Top Flange Type Triple Eccentric

Ludwig Copper Phonic Hammered Snare Drum 14 x 6.5 in. Copper Finish with Tube Lugs

  • Configuration Snare Size: Multiple Sizes Total Pieces: 1 Extras Case or Bag: Not Applicable Stand: Not Applicable Shells Shell Material: Copper Shell Construction: Rolled Shell Thickness (mm): 1.2 Bearing Edge: 45 Reinforcement Ring: No Hardware Hardware Material: Steel Hoop Type: Triple-flange Lugs: Multiple Throw-Off: Side Internal muffler: No Snares: Steel Other 003cbr.
  • Copper Finish with Tube Lugs "With close to century of experience building copper timpani, the newest member to the Ludwig USA snare drum range is the Copper Phonic Hammered snare drum.
  • The first American-made Ludwig snare drum in 20 years offers a 1.
  • 2mm hammered shell and produces warm tone, powerful attack and dry overtones.
Check Stock

Ludwig Copper Phonic Hammered Snare Drum 14 x 6.5 in. Copper Finish with Imperial Lugs

  • Configuration Snare Size: Multiple Sizes Total Pieces: 1 Extras Case or Bag: Not Applicable Stand: Not Applicable Shells Shell Material: Copper Shell Construction: Rolled Shell Thickness (mm): 1.2 Bearing Edge: 45 Reinforcement Ring: No Hardware Hardware Material: Steel Hoop Type: Triple-flange Lugs: Multiple Throw-Off: Side Internal muffler: No Snares: Steel Other 003cbr.
  • Copper Finish with Imperial Lugs "With close to century of experience building copper timpani, the newest member to the Ludwig USA snare drum range is the Copper Phonic Hammered snare drum.
  • The first American-made Ludwig snare drum in 20 years offers a 1.
  • 2mm hammered shell and produces warm tone, powerful attack and dry overtones.
Check Stock

MaxSen 8 Inch Center Deck Mount Double Handle Spray Value Commercial Pre Rinse Restaurant Kitchen Faucet With Pot Filling Add On Spout (8 Inch Centersize)

  • 【8" Center Commercial Faucet】Low Profile Pre Rinse unit with Eccentric Flange, fit for centerset 7 3/16"(196mm) - 8 5/16"(212mm). Heavy Duty Construction Commercial Deck Mount Kitchen Sink Faucet With Brass Compression Cartridge to prevent cross flow..
  • 【Easy Installation】Built-in water sealing washer , no need to apply PTFE tape. Repair Kit ( spare washers and screws) and Deck Mount Install Kit Included..
  • 【25" Height Commercial Style Faucet】 with 1.42GPM Powerful Pre Rinse Spray Valve."No Screw" Design , Avoiding Latent Leakage Problem Caused by Corroded Screw..
  • 【Heat Resistant Steel Flexible Hose】Durable Stainless Pressure，With Food Grade Polyurethane Inner Tube.
  • 【8 Inch Swiveling Add On Spout】 for Complete Assess of Kitchen Sink.
Check Stock

Martin 9HS Quadraflex Sleeve, Hytrel, Inch, 6\ OD, 3\ Length

  • For use with specific Martin flange types (J type flanges in the case of JEM and JEMS type sleeves, and all flange types in the case of EM type sleeves) in the Quadra-Flex series flexible coupling assemblies (sold separately).
  • Thermoplastic rubber for resistance to oil and higher temperatures.
  • Three types: one-piece solid (Type JEM), one-piece split (Type JEMS), and two-piece split with a metal retaining ring (Type EM) for applications where the coupled shafts are difficult to separate.
  • Operating temperatures range from -50 to 275 degrees F (-46 to 135 degrees C).
Check Stock

Sound Percussion Labs High-Tension Marching Snare Drum with Carrier 13 x 11 in. White

  • Configuration Snare Size: Multiple Sizes Total Pieces: 1 Shells Shell Material: Copper Shell Construction: Rolled Shell Thickness (mm): 1.2 Bearing Edge: 45 Reinforcement Ring: No Hardware Hardware Material: Steel Hoop Type: Triple-flange Lugs: Multiple Throw-Off: Side Internal muffler: No Snares: Steel Other Heads: Branded Case or Bag: Not Applicable Stand: Not Applicable Country of Origin: United States.
  • Smooth Finish with Tube Lugs With close to century of experience building copper timpani, the newest member to the Ludwig USA snare drum range is the Copper Phonic Hammered snare drum.
  • The first American-made Ludwig snare drum in 20 years offers a 1.
  • 2 mm hammered shell and produces warm tone, powerful attack and dry overtones.
Check Stock

LiveMus!c HearSafe Ear Plugs - High Fidelity Earplugs for Musician, Concert, Drummer, DJ & Clubbing - Reusable, Comfortable - Noise Protection, Cancelling (Large Size)

  • , safeguard your ear against loud sounds or noises that can leave a lasting damage to your hearing like tinnitus & noise induced hearing loss.
  • & , These noise cancelling ear plugs are made with finest quality soft silicone, being 100% hypoallergenic and safe. The triple flange design and cone shaped tip have your comfort in mind, fitting perfectly your ear canal and allowing for prolonged, all-day wear..
  • , & volume through 2 unique sets of earplugs with variable protection attenuation filters that do not muffle the sound like foam earplugs.
  • with precise triple flange design and cone shaped earplugs tip to fit a range of ear sizes and to ensure a great and lasting seal for your specific needs.
  • & - for better comfort and prolong usage, does not cause itch or allergic reactions like other plastic or PVC materials.
Check Stock

