Top Flanged Spigot

DW Performance Series 4-Piece Shell Pack with 22 Inches Bass Drum - Gold Sparkle FinishPly

  • 4-piece Maple Shell Pack with 10" and 12" Toms, 16" Floor Tom, and 22" Bass Drum - Gold Sparkle FinishPly.
  • Performance Series Bass Drum - 18 x 22 inch - Gold Sparkle FinishPly: 22" Maple Bass Drum with Maple Hoops - Gold Sparkle FinishPly.
  • Performance Series Floor Tom - 14 x 16 inch - Gold Sparkle FinishPly: 16" Maple Floor Tom with 2.3mm Triple-flanged Hoops - Gold Sparkle FinishPly.
  • Performance Series Mounted Tom - 9 x 12 inch - Gold Sparkle FinishPly: 12" Maple Tom with 2.3mm Triple-flanged Hoops - Gold Sparkle FinishPly.
  • Performance Series Mounted Tom - 8 x 10 inch - Gold Sparkle FinishPly: 10" Maple Tom with 1.6mm Triple-flanged Hoops - Gold Sparkle FinishPly.
Check Stock

Good Ideas IMP-N50-DBR Impressions Nantucket Rain Saver Rain Barrel, 50 Gallon, Dark Brown

  • 50 Gallon capacity rain barrel and 4 inch planter top.
  • Wicker finish adds class and style to your rain harvesting.
  • Meshed screen blocks debris from entering your water supply.
  • Dual spigot locations for hose or five gallon bucket-Brass spigot will not rust or break like plastic alternatives.
Check Stock

Renator Brass Rain Barrel Spigot Kit. Lead-Free Compliant. 3/4 Inch Quarter Turn Ball Valve. Rain Barrel Kit For Any Barrel Including 5 55 Gallon Drum Spigot Bucket. Spigot with Bulkhead Fitting, Tape

  • A QUALITY SPIGOT DESIGNED FOR MAXIMUM WATER FLOW. Make use of the water collected from your rain barrel easily and quickly. This spigot was specifically designed with a larger flow port to fully take advantage of water pressure in your rain barrel to produce superior water flow. The 3/4" spigot is threaded for easy use with a hose- no need to haul buckets or watering cans..
  • NO LEAKS. The attached washer and silicone tape provide a perfect waterproof seal, and the bulkhead fitting and spigot are reverse-threaded, and self tighten- which ensures the spigot will not accidentally loosen from use, and will hold a tight seal over multiple seasons..
  • INSTALLATION SO QUICK, YOU'LL BARELY HAVE TIME TO GET YOUR DRILL OUT. The bulkhead fitting and spigot are reverse-threaded, and are tightened from the outside of the barrel- no need to fiddle inside with a wrench. Simply drill a hole, and thread the attached wire down through the hole then slide the bulkhead fitting down the wire as a guide- works well for barrels with and without open top design. The product also comes with a detailed, illustrated guide..
Check Stock

Replacement Spigot for Beverage Dispenser,Push Style Spigots ,Water Dispenser Replacement Spout Silver 2 Pack

  • Food Grade: The beverage dispenser spigot is made of high quality plastic, food grade..
  • Installation size: spigot is suitable for openings of 16mm or 5/8 inch, and the wall thickness does not exceed 17mm or 11/16 inch.
  • Beautiful and affordable: The spigot surface is electroplated, beautiful and practical. Plastic has excellent stability, acid and alkali resistance, and is affordable..
  • Product Content: Two beverage dispensers spigot, two silicone waterproof gaskets, two plastic nuts..
  • Good after sales: If you have any problem with the product, please contact us for a refund or exchange.
Check Stock

Replacement Spigot Spout for Beverage Dispenser, Solid Stainless Steel Water Dispenser Replacement Faucet with Anti-Clogging Cap Polished Finished

  • Quick Installation-This Beverage Dispenser Spigot requires 5/8 inch or 16mm diameter opening to install. It fits dispenser wall up to 11/16 inch or 17mm thick and for flat surface can fit up to 1 inch hole..
  • High Quality-This beverage spigot is made up of food-grade 304 stainless steel and Come with stainless steel Anti-Clogging Cap, no lead and it will not rust..
  • Multi-Function-This beverage spigot is great for use in beverage dispenser, wine barrel, beer equipment, coffee machine and other drink dispenser..
  • Heavy Duty-This stainless steel spigot is solid and heavy duty. It is designed to replace those cheap, easy break and leak plastic spigots of drink dispenser, beverage dispenser jar or sun tea jar..
  • Lifetime Warranty-Lifetime replacement guarantee, the only beverage/tea jar urn spigot replacement you need to buy. Keep contact info on packing for warranty purpose..
Check Stock

