Top Flanged Sleeve Couplings

The Drum That Beats Within Us

  • Bass drums include telescopic bass drum spurs and matching maple wood bass drum hoops. Toms and snare drums feature 2.3mm triple flanged hoops. All drums are fitted with Remo drum heads.
  • Mounting Hardware: Low profile GTS tom suspension system.
  • Low-profile tom and floor tom leg brackets.
  • Gretsch T-Wing nut/bolt & "Gas cap" bass drum mount plate with "G" memory lock.
  • Hoops - Snare: 2.3mm triple flanged, Toms: 2.3mm triple flanged & Bass: Maple with matching lacquer or wrap inlay.
Check Stock

Westinghouse Lighting 70272 7027200 12" Lamp Pipe Kit, 1 Pack, Yellow

  • 12, all thread lamp pipe Kit, zinc plated steel, includes two: 1/8Iron pipe x 12Threaded pipe, two 1/8Iron pipe couplings.
  • Contains two each: 1/8-IP x 12″ threaded pipe, 1/8-IP couplings, 1/8-IP locknuts, 1/8-IP knurled locknuts, washers.
Check Stock

JSM Bicycle Hub Flanged Axle Nut and Safety Washer Kit, 3 Size for Front and Back Bike Wheel

  • It is made of high strength steel with antirust treatment.
  • Includes 6 sets of 3-size flange nuts and safety washers(for both Metric and British System), suitable for most bicycle replacements.
  • Spec: NUT WM FRT 5/16x26 FLANGED(2 sets), NUT WM FRT 3/8x26FLANGED(2 sets), Metric NUT FLANGED M10*1(2 sets).Please refer to picture.
Check Stock

DW Performance Series 4-Piece Shell Pack with 22 Inches Bass Drum - Gold Sparkle FinishPly

  • 4-piece Maple Shell Pack with 10" and 12" Toms, 16" Floor Tom, and 22" Bass Drum - Gold Sparkle FinishPly.
  • Performance Series Bass Drum - 18 x 22 inch - Gold Sparkle FinishPly: 22" Maple Bass Drum with Maple Hoops - Gold Sparkle FinishPly.
  • Performance Series Floor Tom - 14 x 16 inch - Gold Sparkle FinishPly: 16" Maple Floor Tom with 2.3mm Triple-flanged Hoops - Gold Sparkle FinishPly.
  • Performance Series Mounted Tom - 9 x 12 inch - Gold Sparkle FinishPly: 12" Maple Tom with 2.3mm Triple-flanged Hoops - Gold Sparkle FinishPly.
  • Performance Series Mounted Tom - 8 x 10 inch - Gold Sparkle FinishPly: 10" Maple Tom with 1.6mm Triple-flanged Hoops - Gold Sparkle FinishPly.
Check Stock

MJR Tumblers 20 LB Rock Tumbler Awarded Best High End, Most Versatile Run 19 Dif Barrel Combinations

  • Heavy duty 16 gauge welded steel frame, powder coated to be scratch and corrosion resistant.
  • Rubber coated 1/2" diameter steel rollers.
  • Industrial duty flanged STAINLESS STEEL BALL BEARINGS (no plastic sleeve bearings to wear out).
  • Heavy duty motor with automatic thermo overload protection - intended for continuous use.
  • Commercial grade plastic barrel that seals to be water and air tight, tapered neck for easy loading and unloading.
Check Stock

MJR Tumblers 20 LB Rock Tumbler Awarded Best High End, Most Versatile Run 19 Dif Barrel Combinations

  • Heavy duty 16 gauge welded steel frame, powder coated to be scratch and corrosion resistant.
  • Rubber coated 1/2" diameter steel rollers.
  • Industrial duty flanged STAINLESS STEEL BALL BEARINGS (no plastic sleeve bearings to wear out).
  • Heavy duty motor with automatic thermo overload protection - intended for continuous use.
  • Commercial grade plastic barrel that seals to be water and air tight, tapered neck for easy loading and unloading.
Check Stock

MJR Tumblers 18 LB Rock Tumbler Awarded Best High End, Most Versatile Run 19 Dif Barrel Combinations

  • Heavy duty 16 gauge welded steel frame, powder coated to be scratch and corrosion resistant.
  • Rubber coated 1/2" diameter steel rollers.
  • Industrial duty flanged STAINLESS STEEL BALL BEARINGS (no plastic sleeve bearings to wear out).
  • Heavy duty motor with automatic thermo overload protection - intended for continuous use.
  • Commercial grade plastic barrel that seals to be water and air tight, tapered neck for easy loading and unloading.
Check Stock

MJR Tumblers 10 LB Rock Tumbler Awarded Best High End, Most Versatile Run 4 Dif Barrel Combinations

  • Heavy duty 16 gauge welded steel frame, powder coated to be scratch and corrosion resistant.
  • Rubber coated 3/8" diameter steel rollers.
  • Industrial duty flanged STAINLESS STEEL BALL BEARINGS (no plastic sleeve bearings to wear out).
  • Heavy duty motor with automatic thermo overload protection - intended for continuous use.
  • Commercial grade plastic barrel that seals to be water and air tight, tapered neck for easy loading and unloading.
Check Stock

MJR Tumblers 25 LB Rock Tumbler Awarded Best High End, Most Versatile Run 19 Dif Barrel Combinations

  • Heavy duty 16 gauge welded steel frame, powder coated to be scratch and corrosion resistant.
  • Rubber coated 1/2" diameter steel rollers.
  • Industrial duty flanged STAINLESS STEEL BALL BEARINGS (no plastic sleeve bearings to wear out).
  • Heavy duty motor with automatic thermo overload protection - intended for continuous use.
  • Commercial grade plastic barrel that seals to be water and air tight, tapered neck for easy loading and unloading.
Check Stock

MJR Tumblers 40 LB Rock Tumbler Awarded Best High End, Most Versatile Run 19 Dif Barrel Combinations

  • Heavy duty 16 gauge welded steel frame, powder coated to be scratch and corrosion resistant.
  • Rubber coated 1/2" diameter steel rollers.
  • Industrial duty flanged STAINLESS STEEL BALL BEARINGS (no plastic sleeve bearings to wear out).
  • Heavy duty motor with automatic thermo overload protection - intended for continuous use.
  • Commercial grade plastic barrel that seals to be water and air tight, tapered neck for easy loading and unloading.
Check Stock

Dixon PML12 Plated Steel Dual Lock Quick Acting Air Hose Fitting with Locking Sleeve, Socket, 1/2\ Coupling x 3/4\ NPT Male

  • Interchanges with Dixon Quick Coupling P type and Thor PHC series couplings.
  • PM series must be used with mating locking sleeve fittings.
Check Stock

Tsubaki (UST) 6018F 1 3/16 Chain Coupling Hub - 60 Chain, 18 Teeth, 1-3/16 in Finshed Bore

  • For use with Martin Quadra-Flex series flexible couplings (sold separately).
  • Cast iron for non-corrosive applications where strength and heat dissipation are factors and weight is not.
  • Transfers shock and misalignment to the center element of the coupling assembly for reduced wear on the shaft assembly.
  • Teeth help to distribute torsional load across the flange and sleeve, reducing wear and extending service life.
Check Stock