Bailey SA Series Bearing Insert - Radial Insert Ball Bearing for High Speed Applications - Ball Bearing Steel Insert - Spherical OD Eccentric Collar - 1” ID, 2.0472” OD, Steel, 2.56 Ounces, 150854

  • SPECIFICATIONS: Our SA series radial insert ball bearings for agricultural equipment come with an eccentric shroud sleeve, have 1” inner diameter, 2.0472” outer diameter, and are made of steel. The bearing insert weighs 2.56 ounces..
  • PRECISE: The bearing bushing has an eccentric collar that allows high-speed shafts to perform eccentric functions without an eccentric axis. This eccentric bearing offers precision and efficiency in rugged agricultural applications..
  • PROTECTIVE: The eccentric locking collar in the peer bearing can handle a high degree of vibration. These collar bearings protect machinery against damage caused by vibration. These are also double sealed to reduce harm from fibers..
  • STURDY: This independent plain bearing 1 in. id is made from high-quality steel, with precision-hardened inner rings for added strength. It has a high shock absorption capacity and does not crack under pressure. Our bearing collar is made to last..
  • CONVENIENT: These sealed regreasable spherical bearings are simple to use, efficient in operation, and extremely convenient. They are useful in a number of high-speed, high-vibration applications and can be used in rugged conditions with ease..
Check Stock

Martin 9JEM Quadraflex Sleeve, Thermoplastic Rubber, Inch, 6\ OD, 3\ Length

  • For use with specific Martin flange types (J type flanges in the case of JEM and JEMS type sleeves, and all flange types in the case of EM type sleeves) in the Quadra-Flex series flexible coupling assemblies (sold separately).
  • Thermoplastic rubber for resistance to oil and higher temperatures.
  • Three types: one-piece solid (Type JEM), one-piece split (Type JEMS), and two-piece split with a metal retaining ring (Type EM) for applications where the coupled shafts are difficult to separate.
  • Operating temperatures range from -50 to 275 degrees F (-46 to 135 degrees C).
Check Stock

Tanstic 80Pcs 3/16'' x 9/16'' / 3/4'' / 13/16'' / 1\ 4 Sizes Flange Aluminum Blind Rivets Large Head Tri-Fold Exploding Pop Rivets Assortment Kit (Black)

  • Material: Made of high quality aluminum alloy, never rust, good anti-corrosion property, sturdy, light, durable and long life..
  • Rivet Head Size: Diameter 3/16"(4.8mm), Length: 1"(25mm). Large Flange OD: 5/8" (16mm), Grip Range: Diameter 3/16"(4.8mm), Length: 11/16"-3/4"(17.4-19mm).
  • The flange is larger than common type, with larger contact area, can increase torque strength and withstand higher radial tension..
  • Package: 60pcs 4.8x25mm Large Flange Aluminum Blind Rivets.
Check Stock

Ludwig Copper Phonic Smooth Snare Drum 14 x 6.5 in. Raw Smooth Finish with Imperial Lugs

  • Configuration Snare Size: Multiple Sizes Total Pieces: 1 Shells Shell Material: Copper Shell Construction: Rolled Shell Thickness (mm): 1.2 Bearing Edge: 45 Reinforcement Ring: No Hardware Hardware Material: Steel Hoop Type: Triple-flange Lugs: Multiple Throw-Off: Side Internal muffler: No Snares: Steel Other Heads: Branded Case or Bag: Not Applicable Stand: Not Applicable Country of Origin: United States.
  • Raw Smooth Finish with Imperial Lugs With close to century of experience building copper timpani, the newest member to the Ludwig USA snare drum range is the Copper Phonic Hammered snare drum.
  • The first American-made Ludwig snare drum in 20 years offers a 1.
  • 2 mm hammered shell and produces warm tone, powerful attack and dry overtones.
Check Stock

Ludwig Copper Phonic Smooth Snare Drum 14 x 6.5 in. Raw Smooth Finish with Tube Lugs

  • Configuration Snare Size: Multiple Sizes Total Pieces: 1 Shells Shell Material: Copper Shell Construction: Rolled Shell Thickness (mm): 1.2 Bearing Edge: 45 Reinforcement Ring: No Hardware Hardware Material: Steel Hoop Type: Triple-flange Lugs: Multiple Throw-Off: Side Internal muffler: No Snares: Steel Other Heads: Branded Case or Bag: Not Applicable Stand: Not Applicable Country of Origin: United States.
  • Raw Smooth Finish with Tube Lugs With close to century of experience building copper timpani, the newest member to the Ludwig USA snare drum range is the Copper Phonic Hammered snare drum.
  • The first American-made Ludwig snare drum in 20 years offers a 1.
  • 2 mm hammered shell and produces warm tone, powerful attack and dry overtones.
Check Stock

Ludwig Copper Phonic Smooth Snare Drum 14 x 5 in. Smooth Finish with Imperial Lugs

  • Configuration Snare Size: Multiple Sizes Total Pieces: 1 Shells Shell Material: Copper Shell Construction: Rolled Shell Thickness (mm): 1.2 Bearing Edge: 45 Reinforcement Ring: No Hardware Hardware Material: Steel Hoop Type: Triple-flange Lugs: Multiple Throw-Off: Side Internal muffler: No Snares: Steel Other Heads: Branded Case or Bag: Not Applicable Stand: Not Applicable Country of Origin: United States.
  • Smooth Finish with Imperial Lugs With close to century of experience building copper timpani, the newest member to the Ludwig USA snare drum range is the Copper Phonic Hammered snare drum.
  • The first American-made Ludwig snare drum in 20 years offers a 1.
  • 2 mm hammered shell and produces warm tone, powerful attack and dry overtones.
  • This drum is fitted with Imperial or tube lugs and 2.
Check Stock