Top Flask Mould

Ice Roller for Face, Black Facial Ice Roller Mould, Silicone Face Ice Cubes for Skin Care and Pain Relief, Reusable DIY Facial Care Ice Mould

  • 【Easy to Make Ice & Demould】After frozen for no less than 12 hours in the environment below -10℃, submerge one end of the lid of the frozen ice mould under running water for 30 seconds, and then easily remove the lid horizontally..
  • 【Anti-Spill Design】We added a high quality silicone sealing ring to the seam in the middle of the ice mould, which can enhance the sealing performance of the ice mould and prevent the water in the mould from overflowing..
  • 【Good for Skin Care】The face roller with ice on the face can Improve puffiness, Moisturizing before makeup, Soothes and repairs after sun exposure, Shrink pores and tighten skin and Improve fine lines. Different DIY beauty materials can be matched according to your needs. (Such as Cherry Tomatoes, Milk, Rose, Cucumber, Lemon ect).
  • 【Also Good for Pain Relief】This ice mould is a very practical must-have gadget at home. In addition to good for facial rejuvenation, you can Use this ice mould to ice compresses for relieving physical discomfort. (Such as Toothache, Headache, Fever and Sprain ect).
  • 【Practical Gift】This ice mould is approx. 2.2 x 1.6 x 3.9 inch which is very comfortable to hold, small and light design, and easy to grasp, also the ice roller hea....
Check Stock

7 Pieces Silicone Resin Casting Moulds Set, Include 2 Universal Lighter Protective Cover Resin Mould Square Coaster Silicone Mould Spice Grinder Epoxy Mould for DIY Craft

  • Package quantity: package comes with 5 pieces silicone resin casting moulds, including 2 x universal lighter protective cover resin mould, 1 x square coaster silicone mould, 1 set of spice grinder epoxy mould, enough for you to make desired crafts.
  • Size detail: the universal lighter protective cover resin mould measures approx. 6.6 x 3.5 cm and 5.2 x 3.5 cm, the square mould is about 9.5 cm in diameter, and the grinder epoxy mould is about 6 cm in diameter, please allow a little error on the size due to manual measurement.
  • Durable material: these resin casting moulds are made of durable silicone material, not easy to break, durable to serve you for long time, and with smooth interiors, reducing the need to cut back and polish the finished resin crafts, easy to release after the resin is fully cured.
  • DIY you own craft: these epoxy DIY moulds are compatible with epoxy resin, wax, soap and other materials, add some sequins, resin dyes, dried flowers and other decors into the mould, to make practical coasters, cup mats, wall decorations, hanging ornaments, home table decors, art works and other DIY projects.
  • Nice gift choice: you can send our silicone resin moulds set to others who are DIY lovers as gifts, or send the finished products to your lover, friends....
Check Stock

WICHEMI Commercial Popsicle Mold Stainless Steel Ice Pop Molds 20PCS Ice Lolly Popsicle Mould Ice Cream Maker Mold Stick Holder with Lid Single Cup Capacity 108g

  • ✔ HIGH QUALITY MATERIAL: Created using industrial grade Stainless Steel and excellent quality popsicle mould, durable for longtime use..
  • ✔COMPACT DESIGN - Each Ice Popsicle mould is designed for easy removal and refilled at a time. It can be store individually in the freezer to save space. Comes with Stainless steel mould holder base, popsicle can be safely placed on it, convenient to take out and share your homemade popsicle with friends..
  • ✔EASY TO USE & CLEAN: Fast freeze frozen ice pop maker is easy to clean up due to the durable and rust-resistant stainless steel. Fast freeze mould is easy to use, easy to clean, and will last you a life time..
  • ✔ WIDELY USAGE: Ice cream mould helps you to make a delicious spring and summer treats using juices, purees, yogurt, applesauce, fruit, ice cream and pudding..
  • ✔PACKAGE INCLUDE:1x Ice Pop Mould (1xCleaning Brush + 100xReusable Bamboo Sticks + 50xPlastic Bag)..
Check Stock

Booze Shot Flask Wine Flasks with Rhinestone Cap Portable Alcohol Flask Chic Drink Flasks for Women Girls Party Gift ,Travel Hiking and Street Capacity 5 oz with Steel Funnel

