Top Flat Bottom Drill Bit

Fulton 10 inch Long Forstner Bit Extension for Adding Over 8\ of Drilling Depth to Your Forstner Bit Ideal for Wood Turners Furniture Carpentry and Construction (3/8 inch Collet)

  • Drilling with forstner bits to achieve a flat bottom hole or to start a deep hole turning project like on a larger vase or vessel is essentially impossible with a standard length forstner bit. To remedy this issue we have developed an extra long, heavy duty steel extension that allows you to secure a 3/8 inch shank forstner bit into the end collet..
  • The forstner bit extension gives you additional 8-1/2 inches of reach to bore deeper into your projects. This will help you create larger diameter starter holes or help when you need to drill in just a little further than the standard bit length will allow. The extension can be used with forstner bits on drill presses, lathes with a drill chuck installed (drill chuck not included) or with a power drill..
  • One of the most common uses for the forstner bit extension is for woodturners who need to bore out starter holes on larger vessels. However, the extension works exceptionally well for projects like salt shakers, pepper mills or even wood turned beverage mugs. Contractors use the extension when they need to bore deep holes for running cables or wires and they also use it for joining larger timbers..
  • The forstner bit extender is made from solid, heavy duty machined steel. It is designed to be used with forstne....
Check Stock

FTG USA Countersink Drill Bit Set 3 Pc #10 (3/16') Wood Countersink Drill Bit Same Size Set Countersink Tapered Countersink Bit, Quick Change Shank, 1 Hex Wrench, Woodworking Countersink Drill Bits

  • Countersink drill bit set for wood with tapered drill bit , 4 Flute countersink cutter #45 Carbon Steel, tapered countersink set features 3 Piece drill set All Same Size drill bits with countersink #10 (3/16") Adjustable wood countersink, 1 Hex Wrench (1/8" Allen Key). Counter-bore, and wood plugs size 3/8 inch. Hex shank compatible with 1/4" standard Quick Change chuck including impact drills. FTG 2348 drill bit set hex shank.
  • Wood drill bit set with counter bore chamfer angle 82 degree, smooth countersinking in hard and soft wood, tapered holes for screws. Adjustable countersink drill bit with quality built depth adjustable counter bore attaches to flat on shank with 2 hex screws for controlled pilot hole depth. Best adjustable wood countersink drill bits set ideal for woodworking. Countersink tool set made with countersink bits for wood.
  • Tapered drill bits pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. Countersink hex drill bit set with tapered drill bit can be replaced with FTG replacement taper drill bits countersink for extended wood bit. Countersink drill bits for wood made to drill, countersink, and counter-bore in 1 step sink counter set. Counter sink bits designed as to work as wood drill bits.
Check Stock

Big Gator Tools STD Series 3PC V-Drill Guide w/35 SAE Hole Sizes 1/8' - 5/8' 3PC Set

  • Includes: (1) STD500NP, (1) STD1000DGNP & (1) STD2000DGNP Special nickel alloyed steel heat treated for durability. Non-plated material with light oil coating to prevent rust..
  • Centers the holes on pipes, dowels & outside corners. Flat side allow 90° drilling into flat surfaces-just clamp and drill..
  • Automatically squares up the drill with the surface. Alignment marks on both sides, to line up on center..
  • Bottom surface is precision ground to ensure stability & accurate perpendicular alignment on flat surfaces. Round stock hole alignment marks on one side..
  • Prevents drill bit wander. Portable, pocket-sized and housed in a handy plastic storage case w/surface ridges to prevent opening, PegBoard-Friendly..
Check Stock

FTG USA Countersink Drill Bit Set 6 Pc #10 (3/16') Wood Countersink Drill Bit Pro Pack Countersink Set, Tapered Countersink Bit, 1 Stop Collar, Hex Wrench, Woodworking Countersink Drill Bits

  • Countersink drill bit set for wood with tapered drill bit , 4 Flute countersink cutter #45 Carbon Steel, tapered countersink set features 6 Piece Pro drill set Same Size drill bits with countersink #10 (3/16") Adjustable wood countersink, 1 Depth Stop Collar 3/8", 1 Hex Wrench (1/8" Allen Key). Counter-bore, and wood plugs size 3/8 inch. Hex shank compatible with 1/4" standard Quick Change chuck including impact drills. FTG 2350P counter sinker drill bit for wood.
  • Wood drill bit set with counter bore chamfer angle 82 degree, smooth countersinking in hard and soft wood, tapered holes for screws. Adjustable countersink drill bit with quality built depth adjustable counter bore attaches to flat on shank with 2 hex screws for controlled pilot hole depth. Best adjustable wood countersink drill bits set ideal for woodworking. Countersink tool set made with countersink bits for wood.
  • Tapered drill bits pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. Countersink hex drill bit set with tapered drill bit can be replaced with FTG replacement taper drill bits countersink for extended wood bit. Countersink drill bits for wood made to drill, countersink, and counter-bore in 1 step sink counter set. Counter sink bits desi....
Check Stock