STYDDI Solid Brass Rain Barrel Spigot, Quarter Turn Ball Valve Faucet with Heavy-Duty Bulkhead Fitting Adapter for Aquariums, Water Tanks, Tubs, Pools

  • A MUST HAVE FOR RAIN BARREL DIY LOVERS - Rain barrel DIY lovers would obviously want to find a better unit of water spigot that provides an efficient water flow at variable pressure without getting affected by the number of usages and weather conditions. Now they do not have to invest their valuable time to search for such a water spigot because here it is..
  • ALL SOLID BRASS CONSTRUCTION FOR DURABILITY - This is a heavy-duty brass quarter turn water spigot, specifically designed for rain barrels. The all brass construction including solid brass bulkhead fitting makes it a excellent pick for long-term use. Coming complete with water-proof washers and solid brass nuts, which is perfect for DIY rain barrels or replacement applications..
  • PACKAGE INCLUDED - This rain barrel spigot kit includes a 1-1/8 inch brass rain barrel quarter turn ball valve spigot and a 3.14 oz brass bulkhead fitting with 1-1/8 inch female thread. The thread of the water spigot input is 1/2" NPT Male, while the output thread is 3/4" GHT Male compatible for any garden hoses. It also comes with a seal tape and two water-proof washers..
Check Stock

15 Amp Flanged Inlet, TOVEN 125V RV Shore Power Inlet NEMA 5-15 Plug RV Receptacle with Waterproof Integrated 18\ Extension Cord & Cover Marine Electrical Inlet ETL Approved

  • 【15 Amp Flanged Inlet】: The flanged inlet material is premium copper and black nylon plastic. None oxidation for the copper pole on the plug. It can avoid ultraviolet degradation and Rain erosion. It is very sturdy and durable, which can work perfectly both indoor and outdoor.
  • 【Weatherproof Design】: Our 15 amp inlet is ETL approved, which means it is the safest quality. The newest weatherproof design back cover will protect it from rainstorms, snow, dust and even works well without crack and leak in the coldest winters..
  • 【Widely Compatible】: This shore power inlet Is a generator or battery charger plug to energize your several electrical devices and electrical appliances at the same time. Widely used in the RV, trailer, camper, car, boat, marine, block heater, home, recessed outlet box, etc.
  • 【Easy Installation】: The flanged power inlet needs 1-3 / 4" hole size, use 4 stainless steel screws (package Include) to firmly fix the straight blade flange entrance on the wall. The male receptacle was equipped with 14AWG 18 inch extension cable. Just need to plug in to connect the power..
  • 【The Wire Up As You Wish】: Choose the length and diameter of the cord based on your need. The Flanged electrical inlet receptacle accommodates 12-18 AWG gauge....
Check Stock

Red-Headed Gooseberry Ghost (Haunted House Storybook)

  • FITS ALL STANDARD FAUCET AND GARDEN HOSES - Easy turn swivel connector on hose adapter attaches quickly to standard spigot or hose connection. Connects this garden hose splitter to the spigot easily with the wide black grip. No wrench or pliers needed..
  • SOLID BRASS FOR LONG USE WITHOUT LEAKAGE OR CORROSION - Heavy-duty and eco-friendly solid brass construction make the hose connector support up to 0.8MPa pressure without leakage and last from season to season without rust. Extra 6 rubber washers included to prevent the water hose splitter from leaking..
  • SPLIT 1 SPIGOT INTO 2 OUTLETS AND MORE - Run 2 hoses from the same spigot with 2 way heavy duty hose splitter, and you can even connect more hoses to your backyard sink, drip irrigation, sprinkler timer system, hose end tap timer with more faucet splitter. Made for home, garden and backyard use..
  • EASY-TO-TURN INDIVIDUAL VALVES & COMFORTABLE GRIP - Covered with thermoplastic rubber for easy grip and operation, the valves on the brass hose y splitter allow you to control the flow separately and easily without going back and forth to the source..
  • EFFICIENT AFTER SALE SERVICE- With IPOW Hose Splitter, easily taking care of plants, showering pets, washing car, cleaning house and more situations without switchi....
Check Stock

Stainless Steel Spigot for Beverage Dispenser Faucet – Water Dispenser Metal Spout Replacement Beverage Spigot – Drink Dispenser Spigot Kombucha

