Top Flanges Series

Willow Pump Willow Go™ Wearable Breast Pump Flange Set, 2 Pack | Breast Shield for Hands Free, Cord Free Double Electric Breast Pump | Clear, 24mm

  • REUSABLE FLANGES: Flanges are clear colored for nipple visibility and alignment for easy placement and fast assembly to ensure effective suction. Flanges are reusable, but should be replaced every 3 months for optimal performance..
  • HANDS FREE PUMPING: Completely mobile and hands-free & easy to assemble – everything fits inside the pump without cords or attachments. This breast feeding accessory gives you the ability to pump directly into Willow Go Reusable Breast Milk Containers and easily transfer to a storage container or bottle when you’re ready to feed..
  • AVAILABLE IN 3 SIZES: Reference our sizing chart (pictured) to determine your size for optimal pumping experience. Flanges come in three sizes: 21mm, 24mm, and 27mm. In addition, 24mm flanges are compatible with sizing inserts for mamas who measure smaller than 21mm..
  • EASY TO CLEAN: Dishwasher-safe for easy cleanup..
  • USE WITH THE WILLOW GO PUMP: Exclusively designed to work with the Willow Go Wearable Breast Pump..
Check Stock

Maymom Flange Inserts 19 mm for Medela, Spectra 24 mm Shields/Flanges, Momcozy/Willow Wearable Cup. Compatible with Medela Freestyle, Harmony to Reduce 24mm Nipple Tunnel Down to 19 mm; 2pc/Each

  • Maymom 19 mm inserts (Long) compatible with Medela PersonalFit/Spectra 24 mm shields. It will reduce the 24-mm shield nipple tunnel down to 19 mm. Also compatible with Momcozy/LegendaryMilk/Tsrete Wearable 24mm silicone cups..
  • Maintain compatibility with most handsfree bra – Based on the Medela PersonalFit system. You can use most handsfree bra with your original 24 mm detachable shields having this insert inside..
  • Can be compatible with Spectra 24mm flanges, Ameda Purely Yours 25mm flanges, Ameda Mya Joy 25mm flanges, Willow 24mm flanges, Lansino 24mm flanges. Momcozy S9/S10/S12 Wearable Breastpump 24 mm cups (not for 27 mm cups).
  • Also fits freemie 25 mm cup to reduce its nipple tunnel.
Check Stock

Martin 9HS Quadraflex Sleeve, Hytrel, Inch, 6\ OD, 3\ Length

  • For use with specific Martin flange types (J type flanges in the case of JEM and JEMS type sleeves, and all flange types in the case of EM type sleeves) in the Quadra-Flex series flexible coupling assemblies (sold separately).
  • Thermoplastic rubber for resistance to oil and higher temperatures.
  • Three types: one-piece solid (Type JEM), one-piece split (Type JEMS), and two-piece split with a metal retaining ring (Type EM) for applications where the coupled shafts are difficult to separate.
  • Operating temperatures range from -50 to 275 degrees F (-46 to 135 degrees C).
Check Stock

Martin 9JEM Quadraflex Sleeve, Thermoplastic Rubber, Inch, 6\ OD, 3\ Length

  • For use with specific Martin flange types (J type flanges in the case of JEM and JEMS type sleeves, and all flange types in the case of EM type sleeves) in the Quadra-Flex series flexible coupling assemblies (sold separately).
  • Thermoplastic rubber for resistance to oil and higher temperatures.
  • Three types: one-piece solid (Type JEM), one-piece split (Type JEMS), and two-piece split with a metal retaining ring (Type EM) for applications where the coupled shafts are difficult to separate.
  • Operating temperatures range from -50 to 275 degrees F (-46 to 135 degrees C).
Check Stock

Ideal Tridon 5620051 Stainless Steel Quick Release Clamp with Steel Screw, 3/4\ to 1-3/4\ Diameter, 9/16\ W (Pack of 10)

  • Features a Quick Release T-Bolt to allow quick and easy installation without having to fully disassemble the clamp..
  • The clamp is made of 100% 304 stainless steel for excellent weather and corrosion resistance..
  • HPS 304 Stainless Steel Flanges feature a male and female side to automatically align the flanges onto each other to eliminate improper installation..
  • The back side of HPS V-Band flanges feature a recessed lip to help center your stainless steel tubing to the flange and allow unrestricted air flow..
  • HPS Stainless Steel V-Band Clamp Kit with Stainless Steel Flanges includes 304 Stainless Steel Quick Release V-Band Clamp, Male/Female Stainless Steel V-Band Flange Set, Non-locking Nut and Self-locking Nut.
Check Stock

Martin 8JEM Quadraflex Sleeve, Thermoplastic Rubber, Inch, 5.063\ OD, 2.5\ Length

  • For use with specific Martin flange types (J type flanges in the case of JEM and JEMS type sleeves, and all flange types in the case of EM type sleeves) in the Quadra-Flex series flexible coupling assemblies (sold separately).
  • Thermoplastic rubber for resistance to oil and higher temperatures.
  • Three types: one-piece solid (Type JEM), one-piece split (Type JEMS), and two-piece split with a metal retaining ring (Type EM) for applications where the coupled shafts are difficult to separate.
  • Operating temperatures range from -50 to 275 degrees F (-46 to 135 degrees C).
Check Stock

BLACKHORSE-RACING 3 Inch 76mm Stainless Steel V Band Bolt Clamp with 2 Male Female Flanges for Turbo Pipes SS V-Band Flange Kit