Forstner Drill Bit Set 16pcs 15-35mm Punching Bit Wood Slabs Flat Wing Drilling Hole Hinge Cemented Carbide Drilling Counterbore Flat Bit Drill Set Woodworking Hole Saw Wood Cutter Tool (16pcs)

  • 【Durability Design 】:The bit includes a center point which guides it throughout the cut and incidentally spoils the otherwise flat bottom of the hole..
  • 【Precisely Cut】:The cylindrical cutter around the perimeter shears the wood fibers at the edge of the bore, and also helps guide the bit into the material more precisely..
  • 【High Quality】:Made from high quality carbide tungsten steel and being hot-treated,sharp edge,high hardness, accurate positioning,high precision,smooth cutting,impact resistance,high toughness.more smooth,less noise..
  • 【Application】：Suitable for pistol drill, bench drill, vertical drilling machine hand held electric drill, stand motor-driven drilling machine and mobile ribbon type magnetism drilling machine,etc.Perfect used for drilling precision holes in most of different types of wood, such as drawer, mounting spherical door shoot tip, perforation on wood products, and plastic products etc..
  • 【Various Sizes】: 15mm(19/32"), 16mm(5/8"), 17mm(43/64"), 18mm(45/64"), 19mm(3/4"), 20mm(25/32"), 21mm(53/64"), 22mm(5....
Check Stock

FTG USA Wood Countersink Drill Bit Set 6 Sizes Set Countersink HSS M2 Tapered Drill Bits, Quick Change Hex Shank Countersink bit, 2 Stop Collar, 1 Allen Wrench, Countersink Drill Bit for Woodworking

  • Countersink drill bit set for wood with tapered drill bit 3rd Party Tested HSS M2, 4 Flute countersink cutter #45 Carbon Steel tapered countersink set 6 sizes drill bits with countersink #4 (7/64"), #6 (9/64"), #8 (11/64"), #10 (3/16"), #12 (7/32"), #14 (1/4") Adjustable wood countersink, 2 Depth Stop Collar, 1 Hex Wrench (1/8" Allen Key). Counter-bore, and wood plugs sizes 1/2" and 3/8". Hex shank compatible with 1/4 inch standard Quick Change chuck including impact drills.
  • Wood drill bit set with adjustable 4 Flute Cutter counter bore chamfer angle 82 degree, smooth countersinking in hard and soft wood, tapered holes for screws. Adjustable countersink drill bit with quality built depth adjustable counter bore attaches to flat on shank with 2 hex screws for controlled pilot hole depth. Best adjustable wood countersink drill bits set ideal for woodworking. Countersink tool set made with countersink bits for wood, FTG 2341P tapered countersink drill bits.
  • Tapered drill bits pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. Countersink hex drill bit set with tapered drill bit can be replaced with FTG replacement taper drill bits countersink for extended wood bit. Countersink drill bits for wood made to dri....
Check Stock

XtremepowerUS 45356 Rotary Hammer Drill w/Bits & Case Electric 1-1/4\ SDS Concrete Cement Masonry

  • Rotary Hammer Drill - Perfect for tough tasks such as demolishing brickwork, removing plaster, taking off tiles and digging out old grouting. The drill is powered by an impressive motor, making it suitable for drilling into materials including masonry, wood and metal.
  • Variable Speed - With a no load speed 600 RPM and variable speed trigger, you'll always remain in total control of your tool, whatever the job at hand. For added ease of use, the drill also includes an anti-vibration mechanism, and auxiliary handle. (Bit Type Accepts: SDS Plus).
  • Powerful Impact Energy - 15J impact energy is designed to complete easily and precisely concrete and metal working projects. Well designed heat dissipation motor and double anti-dust bottom structure can extend the hammer's use life..
  • Flexible Swivel Handle - Adjustable 360 degree side handle and ergonomic D-grip handle for comfort and control. Rotating swivel lock handle can be detached or re-positioned for better utilization..
  • Various Drilling Modes and Bits - SDS Plus Bull Point Chisel, SDS Plus Flat Chisel, 3pc. SDS Drill Bit Set, Face Mask, Goggle, Gloves, Storage Case, and Extra Set of Carbon brushes.
Check Stock

DEWALT FLEXVOLT ADVANTAGE 20V MAX* Hammer Drill, Cordless, 1/2-Inch, Tool Only (DCD999B)

