Top Flanged Slewing Ring

DW Performance Series 4-Piece Shell Pack with 22 Inches Bass Drum - Gold Sparkle FinishPly

  • 4-piece Maple Shell Pack with 10" and 12" Toms, 16" Floor Tom, and 22" Bass Drum - Gold Sparkle FinishPly.
  • Performance Series Bass Drum - 18 x 22 inch - Gold Sparkle FinishPly: 22" Maple Bass Drum with Maple Hoops - Gold Sparkle FinishPly.
  • Performance Series Floor Tom - 14 x 16 inch - Gold Sparkle FinishPly: 16" Maple Floor Tom with 2.3mm Triple-flanged Hoops - Gold Sparkle FinishPly.
  • Performance Series Mounted Tom - 9 x 12 inch - Gold Sparkle FinishPly: 12" Maple Tom with 2.3mm Triple-flanged Hoops - Gold Sparkle FinishPly.
  • Performance Series Mounted Tom - 8 x 10 inch - Gold Sparkle FinishPly: 10" Maple Tom with 1.6mm Triple-flanged Hoops - Gold Sparkle FinishPly.
Check Stock

12\x12\x1\ Ceramic Fiber Blanket Insulation 6# 2300F for Wood Stoves, Pizza Ovens, Kilns, Forges, Fireplaces & More - (6 Pack)

  • SSS style 913M, 316 stainless steel spiral wound gaskets with 316 stainless steel inner ring are a precision-engineered sealing solution for flat and raised face flanges and flanged joints.
  • Style 913M gaskets supplied by Sterling Seal & Supply Are also suitable for heat exchangers, boiler hand holes, manholes, and other high-temperature, high-pressure applications.
  • Gasket identification markings required by ASME B16.20 clearly etched in all gaskets. These gaskets excel in the prevention of flange erosion, inward buckling and reduction of turbulent flow.
  • Installation tip: spiral wound gaskets with internal or external guide Rings should be fully compressed to the guide ring. This will NOT damage the gasket or affect the sealing performance.
  • Installation tip: check that flange faces are clean and in good condition. Ensure correct bolting material is utilized to suit the operating conditions, and the use of Bolt lubrication is employed.
Check Stock

24\x24\x1\ Ceramic Fiber Blanket Insulation 6# 2300F for Wood Stoves, Pizza Ovens, Kilns, Forges, Fireplaces & More - (4 Each)

  • SSS style 913M, 316 stainless steel spiral wound gaskets with 316 stainless steel inner ring are a precision-engineered sealing solution for flat and raised face flanges and flanged joints.
  • Style 913M gaskets supplied by Sterling Seal & Supply Are also suitable for heat exchangers, boiler hand holes, manholes, and other high-temperature, high-pressure applications.
  • Gasket identification markings required by ASME B16.20 clearly etched in all gaskets. These gaskets excel in the prevention of flange erosion, inward buckling and reduction of turbulent flow.
  • Installation tip: spiral wound gaskets with internal or external guide Rings should be fully compressed to the guide ring. This will NOT damage the gasket or affect the sealing performance.
  • Installation tip: check that flange faces are clean and in good condition. Ensure correct bolting material is utilized to suit the operating conditions, and the use of Bolt lubrication is employed.
Check Stock

NTN ASPF205-100 Light Duty Flange Bearing, 3 Bolts, Setscrew Lock, Non-Relubricatable, Contact Seals, Pressed Steel, Inch, 1\ Bore, 2-63/64\ Bolt Hole Spacing Width, 3-3/4\ Height, 1770 Static Load Capacity, 3150 Dynamic Load Capacity

  • Pressed steel flanged housing for light-duty applications with low to moderate speeds.
  • Light-duty, double-sealed radial ball bearing insert with a narrow inner ring accepts moderate radial loads and light thrust or combination loads.
  • Synthetic rubber lip contact seals on both sides of the bearing keep lubricant in and contaminants out.
  • Setscrew lock for a three-point contact hold on the shaft.
  • Extended inner ring for increased shaft support.
Check Stock

15 Amp Flanged Inlet, TOVEN 125V RV Shore Power Inlet NEMA 5-15 Plug RV Receptacle with Waterproof Integrated 18\ Extension Cord & Cover Marine Electrical Inlet ETL Approved

  • 【15 Amp Flanged Inlet】: The flanged inlet material is premium copper and black nylon plastic. None oxidation for the copper pole on the plug. It can avoid ultraviolet degradation and Rain erosion. It is very sturdy and durable, which can work perfectly both indoor and outdoor.
  • 【Weatherproof Design】: Our 15 amp inlet is ETL approved, which means it is the safest quality. The newest weatherproof design back cover will protect it from rainstorms, snow, dust and even works well without crack and leak in the coldest winters..
  • 【Widely Compatible】: This shore power inlet Is a generator or battery charger plug to energize your several electrical devices and electrical appliances at the same time. Widely used in the RV, trailer, camper, car, boat, marine, block heater, home, recessed outlet box, etc.
  • 【Easy Installation】: The flanged power inlet needs 1-3 / 4" hole size, use 4 stainless steel screws (package Include) to firmly fix the straight blade flange entrance on the wall. The male receptacle was equipped with 14AWG 18 inch extension cable. Just need to plug in to connect the power..
  • 【The Wire Up As You Wish】: Choose the length and diameter of the cord based on your need. The Flanged electrical inlet receptacle accommodates 12-18 AWG gauge....
Check Stock

WELLUCK 15 Amp Flanged Inlet 125V, NEMA 5-15 RV Shore Power Inlet Plug w/Waterproof and Back Cover, 2 Pole 3-Wire AC Port Plug, Generator Male Receptacle for Marine Boat RV Shed Electrical Extension

