Top Flange Slide Bearing

USA Standard Gear (ZBKF8.8) Bearing Kit for Ford 8.8 Differential

• Replacement T-5 bearing retainer with steel throw-out bearing sleeve....
• Fits production and Ford Racing T-5 transmissionsSmoother clutch engagement can be yours with one of these Ford Racing T-5 bearing retainers. The steel bearing sleeve and aluminum mounting flange reduce flex for more consistent....

Orion Motor Tech 9-Way Slide Hammer Puller Set, Front Wheel Hub Bearing Remover & Rear Wheel Axle Hub Dent Shaft Puller Tool Kit

• VERSATILE PULLER SET: The Orion Motor Tech 9-Way Slide Hammer Puller Set with 4 lb slide hammer is ideal for a variety of pulling applications, including flange-type rear axles, most front-wheel-drive hubs, pulling dents, and other press-fit parts (bearings, bushings, gears, pulleys, etc.)..
• INTERNAL & EXTERNAL JAWS: Includes 2-jaw and 3-jaw pullers for internal and external work to provide a variety of combinations to pull bearing, gears, and seals. 2 and 3-way cross blocks and cone-type puller provide the perfect jaw configuration for most jobs..
• ULTIMATE DURABILITY: Built to last with rugged carbon steel alloy and chrome vanadium steel components, our tool kit can withstand accidental drops and years of heavy use without cracking or rusting..
• INSTRUCTIONS INCLUDED: To help novice DIYers get the job done right, we've included a detailed parts diagram and step-by-step instructions to simplify tough jobs like the piston wind-back process..
• 1-YEAR WARRANTY: In order to provide a worry-free shopping experience, we promise a 1-year warranty and 100% free exchange if the product is defective. Includes a protective carrying case to extend the life of your tools..

OEMTOOLS 27059 Pilot Bearing Puller Attachment, Pilot Bearing and Bushing Removal, Fits 5/8” x 18” or 3/4” x 16” Threaded Rods , Black

• EASY TO USE: The slide hammer bearing puller can be used in four steps: Insert the pilot bearing puller, turn the attachment housing expanding both jaws against the pilot bearing, attach a slide hammer, and use the slide hammer to remove the bearing.
• SAVE MONEY: Getting a pilot bearing replaced in an auto shop could cost you up to $650.
• You can save hundreds of dollars by using this one pilot puller.
• VARIETY OF USES: Not only can this pilot bearing tool be used as a bearing puller, but it can also be used as a bushing tool on starters and generators.
• This pilot bearing removal tool will also fit any 5/8” x 18” or 3/4” x 16” threaded rods.
• DURABLE: Made from steel, this bearing and bushing removal tool can withstand years of regular pilot bearing jobs.
• This blind hole bearing puller is built to last.
• DIMENSIONS: This pilot bearing remover is easy to store anywhere at just 10.4" x 3.4" x 1.3". The blind bearing puller is also easy to wield, weighing in at just 13.6 ounces, making it a great pilot tool.

Detroit Axle - 5-Lug Front Wheel Hub Bearing Assemblies Replacement for Sebring Cirrus 200 Dodge Avenger - 2pc Set

• Fits: Specific Models - Check Fitment Chart and Product Description for Accurate Information.
• Kit Includes: (2) Front Wheel Hub Bearing Assembly.
• Hub Specifications: Position: Front Left and Right| Lugs: 5 Bolt| ABS Type: Encoder| Flange Type: 4-Bolt Square.
• Undergo impact, wear, and fatigue testing to help ensure quality and durability.
• 10-Year Warranty. Detroit Axle Is A Leading Supplier Of Hub Bearing Assembly, Wheel Bearing, Assembly Model. The Part In This Kit Are Direct Compatible With Chrysler 200 Sebring Front Wheel Bearing, Dodge Avenger Hub Assembly And Front Wheel Bearing, Wheel Bearing Assembly.