  • Rotary Hammer Drill - Perfect for tough tasks such as demolishing brickwork, removing plaster, taking off tiles and digging out old grouting. The drill is powered by an impressive motor, making it suitable for drilling into materials including masonry, wood and metal.
  • Variable Speed - With a no load speed 600 RPM and variable speed trigger, you'll always remain in total control of your tool, whatever the job at hand. For added ease of use, the drill also includes an anti-vibration mechanism, and auxiliary handle. (Bit Type Accepts: SDS Plus).
  • Powerful Impact Energy - 15J impact energy is designed to complete easily and precisely concrete and metal working projects. Well designed heat dissipation motor and double anti-dust bottom structure can extend the hammer's use life..
  • Flexible Swivel Handle - Adjustable 360 degree side handle and ergonomic D-grip handle for comfort and control. Rotating swivel lock handle can be detached or re-positioned for better utilization..
  • Various Drilling Modes and Bits - SDS Plus Bull Point Chisel, SDS Plus Flat Chisel, 3pc. SDS Drill Bit Set, Face Mask, Goggle, Gloves, Storage Case, and Extra Set of Carbon brushes.
Check Stock

2 Inch Forstner Bit, BAIDETS Forstner Drill Bit 2 Inch for Wood by Round Shank

  • Forstner bit made of High speed steel, has a 2" cutting diameter and round shank, compatible with all standard drill and drill press chucks..
  • Excellent for drilling in softwood or solidwood, plywood,coated chip board, laminates as well as mdf plates.
  • The tooth-shaped design for fast and flawless cutting, ensures less friction and heat, which enable optimized chip removal, longer service life..
  • Version of the Forstner drill centering tip, centering tip of the drill allows precise positioning without slipping, for cutting clean and accurate flat bottom holes..
  • We provide 100% satisfaction service, if you have any questions, please kindly feel free to contact us.
Check Stock

1 Inch Forstner Bit, BAIDETS Forstner Drill Bit 1 Inch for Wood by Round Shank

  • Forstner bit made of High speed steel, has a 1" cutting diameter and round shank, compatible with all standard drill and drill press chucks..
  • Excellent for drilling in softwood or solidwood, plywood,coated chip board, laminates as well as mdf plates.
  • The tooth-shaped design for fast and flawless cutting, ensures less friction and heat, which enable optimized chip removal, longer service life..
  • Version of the Forstner drill centering tip, centering tip of the drill allows precise positioning without slipping, for cutting clean and accurate flat bottom holes..
  • We provide 100% satisfaction service, if you have any questions, please kindly feel free to contact us.
Check Stock

10 Pieces Nail Drill Bits Set 3 Pieces Cone Tapered Barrel Carbide Nail Cuticle Drill Bit 3 Pieces Flat Top Large Barrel Carbide Bit 3 Pieces Round Top Large Barrel Head Nail Carbide Bit Gold

  • Durable and reliable: our nail drill bits are made of strong and quality cemented carbide and tungsten carbide, with strength, pointedness, durability....
  • Widely applicable: the set includes 10 nail drill bits of different styles and sizes, which fit most nail drill machines that use 3/32 inch bits, each....
  • Tapered barrel carbide nail drill bit: these cuticle drill bits consist of tapered barrels and flat top designs, ideal for nail trimming, filling....
  • Flat top large barrel carbide bit: the design of the flat top head works well in carving, grinding, sanding, polishing, it can deal with your own nail....
  • Large barrel head carbide bit: smooth round top large barrel head carbide bits have 3 different grit size, can be combined to polish nail surface or....
Check Stock

BOSCH GT2000 4-Piece Carbide Tipped Glass, Ceramic and Tile Drill Bit Set , silver

  • PRECISION: Features Bosch’s unique product design with a precision tip to help solve any bit wandering or bit walking.
  • QUALITY: This glass and tile set includes a high-quality carbide tip with a reinforced head to reduce stress, prevent bit cracking and the diamond ground cutting edges provide a longer life.
  • VERSATILE: Perfect for common applications such as relief holes for glass cutting, bathroom and shower installs, drilling and fastening mirrors, setting concrete screws in tile and many more.
  • RELIABLE: The three flat shank provides superior grip on 5 16 in. bits and larger to prevent slippage. The Bosch Glass & Tile bits are easy to use while still providing best-in-class speed so you can get the job done faster.
  • INNOVATIVE: Featuring the Bosch branded, innovative geometry allows bits to drill faster. Each bit is clearly labeled so you can select the correct fit for the task. Included drill bit sizes: 1/8 in., 3/16 in., 1/4 in., 5/16 in..
  • Precision tip - Solves bit wander and bit walking.
  • High quality carbide with a reinforced head that prevents bit cracking and provides a longer life.
  • Bosch branded, innovative geometry allows bits to drill faster.
Check Stock