  • 【15 Amp Flanged Inlet】: No oxidation for the Nickel coated copper pole on the plug, made of premium copper and Nylon plastic to avoid the damage of UV degradation and chemicals, rugged and durable for indoor and outdoor..
  • 【Easy Reliable Installation】: 2" Hole size required, clear see-thru wiring block (Black-Hot, Green-Ground, Silver-Neutral), and 4 long Stainless Steel screws will fix straight blade flanged inlet on the hole or wall more tightly. No gap on the edge!.
  • 【 Weatherproof Cover】: ETL approved, and the flanged power inlet cap and back cover will protect it from the rain storm, snows, dust and even works well in Western Colorado winters, without crack and leak..
  • 【Wire Up As You Wish】 : Define the Length and Diameter of the cord based on actual need. Flanged electrical inlet receptacle accommodates 12-18 AWG gauge wires, suitable for No. 12-3 through No. 18-3 cords grip..
  • 【Widely Compatible】: As a generator or battery charger plug to energize your electrical devices. Widely used in trailer, camper, RV, car, boat, marine, block heater,home, bumper, recessed outlet box, etc.
Check Stock

Gretsch CM1E826PWG 2014 Catalina Maple 7-Piece Rock Shell Pack and 22 Inch Kick with Free Additional 8 Inch Tom - Walnut Claze

  • Bass drums include telescopic bass drum spurs and matching maple wood bass drum hoops. Toms and snare drums feature 2.3mm triple flanged hoops. All drums are fitted with Remo drum heads.
  • Mounting Hardware: Low profile GTS tom suspension system.
  • Low-profile tom and floor tom leg brackets.
  • Gretsch T-Wing nut/bolt & "Gas cap" bass drum mount plate with "G" memory lock.
  • Hoops - Snare: 2.3mm triple flanged, Toms: 2.3mm triple flanged & Bass: Maple with matching lacquer or wrap inlay.
Check Stock

The Muppet Show Animal Playing Dw Drums Cute Funny Graphic Fashion T Shirt Gift for Men Top Men s Co DMN Tee Black

  • 4-piece Maple Shell Pack with 10" and 12" Toms, 16" Floor Tom, and 22" Bass Drum - Gold Sparkle FinishPly.
  • Performance Series Bass Drum - 18 x 22 inch - Gold Sparkle FinishPly: 22" Maple Bass Drum with Maple Hoops - Gold Sparkle FinishPly.
  • Performance Series Floor Tom - 14 x 16 inch - Gold Sparkle FinishPly: 16" Maple Floor Tom with 2.3mm Triple-flanged Hoops - Gold Sparkle FinishPly.
  • Performance Series Mounted Tom - 9 x 12 inch - Gold Sparkle FinishPly: 12" Maple Tom with 2.3mm Triple-flanged Hoops - Gold Sparkle FinishPly.
  • Performance Series Mounted Tom - 8 x 10 inch - Gold Sparkle FinishPly: 10" Maple Tom with 1.6mm Triple-flanged Hoops - Gold Sparkle FinishPly.
Check Stock

Ludwig Supralite Steel Snare Drum 14 x 8 in.

  • 3mm triple-flanged hoops and brass snare wires.
Check Stock

Old Mountain 10178 Pre Seasoned 12-Quart Dutch Oven with Flanged Lid, No Feet

  • Old mountain logo embossed on flanged lid.
  • Flanged lid to hold coals for even camp cooking.
  • Versatile flat bottom for ease of use in kitchen and oven.
Check Stock

Toilet Wax Ring Kit with Flexible Flange and Bolts for Toilet Bowl- Gas, Odor and Watertight Seal, Fit Toilet Install & Repair - Easy to Install

  • Perfect Seal: Toilet flange with wax ring features thickness and durability, the toilet seal for installation of new floor mount toilet install or repair old toilet. The included polyethylene flanged sleeve extends the discharge opening and provides a positive seal..
  • Premium Quality: The toilet replacement parts made in high-quality plastic, rubber and polyethylene, hold its shape throughout time without breaking, and perfect solution to deal with unpleasant odors and leaks caused by every toilet flush..
  • Easy to Install: You without tools to install it, ready for use at 70°F temperature. Please refer to the accompanying instructions for specific installation steps..
  • Polyethylene flange fits 3-inch and 4-inch waste line: This wax ring for toilet can be used with 3-inch and 4-inch waste lines/ drain opening, being the perfect alternative whether for new installations or for securing or replacing your old toilet bowl..
  • Service: Hibbent provide 100% customer support and 30 days money back guarantee. If you have any questions, please touch us in time..
Check Stock

Loctite 515 Gasket Maker & Flange Sealant for Automotive: High Temp, Medium-Strength, Anaerobic | Purple, 50mL (PN: 555352)

  • RELIABLE ADHESION. Works on all metals, including passive substrates (e.g. stainless steel, aluminum, plated surfaces) & tolerates minor contamination by oils (e.g. motor oils, corrosion protection oils, cutting fluids)..
  • FLEXES WITH MOVEMENT. Adds flexibility to rigid machined flanges that move in service & eliminates the need for preformed, paper, rubber & cork gaskets..
  • EASILY REMOVABLE. Well suited for automotive and other applications such as water pumps, thermostat housings, transmission pans, transmission case covers, transaxle casings, O-ring replacement..
  • CONVENIENT CURING. With primer, sets in 15m – 2hrs. Without primer, sets in 1-12hrs..
  • LOCTITE 515 is designed for close fitting flanged parts with gaps up to 0.25 mm (0.01 in)..
Check Stock