Top Flat Frequency Response

Image Dynamics SQ1200.1D Monoblock 1200 Watts RMS SQ Series Amplifier

  • 15" Dual 4 ohm ID MAX V.4 Series Subwoofer | Pressed paper composite cone woofer | Parabolic EPDM rubber surround | Over 2" long linear excursion | RaDiaToR cooling system for heat dissipation | Radiant Diametric Torsional Reinforcement.
  • High compliance suspension design | Flat spider with NOMEX cloth woven tinsel leads | High-temperature flat wire, flat wound voice coil | Inverted dust cap with logo | Powder coated alloy proprietary basket.
  • DC Resistance (Re): 3.10 Ω | Resonance Frequency (Fs): 29.61 Hz | Equivalent Volume (Vas): 109.03 L | Electrical Q Factor (Qes): 0.75 | Mechanical Q Factor (Qms): 1.47 | Total Q Factor (Qts): 0.5 | Frequency response: 20-250 Hz.
  • Peak Excursion (Xmax): 44 mm | Force Factor (BL): 11.40 Tm | Piston Area (Sd): 934.79 cm2 | Sensitivity: 87.60 dB 1w/1m.
  • Mounting Depth: 10.40 in | Outside Diameter: 16.22 in | Cutout: 14.80 in.
Check Stock

Shure ULXD2/B58 Wireless Handheld Microphone Transmitter with Interchangeable Beta 58A Cartridge, G50 Band

  • This transmitter requires a Ulxd4 receiver to complete the system. Note: when purchasing separate wireless components, please match their frequency bands to ensure proper system operation.
  • The Ulxd2 is a handheld wireless transmitter compatible with ULX-D digital wireless Systems.
  • Interchangeable Shure microphone cartridge. This transmitter model includes the beta 58A microphone cartridge.
  • With a rugged yet lightweight aluminum body and integrated antenna, The Ulxd2 delivers uncompromising audio quality and RF performance, AES 256-bit encryption for secure transmission, and advanced recharge ability options for professional sound Reinforcement applications.
  • 30 hz–20 kHz range with flat frequency response (actual response is microphone dependent).
Check Stock

Behringer B 906 Dynamic Microphone for Instrument and Vocal Applications

  • Professional dynamic microphone for instrument and vocal applications.
  • Frequency response designed for guitar amplifiers, percussions and brass instruments.
  • Super-cardioid polar pattern minimizes background noise and feedback.
  • Switchable low-cut, flat and high-frequency boost to match instruments.
  • Extremely high signal output which lets the sound cut through.
Check Stock

Yamaha HS7W 7-Inch Powered Studio Monitor Speaker, White

  • Newly developed transducers, which deliver a higher degree of accuracy and an extended frequency response (up to 30kHz)..
  • Perfectly-matched amp unit for consistently flat response..
  • Advanced noise reduction technology to meet the demands of professional production environments..
Check Stock

HiVi-Swans DIY 3.1A Passive Bookshelf Speakers Pair - DIY Speaker Kit-Peak Power 120 Watt 3 Way Home Theater Bookshelf Speakers for Surrounds or Front

  • High-fidelity Sound System – This DIY speakers kit with many components that are much more expensive high-end systems. Perfect as rear/side surround home theater speakers for a 5.1, 7.1 or 11.1 setup..
  • System Type – 3 way 4th order vented cabinet with a cross brace. Cabinets are constructed of ¾” MDF. They can be painted or laminated with supplied simulated black wood vinyl..
  • Drivers - long-throw 6. 5’’ Kevlar woofer for punchy and powerful bass, 2’’ dome midrange for sweet and smooth sound, and isodynamic ribbon tweeter for high resolution and clean sound..
  • Flat frequency response - unique three-way speakers have flat frequency response for steady and high-quality sound reproduction..
  • Easy assemble – with all necessary parts equipped, including speaker cabinets, drivers, screws, wires, acoustic dampening material, grill covers, crossover, and other related electronic components. Some tools required..
Check Stock

KEF LS50 Mini Monitor – Black Edition (Pair)

  • The LS50 radiates an extremely large listening sweet spot and delivers a remarkably fast, clean, and expansive sound with its Unit-Q driver Array..
  • The construction of the ls50’s cabinets plays a big Part in their sound. From baffle Shaping and port design, the LS50 reproduces your Audio completely flat and unaltered..
  • The LS50 comes in four spectacular colors, each with its own corresponding Unit-Q driver Array Color and frequency response is 79Hz – 28Khz (3Db).
  • The LS50 is one of the most award-winning speaker products ever released by KEF, receiving accolades from such publications as stereophile, what hi-fi, and the absolute sound..
  • Frequency range (-6db)-47hz – 45Khz. crossover frequency-2.2Khz. Maximum output-106db.
Check Stock

East Brooklyn Labs BAL-Pro50x Bluetooth Adapter for Audio-Technica ATH M50x Headphones and Other Mic Compatible Headsets (Boom Mic Only)