  • ▲ 3 INCH STAINLESS STEEL EXHAUST CLAMP KIT – Complete V-band kit is ideal for performance exhaust systems, catback exhausts, turbo back exhausts and more..
  • ▲ COMPLETE 3 PIECE KIT – This complete 3inch Vband kit includes 1x 3″ V-Band clamp which is designed to accommodate the 2x stainless steel 3″ Vband flanges.
  • 1 male flange and 1 female flange. This allows for the flanges to properly align during installation to insure a leak free seal..
  • ▲ DESIGNED FOR 3″ EXHAUST PIPES – This kit is specifically designed for 3″ exhaust pipes. The flanges feature a recessed opening which allows for a 3″ exhaust to easily slip inside the flange, providing a perfect overlap seam for welding..
  • ▲ PERFECT FOR TURBO AND HIGH HORSEPOWER VEHICLES – If you’re making a catback exhaust, turbo back exhaust, mid pipe, or up pipe for your car, truck, or other vehicle this V-band kit is ideal for connecting different pipe sections. Conventional exhaust flanges multiple nuts, bolts, washers and a gasket. A V-band kit eliminates all of these and allows for a connection with a single nut..
  • ▲ EASY ON, EASY OFF – A V-band kit allows you to connect or disconnect sections of your exhaust by removing a single nut. Conventionally exhaust flanges involve multiple ....
Check Stock

Martin 6EM Quadraflex Sleeve, Thermoplastic Rubber, Inch, 1.875\ OD, 1.875\ Length

  • For use with specific Martin flange types (J type flanges in the case of JEM and JEMS type sleeves, and all flange types in the case of EM type sleeves) in the Quadra-Flex series flexible coupling assemblies (sold separately).
  • Thermoplastic rubber for resistance to oil and higher temperatures.
  • Three types: one-piece solid (Type JEM), one-piece split (Type JEMS), and two-piece split with a metal retaining ring (Type EM) for applications where the coupled shafts are difficult to separate.
  • Operating temperatures range from -50 to 275 degrees F (-46 to 135 degrees C).
Check Stock

Martin 7JEM Quadraflex Sleeve, Thermoplastic Rubber, Inch, 4.344\ OD, 2.188\ Length

  • For use with specific Martin flange types (J type flanges in the case of JEM and JEMS type sleeves, and all flange types in the case of EM type sleeves) in the Quadra-Flex series flexible coupling assemblies (sold separately).
  • Thermoplastic rubber for resistance to oil and higher temperatures.
  • Three types: one-piece solid (Type JEM), one-piece split (Type JEMS), and two-piece split with a metal retaining ring (Type EM) for applications where the coupled shafts are difficult to separate.
  • Operating temperatures range from -50 to 275 degrees F (-46 to 135 degrees C).
Check Stock

Martin 7JEMS Quadraflex Sleeve, Thermoplastic Rubber, Inch, 4.344\ OD, 2.188\ Length

  • For use with specific Martin flange types (J type flanges in the case of JEM and JEMS type sleeves, and all flange types in the case of EM type sleeves) in the Quadra-Flex series flexible coupling assemblies (sold separately).
  • Thermoplastic rubber for resistance to oil and higher temperatures.
  • Three types: one-piece solid (Type JEM), one-piece split (Type JEMS), and two-piece split with a metal retaining ring (Type EM) for applications where the coupled shafts are difficult to separate.
  • Operating temperatures range from -50 to 275 degrees F (-46 to 135 degrees C).
Check Stock

Willow Pump Breast Pump Flanges 2-Pack | Breast Shield & Nipple Visibility for Hands-Free Breast Feeding | Compatible with Willow Pump Milk Bags Clear 27mm

  • REUSABLE FLANGES: Flanges are clear flanges colored for nipple visibility & alignment for easy placement and fast assembly to ensure effective....
  • HANDS FREE PUMPING: Completely mobile and hands-free & easy to assemble – everything fits inside the pump without cords or attachments. This breast....
  • AVAILABLE IN 3 SIZES: Reference our sizing chart (pictured) to determine your size for optimal pumping experience. Flanges come in three sizes: 21mm,....
  • PUMP AND STORE: After pumping, remove flange & milk bag and store in a cooler bag, fridge or freezer - and easily transfer to a bottle when you’re....
  • USE WITH WILLOW PUMP: Exclusively designed to work with the Willow Wearable Breast Pump Generations 2 and 3. The only wearable pump that is totally....
Check Stock

Maymom Flange Inserts 17 mm for Medela Spectra 24 mm Shields/Flanges Momcozy/Willow Wearable Cup Compatible with Medela Freestyle Harmony to Reduce 24mm Nipple Tunnel Down to 17 mm 2pc/Each

  • 17 mm inserts to use with Medela/spectra 24 mm shields. It will reduce the 24-mm shield nipple tunnel down to 17 mm. Also suitable for Ameda Mya Pro,....
  • Maintain compatibility with most handsfree bra - Based on the Medela PersonalFit system. You can use most handsfree bra with your original 24 mm....
  • Can be compatible with Spectra 24mm flanges, Motif Luna 24mm flanges, Ameda Mya 24mm flanges, Ameda Mya Pro 24mm flanges, Ameda Purely Yours 25mm....
  • Also fits freemie 25 mm cup to reduce its nipple tunnel.
Check Stock