  • 【Quality&Safety】Flask is made of food grade durable stainless steel, never rust. This Shot Flask is Sturdy so even you Drop off it won’t break.Delicate and stylish drink accessory,glitter coating,rhinestone cap,it can hold 5 oz wine,easy to clean the inside of the flask,makes a perfect gift..
  • 【Portable Flask】Women flask is easy to carry put into your Jean pocket or purse .When you go hiking or outside,you can easy to bring this flask with you.5OZ perfect size as portable flask.Our new portable wine flasks are designed to allow you to refill your beverages in public without raising any suspicions..
  • 【Capacity and Size】Women flask is hand size.Size is height:4.72inches,width:3.9inches ,thickness:1.18inches. Can hold up to 5 ounces of liquid, the equivalent of 3 shots..
  • 【Beautiful Gift】 Girl/Women drinking Flask is a perfect Gift for you or your friends who love Drinking and Loves fashion.This flask with Full AB crystal Stone Lid Cap,Shinny Stainless steel face.You can use this as a Birthday Gift,Party Gift,Christmas Gift ,New Year Gift too.Gift Package!.
  • 【Great For Travel】 Your new glitter flask fits perfectly into a small clutch, handbag, or purse. It’s easy to tuck away at events, and light and portable enough to take with you anyw....
Check Stock

Laboy Glass Single Neck Flat Bottom Boiling Flask 2000mL with 24/40 Joint Heavy Wall Receiving Apparatus Organic Chemistry Lab Glassware

  • DESIGN----The flat bottom flask is likely the round bottom flask but with a flat bottom allowing it standing up flat surface as the flask can sit upright on its own,rather than in a flask clamp or cork stand,ideal for using as a receiving flask.When under heating,it is not durable as round bottom flask but better than Erlenmeyer flask which have the sharp and vulnerable corners.The short neck is with a standard taper joint,which can attach the lab glassware with standard tape joint..
  • WIDELY USED-----A flat bottom flask is used in chemistry laboratory for experiments involving collecting and measuring liquids, mixing solvent In a apparatus,the flat bottom flasks can attach to a adapter,liebig or allhnn condenser,take off adapter as a or receiving flask.In a soxhlet extraction, a flat bottom attaches the soxhlet extractor used as boiling and receiving flask..
  • DIMENSIONS-----This flat bottom flask has a capacity of 2000mL,the short neck is with a 24/40 standard taper female joint, which is interchangeable ,can be attached to any jointed glassware with a 24/40 male joint..
  • HEAVY WALL ---Laboy glass flasks are heavy wall design ....
Check Stock

Zest CHAIRSIDE® Attachment Processing Material 8gm, 4ml Fast Set

  • AAProTools Denture Flask Set / Dental Flask Set Brass Denture Alloy Press with Flask UPPER/LOWER.
  • Laboratory Lab Spring Press Compress With Two Brass Denture Flask Upper And Lower Set Include : 1 Brass Lab Spring Press Double Holder 1 Brass Denture Flask Upper 1 Brass Denture Flask Lower.
  • All Instruments Are Produced With High Quality.
  • AAProTools Products Offer A Handmade Touch To Each Instrument.
Check Stock

Secret Flask Looks Like an Ice Pack. Great Hidden Flask for Coolers, Discreet Flask for Work, and Disguised Festival Flask. Also a Reusable Flask and Disposable Flask (1)

  • FULLY ENGAGED STEALTH MODE! Your secret flask holds 14 oz. and can easily be a hidden flask in a cooler, bagged lunch, or even the work freezer..
  • SECRET FLASK IS GREAT FOR coolers, bagged lunches and freezer shelves. Bring your hidden flask to the beach, to concerts in the park, the fishing boat, anywhere you might get a little thirsty..
  • FOOD SAFE PLASTIC. Your hidden flask is a safe and BPA-free reusable flask or disposable flask. How often you use it, and for how long, is entirely up to you..
  • EASY TO CLEAN. Add a few drops of soap into your secret flask and then fill to 3/4s full with water. Tightly seal the cap and shake. Empty and rinse your hidden flask until the water runs clear..
  • ADD TO CART NOW TO start the series of the best decisions you have ever made in your life. Congratulations!.
Check Stock

WICHEMI 20PCS Stainless Steel Popsicle Molds Commercial Pop Mould Ice Lolly Popsicle Mold Frozen Ice Cream Popsicle Maker Molds Stick Holder with Wooden Sticks, Plastic Bag and Cleaning Brush

  • ✔ HIGH QUALITY MATERIAL: Created using industrial grade Stainless Steel and excellent quality popsicle mould, durable for longtime use..
  • ✔COMPACT DESIGN - Each Ice Popsicle mould is designed for easy removal and refilled at a time. It can be store individually in the freezer to save space. Comes with Stainless steel mould holder base, popsicle can be safely placed on it, convenient to take out and share your homemade popsicle with friends..
  • ✔EASY TO USE & CLEAN: Fast freeze frozen ice pop maker is easy to clean up due to the durable and rust-resistant stainless steel. Fast freeze mould is easy to use, easy to clean, and will last you a life time..
  • ✔ WIDELY USAGE: Ice cream mould helps you to make a delicious spring and summer treats using juices, purees, yogurt, applesauce, fruit, ice cream and pudding..
  • ✔PACKAGE INCLUDE:1x Ice Cream Stick Mould (1xCleaning Brush + 100xReusable Bamboo Sticks + 50xPlastic Bag)..
Check Stock

