Top Flat Bar Screw Clamp

Jorgensen 2-Piece Steel Bar Clamp Set, Light Duty F-Clamp, 8-inch & 12-inch

  • Basic Parameter : The throat depth is 2 inch, the maximum opening capacity is 8-inch and 12 inch, the normal load limit is 300 lbs.
  • Materials : Cast-iron stationary and sliding heads with an orange, powder coated finish are merged with a high-carbon, rust-resistant steel bar make it strong and durable. Glass-filled nylon handle is large and comfortable for easy grip.
  • Features : Adjustments are made quickly and securely with the fast-action sliding head and two hardened steel clutch mechanism. Original multiple-disc-clutch design allows the sliding head to hold securely at any point along the bar. The steel screw and clamp head are capped with soft and durable plastic pads protect your workpiece.
  • Combo Clamp In The Packaging : Comes with 2 piece bar clamps include one 8-inch and one 12-inch clamp in the package.
  • Application & Target Users : Used in a wide range of light-duty woodworking, cabinetry, metalworking, and other DIY needs. Great tools for hobbyist, carpenters, cabinet makers, woodworkers, metalworkers and professional trades people of all types.
Check Stock

DE-STA-CO 812-U Pneumatic Hold-Down Clamp with U-Bar, 150 lb Hold Capacity

  • Low-profile, compact clamp fits in tight workspaces.
  • Built-in air flow control provides smoother operation during repetitive clamping operations than manual clamps.
  • Holding screw moves on the U-shaped hold-down bar for larger clearance angle.
  • Holding capacity is 150 lb. and maximum clamp bar opening is 99 degrees.
  • Port size is M5, operating temperature is -10 degrees F to 165 degrees F, and maximum inlet pressure is 53 psi.
Check Stock

3 Pcs Screw Holders, Screw Clamps for Woodworking Tools

  • This Screw Holder is made of high-quality plastic, which is not easy to be damaged, small and light..
  • It can provide clamping function when the screwdriver head cannot absorb the screw..
  • The inner triangular design can be more effectively fixed on the cutter bar..
  • It can clamp screws of various shapes within the scope of application..
Check Stock

Sourcemall Mini Bench Vise Small Table Clamp Hobby Craft Repair Tool (Clamping Range: 0-1.2inch)

  • The mini bench vise is ideal for holding small parts in Jewelry, Hobby, Model making, Electronics, Home and Work-Bench, and etc..
  • Mini Vise body is made of Aluminum which is durable, Light weigh and it's a very portable tool..
  • This clamp is easy to use. Simply turn the bar on top to open and close the clamp onto a table surface and then turn the screw to securely clamp any small objects to work on..
  • Clamp down any wooden block for sanding, grinding, detail, drilling, carving, chiseling, and much more..
Check Stock

One (1) Pair BESSEY 60\ Heavy-Duty IBeam Bar Clamps for Woodworking

  • One (1) pair of IBEAM60 clamps that provide 60" of clamping width..
  • All lengths of Bessey IBeam clamps provide up to 7000 lbs. of clamping force and include the following standard specifications: 2" throat depth.
  • Steel, nickel-plated IBeam design provides exceptional strength over large distances without bending or twisting..
  • Cast iron sliding clamp jaw contains 5 clutch plates that allow it to move smoothly along the rail, while still holding its position under pressure..
  • Fixed end jaw has a 3/4" acme-threaded screw and large, easy-to-grip handle for quickly setting the clamp jaws while providing control over the pressure being applied..
Check Stock

One (1) Pair BESSEY 48\ Heavy-Duty IBeam Bar Clamps for Woodworking

  • One (1) pair of IBEAM48 clamps that provide 48" of clamping width..
  • All lengths of Bessey IBeam clamps provide up to 7000 lbs. of clamping force and include the following standard specifications: 2" throat depth.
  • Steel, nickel-plated IBeam design provides exceptional strength over large distances without bending or twisting..
  • Cast iron sliding clamp jaw contains 5 clutch plates that allow it to move smoothly along the rail, while still holding its position under pressure..
  • Fixed end jaw has a 3/4" acme-threaded screw and large, easy-to-grip handle for quickly setting the clamp jaws while providing control over the pressure being applied..
Check Stock

One (1) Pair BESSEY 72' Heavy-Duty IBeam Bar Clamps for Woodworking

  • One (1) pair of IBEAM72 clamps that provide 72" of clamping width..
  • All lengths of Bessey IBeam clamps provide up to 7000 lbs. of clamping force and include the following standard specifications: 2" throat depth.
  • Steel, nickel-plated IBeam design provides exceptional strength over large distances without bending or twisting..
  • Cast iron sliding clamp jaw contains 5 clutch plates that allow it to move smoothly along the rail, while still holding its position under pressure..
  • Fixed end jaw has a 3/4" acme-threaded screw and large, easy-to-grip handle for quickly setting the clamp jaws while providing control over the pressure being applied..
Check Stock