ATP Blind Inner Bearing Puller Slide Hammer Set Hole Remover Extractor Set 5PCS

• Premium Quality: The slide hammer puller set is constructed from drop forged steel with a fully chromed carbon steel slide hammer for maximum strength and longevity that resists rust and corrosion..
• Specifications of The Bearing Puller Set: Overall length 15''/382mm, bearing extractor collets with internal capacity from 3/8"/10mm to 1-1/4"/32mm, bearing extractor 3/8"/10mm to 1/2"/14mm, 9/16"/15mm to 11/16"/19mm. 5/8"/18mm to 1"/25mm, 1"/25mm to 1-1/4"/32mm..
• Great Function: Open clamps by turning handle clockwise to snug against the bearing, the blind bearing puller is great for pulling out evenly without damage the parts..
• Wide Application: This pilot bearing removal tool blind hole bearing puller is ideal for pulling jobs,against the bearing for pulling out evenly without damage the parts, and perfect for professional and DIY use..
• Storage Case: The slide hammer bearing puller is packed in a heavy-duty storage case with precision-sized compartments for every piece - great for storage and transport while lengthening....

KUSATEC 515096 2PCS Front Wheel Bearing and Hub Assembly Fit For Cadillac Escalade ESV EXT, Chevrolet Avalanche/Silverado Suburban 1500/Tahoe, GMC Sierra 1500 Yukon XL, 6 Lugs w/ABS

• 【Compatibility Vehicle】 515096 Front Wheel Bearing and Hub Assembly Replacement for Cadillac Escalade ESV EXT AWD Only, Chevrolet Avalanche / Silverado Suburban 1500 / Tahoe 4WD Only, GMC Sierra 1500 Yukon XL 4WD/AWD.
• 【Product Specification】 Brand New Wheel Bearing and Hub Assembly, Part No.: 515096 , Fits for the Front position, Number of Flange Bolts Hole: 3，Flange Bolt Thread Size: M14X1.5，6 Lug Bolts, w/ABS.
• 【Real image and easy to install】 All pictures are real shots, our products are consistent with the pictures, Wheel Hub and bearing assembly have undergone strict design and production, easy to install, stable operation, safe and reliable, can be perfectly replaced with 515096 Wheel Bearing and Hub Assembly..
• 【High Quality】Wheel hub bolts with protective coating, not easy to rust and corrode, and easier to tighten the wheel nuts. Better seal design, which lasts and minimizes noise and vibration. Each item is factory quality inspected according to OEM production standards and meets the highest standards..
• 【About KUSATEC】All products have one-year quality warranty, if you have any quality problems, please feel free to contact us. All products are shipped by Amazon Fulfillment, and it only takes 2~5 working days to arrive, whi....

KUSATEC 513188 Front Wheel Hub and Bearing Assembly Fit for 02-09 Chevy Trailblazer, 03-06 Chevy SSR, 02-09 GMC Envoy, 03-08 Isuzu Ascender, 04-07 Buick Rainier, 05-09 SAAB 9-7X, 6 Lugs W/ABS

• 【Compatibility Vehicle】 513188 Wheel Bearing and Hub Assembly Replacement for Chevy SSR Trailblazer EXT, GMC Envoy XL XUV, Buick Rainier 2004 2005 2006 2007, Isuzu Ascender Bravada, Saab 9-7x.
• 【Product Specification】 Brand New Wheel Bearing and Hub Assembly, Part No.: 513188 , Fits for the Front position, Number of Flange Bolts Hole: 3，Flange Bolt Thread Size: M12X1.5，6 Lug Bolts, w/ABS.
• 【Real image and easy to install】 All pictures are real shots, our products are consistent with the pictures, Wheel Hub and bearing assembly have undergone strict design and production, easy to install, stable operation, safe and reliable, can be perfectly replaced with 513188 Wheel Bearing and Hub Assembly..
• 【High Quality】Wheel hub bolts with protective coating, not easy to rust and corrode, and easier to tighten the wheel nuts. Better seal design, which lasts and minimizes noise and vibration. Each item is factory quality inspected according to OEM production standards and meets the highest standards..
• 【About KUSATEC】All products have one-year quality warranty, if you have any quality problems, please feel free to contact us. All products are shipped by Amazon Fulfillment, and it only takes 2~5 working days to arrive, which solves your urgent nee....

