Hex Flange Bolts Zinc Yellow.
  • Nuts: Matching Hex Flange Nuts CL8 Zinc Yellow.
  • Heavy Duty Locking Steel 24 Hole Compartment Tray (Dim: 13-3/8" Width x 2" Height x 9-1/4" Depth).
  • M6", M8" M10", & M12" Coarse Diameters Included (See photos for specific sizes).
Check Stock

250pc Specbolt Yamaha Blaster Bolt Kit for Maintenance & Restoration OEM Spec Fasteners ATV Quad YFS200

  • 250 pieces of original factory fit flange bolts, nuts, special Yamaha fasteners, and fender washers.
  • Strong heat treated 8.8 & 10.9 grade bolts that meet and exceed original specs.
  • Generous selection of the correct Nylon Push Rivets, full set of lug nuts, bumper bolts, and more.
  • Used for maintenance, repair, and or restoration of Yamaha Blaster ATV YFS200 1988 TO 2006.
  • Complete and organized in a tough 18 compartment high impact poly storage box.
Check Stock

Remflex 8002 Universal Exhaust Gasket, (Set of 2)

  • Universal 3” Collector Flange, 3 Bolt Holes, 3-3/8" Bolt Hole Spacing, 2/Set.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
  • Remflex exhaust gaskets fill those gaps permanently.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

Remflex 8001 Universal Exhaust Gasket, (Set of 2)

  • Universal 2-1/2” Collector Flange, 3 Bolt Holes, 3-1/32" Bolt Hole Spacing, 2/Set.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
  • Remflex exhaust gaskets fill those gaps permanently.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

Remflex 8003 Universal Exhaust Gasket, (Set of 2)

  • Universal 3-1/2” Collector Flange, 3 Bolt Holes, 3-25/32" Bolt Hole Spacing, 2/Set.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
  • Remflex exhaust gaskets fill those gaps permanently.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

76pc SPECBOLT Body Bolt KIT for Plastics seat fenders Fork Guards shrouds & subframe. Fits KTM & Husqvarna 65 80 85 125 150 200 250 350 400 450 500 520 525 SX SX-F XC XC-F XC-W XCF-W EX EXC EXC-F

  • 76 matching factory fit flange bolts that fit: KTM Husqvarna.
  • OE type torx head flange bolts with factory matching Dacromet plating.
  • Generous selection of Original Factory Matching fasteners.
  • Used for body work, plastics, seat, fork guards, and subframe on 2 and 4 stroke bikes.
  • Complete with 2 styles Factory Match radiator shroud bolts gold screws and M5 flange bolt type.
Check Stock

Danco 89055 5/16 in. x 3-1/2 in. Brass Closet Bolts with Nuts and Washers (2-Pack)

  • ✅DESIGN- Designed to resist damage to the surrounding china due to overtightening..
  • ✅QUALITY- Made of durable nylon that provides strength and resists corrosion..
  • ✅EASY TO USE- The closet bolts are built for smoother and faster threading during installation..
  • ✅FUNCTIONALITY- These bolts anchor the toilet to the floor once you have set everything in place. Features a unique bolt base that preloads into any flange and eliminates the need to double nut..
  • ✅MEASUREMENT- The closet bolts are built to fit 2-1/2 inch openings for smoother and faster threading during installation..
Check Stock

VIGRUE 180PCS M6 x 20/30/40/50/60/70/80mm Bolts Nuts Kit Furniture Bolt Crib Screws Kit Hex Socket Head Cap Screws Nuts Barrel Bolt Nuts for Crib Bunk Bed Cot

  • M6 Furniture Bolt Nuts KitThis set includes 66pcs M6 bolts ( 7 sizes), and 120pcs M6 nuts (30pcs inserts nut, 60pcs barrel nuts, 30pcs flange nuts).
  • MultipurposeThe hardware replacement kit fit for different kinds of furniture such as cribs, bunk beds, cabinets, table, chairs, cots. It is also ideal for joining wood, boards, kitchen worktops, workbench, headboards, cupboards, other furniture..
  • Sturdy and Durable Materialthis crib screws kit is made of high speed zinc plated metal with the performance of wear-resistance, high hardness and good toughness. Zinc plated surface prevents it from rustiness, corrosion and oxidation..
  • Easy to Storethe bolts and nuts come in a portable transparent box with corresponding label. It is convenient for you to put away and store, which allow you to get the one you need quickly, improving your project efficiently..
  • Fine WorkmanshipVIGRUE hex socket head cap screws nuts threads m6 kit accord with standardized metric system, which are not easy to deform and slide in your diy project. The matching hexagonal drive is convenient for your progress..
Check Stock

Specbolt Fasteners Brand 150pc Bolt Kit. Fits: Yamaha Blaster YFS200 ATV Maintenance Body fenders lugs Motor Engine Exhaust

  • 150 pieces of original factory fit flange bolts, nuts, special Yamaha fasteners, and fender washers.
  • Strong heat treated 8.8 & 10.9 grade bolts that meet and exceed original specs.
  • Generous selection of the correct Nylon Push Rivets, full set of lug nuts, bumper bolts, and more.
  • Used for maintenance, repair, and or restoration of Yamaha Blaster ATV YFS200 1988 TO 2006.
  • Complete and organized in a tough 6 compartment high impact poly storage box.
Check Stock

Specbolt Fasteners 250pc Premier-Pack Bolt Kit Yamaha - YFZ 450 YFZ450 ATV for Maintenance Upkeep & Restoration OEM ATV Quad

  • 250 pieces of original factory fit flange bolts, nuts, and fender washers.
  • Strong heat treated 8.8 & 10.9 grade bolts that meet and exceed original specs.
  • Generous selection of the correct Nylon Push Rivets, full set of lug nuts, bumper bolts, and more.
  • Used for maintenance, repair, upkeep and or restoration projects of YFZ450 ATV.
  • Complete and organized in a tough 18 compartment high impact poly storage box.
Check Stock

M10-1.5 x 50mm Flanged Hex Head Bolts Flange Hexagon Screws, Stainless Steel 18-8 (304), Plain Finish, DIN 6921, 5 PCS

  • High quality Grade A2-70 Stainless Steel 18-8 (304) provides strength and offers good corrosion resistance in many environments..
  • Flange bolts have a flange on the bottom of the head that distributes the load like a washer..
  • Thread Diameter 10 mm, Thread Size 1.5 mm (M10), Screw Length 50 mm..
  • Flanged Bolts are great to have around for use in wood and wet environments..
Check Stock