Pony Tools 56 6 Pack 2-1/2in. Deep Reach Clamp and Spreader Fixture for 3/4in. Pipe

  • Pony 56 3/4" deep throat bar clamp fixture have all moveable parts on one head.
  • Features a special deep-reach head, which allows you to micro-adjust your tightness from the outboard end of your clamp.
  • The design is perfect for tight jobs where traditional pipe clamps may not work.
  • Sliding head operates smoothly with the 5/8" adjusting screw for final tightening.
  • Fixed head can be reversed and clamp can be used as a spreader.
Check Stock

Nilight - 90027B 2PCS LED Light Bar Horizontal Bar Clamp Mounting Kit Fit on 0.75' 1' 1.25' Bull Bars Roof Racks Roll Cages for ATV UTV and Trucks, 2 Years Warranty

  • Multi-application The mini bar clamp is designed for a smaller horizontal tube size 0 75” 1” 1 25” It is applicable for roof racks roll cages bull bars handlebars on ATV UTV and trucks.
  • High Compatibility Compatible with various types of light bar brackets the 10mm screw hole diameter fits all light with 8mm mounting screws.
  • Perfect Fit Rubber Inserts Rubber inserts/strip are designed with rubber teeth that can fit perfectly and grip securely with the thread of inside clamp Making installation easier and always protecting the metal from being worn down.
  • Built With Quality Clamps are built using precision-welded cast sturdy aluminum makes it lightweight but pretty neat and durable..
  • Make Light Mounting Easier With the high compatible bar clamp you’ll hassle, free of drilling holes in your vehicle body. Simple all in one kit makes your life easier..
Check Stock

Microphone Boom Stand, Gulee Heavy Duty Studio Suspension Mic Arm Stand for Blue Snowball Yeti with Flexible Standard Condenser Microphone Clip (White)

  • ... Simple to install and easy to use, convenient to be carried around.
  • Fully fexible, 360-degree rotation, you can extend, tilt and angle your mic exactly where needed.
  • Great Compatibility: The included mic clip is suitable for standard handheld microphone, and Blue Yeti/Snowball can be mounted with 5/8" threaded screw adapter at the end of the stand.
  • Wide Application: For professional or beginner use, perfect for studios, broadcasting, families, podcast, stages, TV stations and more.
  • What You Get: 1 x microphone stand, 1 x mounting clamp, 1 x standard mic clip (with 5/8" screw adapter) & 1 x user guide. Note: the screw hole of some Blue Yeti would be a little bit larger than standard 5/8" screw hole, while simply wrap a thread tape (not included) on the mounting screw, you can make it fitDescription.
  • "We are always faced various choices, hopefully, adding GULEE to your cart would be one of the right choices you ever made.".
  • NOTE: Microphone boom arm only. Microphone, cable, shock mount & pop filter are not included..
  • Durable Heavy Duty Microphone Stand Arm:.
  • The GULEE mic boom arm is made of high quality metal and premium components, which makes it more stable and reliable than other ordinary stands..
  • Electrostatic powder spraying surface can effec....
Check Stock

Aluminum Alloy Mini Table and Bench Vise Clamp Portable Craft Repair Tool for Woodworking and Small Work Hobby

  • 【Premium Grade】: Made of high-quality aluminum alloy, with plastic-sprayed surface treatment, corrosion-resistant and comfortable, more durable..
  • 【Ideal Details】: The high-quality rotating rod design can be flexibly adjusted in size, and the handle is ergonomic, non-slip and effortless.....
  • 【Indispensable Tool】: Easy to use for anyone, simply turn the bar on top to open and close the clamp onto a table surface and then turn the screw....
  • 【Universal】: Used for small work, craft, art, detailing, woodworking, workbench, soldering, finishing, modeling. Suitable for all kinds of flat,....
  • 【Friendly Customer Service】: Your satisfaction is our ultimate goal, if there is any dissatisfaction, please contact us, we will deal with you a....
Check Stock

ALZO Horizontal Camera Mount, Tripod Accessory for Overhead Product Photography

  • Solid 33 inches long, 5/8 inch diameter aluminum bar with camera mount screw and a tripod clamp.
  • made of hard black anodized for years of trouble-free service.
  • Rod includes grooved end to allow hanging a counter weight or water bottle.
  • maximum recommended camera weight is 2 pounds without counterbalance, and 8 pounds with a counterbalance, see image with water bottle.
  • Tripod Clamp attaches to any tripod with 1/4 x 20 camera screw and allows for adjusting rod extension length, as well as camera rotation.
  • Important tripod accessory for overhead photography of small objects that cannot easily stand up on their own for a frontal shot.
  • we recommend a wired or wireless camera shutter release for use with the ALZO Horizontal Camera Mount.
  • NOTE: A tripod or any other components shown in the images are not included with this product.
  • includes a user guide (see link below under "Technical Specification").
Check Stock