KUSATEC 513188 2PCS Front Wheel Bearing and Hub Assembly Fit For Chevy SSR Trailblazer EXT, GMC Envoy XL XUV, Buick Rainier 2004 2005 2006 2007, Isuzu Ascender Bravada, Saab 9-7x, 6 Lug w/ABS

• 【Compatibility Vehicle】 513188 Wheel Bearing and Hub Assembly Replacement for Chevy SSR Trailblazer EXT, GMC Envoy XL XUV, Buick Rainier 2004 2005 2006 2007, Isuzu Ascender Bravada, Saab 9-7x.
• 【Product Specification】 Brand New Wheel Bearing and Hub Assembly, Part No.: 513188 , Fits for the Front position, Number of Flange Bolts Hole: 3，Flange Bolt Thread Size: M12X1.5，6 Lug Bolts, w/ABS.
• 【Real image and easy to install】 All pictures are real shots, our products are consistent with the pictures, Wheel Hub and bearing assembly have undergone strict design and production, easy to install, stable operation, safe and reliable, can be perfectly replaced with 513188 Wheel Bearing and Hub Assembly..
• 【High Quality】Wheel hub bolts with protective coating, not easy to rust and corrode, and easier to tighten the wheel nuts. Better seal design, which lasts and minimizes noise and vibration. Each item is factory quality inspected according to OEM production standards and meets the highest standards..
• 【About KUSATEC】All products have one-year quality warranty, if you have ....

STARTOSTAR Adjustable Closet Rod 21.6 to 40.5 Inch Small Size Stainless Steel Clothes Rod with for Wardrobes, Shoe Cabinets(Need tools to install)

• ★Adjustable Clothes Rod: 21.6 to 40.5 inch adjustable closet rod set,expands by simple twist, perfect for hanging clothes and organize your closet（Note: Requires drilling to install）.
• ★Rust Proof Closet Rod: The Closet Rod made with premium stainless steel, slippy, rust-proof.fix with 2 flange sockets, can withstand a lot of pressure from the hangers. load-bearing up to 55 lbs.
• ★Wide Application: 21.6 to 40.5 inch adjustable closet rod set are perfect for hanging clothes and organize your wooden closet, wardrobe( just apply to the wooden wardrobe).
• ★Easy to Install: Select the position you want to install, put the flange on the wall and fix it with screws. Insert one end of the rod into the flange, and adjust the clothes rod to a suitable length, then insert the other end of the rod into the flange, clockwise rotate the two ends of the pole to secure it..
• ★What's In The Box: 1x adjustable closet Rod, 2 x flange sockets, 4 x screws. our worry-free 12-month and friendly customer service..

Mikuni 13-5000 Roundslide Carb Mikuni Vm22

• Specification: Type: Flange Mount Carburetor.
• Two Years Hassle-Free Warranty. 100% brand new and high quality guaranteed..
• Returns will be accepted up to 30 days from the date of purchase in new, unaltered and resalable condition..

Autoround Wheel Hub And Bearing Assembly 515073

• COMPATIBILITY - 515073 Wheel Hub Assembly compatible with 2002-2005 Dodge Ram 1500. For more detailed model application information, please check....
• FEATURES - 5 Lugs, ABS System, Flange Diameter: 7.2IN, Flange Offset: 1.84IN, Bolt Circle Diameter: 5.5IN, Replaces parts: 68030387AA SP500100....
• QUALITY - Autoround Wheel Bearing and Hub Assemblies has been quality tested to meet or exceed OEM performance standards.
• INSTALLATION - Assembling has excellent performance, precise overall structure, easy and quick installation.
• SERVICE&WARRANTY - Support replace, return, refund service and 1 year warranty. Please Feel Free to contact “Autoround customer service” if you....

1 1/4 Bearing UCF207-20 + Square Flanged Cast Housing Mounted