  • REPLACeMENT STAINLESS STEEL SPIGOT: Our water dispenser spigot will keep your beverage dispenser running smoothly with a quarter turn faucet, stainless steel body and anti-clog filter. Fits Most Standard Beverage Dispensers.
  • LEAKPROOF WATER SPOUT: Each beverage dispenser faucet set includes 2 classic washers and an H-shape washer made from food-grade silicone to provide a tight, leak proof fit. Fits 0.625” (16 mm) to 0.67” (17mm) openings.
  • SCREEN FILTER: To prevent any clogging or blockage in the replacement spigot, each kit includes a removable Anti-Clog Screen Filter. Ideal for worry-free dispensing of lemonade, tea, kombucha, wine, juice, flavored water or sangria.
  • STAINLESS SPOUT: Made from food-grade stainless steel, this durable drink spigot features an easy-to-use lever, wide dispenser nozzle and polished metal finish. Corrosion-resistant, rust-resistant and easy to clean.
  • KIT INCLUDES: Stainless Steel Spigot, 2 Metal Washers, 2 Silicone Washers, H-shape Washer, Removable Mesh Filter Cap and Wrench.
Check Stock

Insulated Beverage Dispenser, Drink Dispenser

  • 【MATERIAL】Our hot insulated beverage dispenser with spigot is made of high-quality double-layer stainless steel liner, safe and hygienic, combined with polyurethane foam material to make the heat preservation performance better. Reserved for the original flavor and nutrients of the beverage..
  • 【FUNCTION-KEEP HOT AND COLD BEVERAGES】 This beverage dispenser does not have a heating function but keeps hot and cold beverages for hours.Our drink dispenser with spigot is perfect for serving coffee, tea, hot cider, hot chocolate and more for banquets, church functions, corporate events and christmas party..
  • 【FOLDABLE LEGS DESIGN 】Our insulated beverage dispenser is especially designed as foldable legs ,which is convenient for you use flexibly. If you have any other questions about our hot and cold insulated beverage dispenser with spigot , please contact us and we will reply you as soon as possible..
  • 【CONVENIENT】The hot and cold drink dispenser with stainless steel outer and inner body, and the insulated beverage dispenser with spigot is convenient to carry. In addition, hot and cold beverage dispenser with heavy-duty handle enables it to be easily moved from one location to another..
  • 【LARGE CAPACITY & INTELLIGENT DESIGN】Our insulated bev....
Check Stock

2 PACK 7.9 Gallons (30 L) Plastic Bucket Fermenter with Spigot, Grommeted Airtight Lid, 3 Piece Airlock for Beer, Wine, Mead, Kombucha Fermenting

  • This is a set of 2, 7.9 gallon plastic fermenter complete with lid, airlock, and spigot..
  • These buckets are made from Polypropylene and are ideal for all types of fermentations, especially beers with high krausen.003c/p003e.
  • Set Includes: (2) 7.9 gallon plastic bucket, (2) Plastic lid with hole and grommet, (2) 3 Piece Airlock, (2) Spigot.
  • Included spigot eliminates need to siphon.
  • The bucket comes pre-drilled and threaded, ready for the spigot to be screwed in..
Check Stock

WELLUCK 15 Amp Flanged Inlet 125V, NEMA 5-15 RV Shore Power Inlet Plug w/Waterproof and Back Cover, 2 Pole 3-Wire AC Port Plug, Generator Male Receptacle for Marine Boat RV Shed Electrical Extension

  • 【15 Amp Flanged Inlet】: No oxidation for the Nickel coated copper pole on the plug, made of premium copper and Nylon plastic to avoid the damage of UV degradation and chemicals, rugged and durable for indoor and outdoor..
  • 【Easy Reliable Installation】: 2" Hole size required, clear see-thru wiring block (Black-Hot, Green-Ground, Silver-Neutral), and 4 long Stainless Steel screws will fix straight blade flanged inlet on the hole or wall more tightly. No gap on the edge!.
  • 【 Weatherproof Cover】: ETL approved, and the flanged power inlet cap and back cover will protect it from the rain storm, snows, dust and even works well in Western Colorado winters, without crack and leak..
  • 【Wire Up As You Wish】 : Define the Length and Diameter of the cord based on actual need. Flanged electrical inlet receptacle accommodates 12-18 AWG gauge wires, suitable for No. 12-3 through No. 18-3 cords grip..
  • 【Widely Compatible】: As a generator or battery charger plug to energize your electrical devices. Widely used in trailer, camper, RV, car, boat, marine, block heater,home, bumper, recessed outlet box, etc.
Check Stock