Gildan 100% Cotton Long-Sleeve T-shirt (G2400) Tee Medium Dark Chocolate

  • Made of high quality PC material, easy to clean..
  • Great for making handmade chocolate, candy, jelly, cake decorating, etc. Professional chocolate tools. NOT suitable for microwave oven, toaster..
  • Shoe mould size: 8.5"( L ) X 3.9"(H)/21.5cm X 10cm..
  • Easy to wash and clean after use. This Mould is durable for long time use..
  • 2 Cavities per mould. Use clips to hold mould after pouring melted chocolate..
Check Stock

FineGood 5 PCS Chocolate Moulds Chocolate Heart Moulds Chocolate Bar Mould Alphabet Silicone Mould Cake Number Mould Waffle Chocolate Mould

  • What You Will Get: 1 pc heart chocolate mould, 1 pc number candy mould, 1 pc letter alphabet chocolate mould, 1 pc chocolate bar mould 1pc mini waffle....
  • Premium Material: These chocolate & sweet moulds are made of food grade silicone which is of great flexibility and utility. It is suitable for making....
  • Non-stick Silicone Baking Tray: The material of these silicone baking moulds is smooth, soft and nonstick, you can take the chocolate from these mould....
  • Range of Temperature: Temperature is safe from -40 to 230 degrees Celsius(-104 to 446 degrees Fahrenheit). Such as ovens, microwaves, dishwashes and....
  • Creative and Interesting: These silicone moulds can create all sort of words and patterns, it can be used for making all kinds of deserts or cake....
Check Stock

Laboy Glass Single Neck Flat Bottom Boiling Flask 1000mL with 24/40 Joint Heavy Wall Distillation Receiving Apparatus Organic Chemistry Lab Glassware

  • DESIGN----The flat bottom flask is likely the round bottom flask but with a flat bottom allowing it standing up flat surface as the flask can sit upright on its own,rather than in a flask clamp or cork stand,ideal for using as a receiving flask.When under heating,it is not durable as round bottom flask but better than Erlenmeyer flask which have the sharp and vulnerable corners.The short neck is with a standard taper joint,which can attach the lab glassware with standard tape joint..
  • WIDELY USED-----A flat bottom flask is used in chemistry laboratory for experiments involving collecting and measuring liquids, mixing solvent In a distillation apparatus,the flat bottom flasks can attach to a distillation adapter,liebig or allhnn condenser,take off adapter as a distillation or receiving flask.In a soxhlet extraction, a flat bottom attaches the soxhlet extractor used as boiling and receiving flask..
  • DIMENSIONS-----This flat bottom flask has a capacity of 1000mL,the short neck is with a 24/40 standard taper female joint, which is interchangeable ,can be attached to any jointed glassware with a 24/40 male joint..
  • HEAVY WALL ---Laboy glass flasks are heavy wall design , made by hand-blowing according to ASTM E438 ,made of high-quality borosilicate glass and an....
Check Stock

Golden pattern 8 Oz Gift 100% Stainless Steel 304/18-8 SS .Bonus 2 Shot Glass+1Funnel+1Giftbox.Flask Leak Proof Tested.Flask for Liquor/Alcohol.Flask for Men/Women

  • WHAT YOU GET: The hip flask set includes 1 stainless steel flask, 2 bonus stainless steel shot glass set, 1 bonus stainless steel funnel for easy pour, and 1 gift box for any gift giving occasion. Consider getting our classic flask for yourself and another one for your loved one as a gift.
  • QUALITY: IVYRISE flask for liquor is produced with only the highest quality food grade STAINLESS STEEL (BPA FREE and ECO FRIENDLY) which is also trusted in the food industry. We use 304 (18/8) grade stainless steel because it DOES NOT LEAK, RUST, CORRODE, and BEND.
  • DESIGN: The last thing you want to do is lose the cap so that is why our heavy duty caps are attached to the flask itself. Our silver discrete flask for alcohol is designed in a curved shape so they are comfortable while seated.
  • GREAT GIFT OPTION for any occasion: birthday, groomsmen gifts, bridesmaids gifts, best man gifts, father, mother, boss etc. Enjoy your flask during wedding, camping, fishing, golfing, tailgating, barbecue, flask for men, flask for women etc. NOTE: We do not provide engraving services.
  • The silver hidden flask set 8 oz holds many of your favorite drinks: whiskey, gin, vodka, tequila, rum, scotch etc. Make sure to share your favorite drink with your loved ones with 2 shot glasses includ....
Check Stock