  • CLEAR CRISP AUDIO Condenser microphone features exceptionally clear sound quality and easily rotates for best positioning.
  • COMPATIBILITY Compatible with the EBL BAL-M50x Pro Bluetooth adapter and other gaming headsets.
  • FREQUENCY RESPONSE Flat frequency response allows for it to bring the highest quality audio for any voice type.
  • WIND AND OUTSIDE NOISE FILTER Built-in wind and pop protection enables crystal clear audio technica microphone.
  • EASY TO USE Easily connects to your device and is removable for travel or storage.
Check Stock

Audix DP7 7-piece Drum Mic Package + 7 XLR Mic Cables

  • D6 FOR KICK DRUM: The D6 has a frequency response of 30Hz-15kHz and is characterized with a cardioid pick-up pattern. The D6 is designed to sound good in any position and it is not dependent on finding the "sweet spot" of the drum. The D6 capsule features the same legendary VLM technology that has made the D series percussion and instrument microphones very popular for today's live stages and recording studios..
  • I5 FOR SNARE: The i5's cardioid polar pattern allows it to focus on the specific instrument that is being miked while rejecting other instruments or ambient noise on stage. With a smooth and uniform frequency response of 50Hz-16kHz and an ability to handle sound pressure levels in excess of 140dB, the i5 can be used for a wide variety of applications and for all genres of music..
  • TWO D2S FOR TOMS: For bringing out the real, dynamic sound of your drum toms and congas, nothing beats (pun intended) the D2! The D2 accurately reproduces the warmth and punch you listen for from percussion, leaving out the muddy, indistinct "boom" that can mar recording. The D2's natural warmth also makes it a great mic for saxophones and other woodwinds requiri....
Check Stock

Shure SM7B Broadcast Microphone Bundle with Microphone Boom

  • Bundle Includes: 1x Shure SM7B Broadcast Microphone and 1x Konig & Meyer 23850 Mic Boom.
  • Shure SM7B: Flat. wide-range frequency response for exceptionally clean and natural reproduction of both music and speech.
  • Bass rolloff and mid-range emphasis (presence boost) controls with graphic display of response setting.
  • Improved rejection of electromagnetic hum, optimized for shielding against broadband interference emitted by computer moitors.
  • Konig & Meyer 23850: Suitable for Microphones up to .8kg with 5M XLR cable.
Check Stock

Image Dynamics IDMAX12 D2 V4 12" Dual 2-Ohm Coil Subwoofer 1000 Watts RMS

  • 12" Dual 4 ohm ID MAX V.4 Series Subwoofer | Pressed paper composite cone woofer | Parabolic EPDM rubber surround | Over 2" long linear excursion | RaDiaToR cooling system for heat dissipation | Radiant Diametric Torsional Reinforcement | High compliance suspension design | Flat spider with NOMEX cloth woven tinsel leads | High-temperature flat wire, flat wound voice coil | Inverted dust cap with logo | Powder coated alloy proprietary basket.
  • Power Handling: RMS: 1200 watts | Recommended Power Range: 300-1200 watts | 3-1/2" peak-to-peak surround excursion.
  • Nominal Impedance (IMP): Dual 4 Ω | DC Resistance (Re): 3.0 Ω | Resonance Frequency (Fs): 27.77 Hz | Equivalent Volume (Vas): 72.16 L | Electrical Q Factor (Qes): 0.73 | Mechanical Q Factor (Qms): 2.98 | Total Q Factor (Qts): 0.58.
  • Frequency response: 20-250 Hz | Peak Excursion (Xmax): 39 mm | Force Factor (BL): 16.68 Tm | Piston Area (Sd): 545.0 cm2 | Sensitivity: 85.20 dB 1w/1m.
  • Sealed Enclosure Suggestion: 1 cu.ft. | Ported Enclosure Suggestion: 1.75 cu.ft. | Displacement: 0.14 cu.ft. | Mounting Depth: 8.15 in | Outside Diameter: 12.40 in | Cutout: 11.02 in.
Check Stock

Sony Omni-Directional Electret Condenser Pencil Microphone

  • Excellent Sound Quality: Small diaphragm microphone capsule with Uni-directional characteristics delivers authentic sound of instruments with extremely low distortion..
  • Noise Elimination Construction: Two-part metallic body structure originally employed in the C-800G microphone prevents acoustic vibration, resulting in low noise and clear sound..
  • Flat and Wide Frequency Response of 20 Hz to 50kHz provides superb sound reproduction quality for High-Resolution Audio..
  • Low-Cut filter switch helps eliminate low-frequency noise and proximity effect..
  • Pad Switch: A -10dB pad switch provides added headroom and minimizes distortion caused by transient peaks..
Check Stock

M-Audio BX5 Carbon | 5' Single Speaker Studio Monitor with Magnetic Shielding (70-watt Class A/B Power)

  • Authentic, flat frequency response in a compact footprint.
  • New, bi-amplified 70 Watt (40+30) Class A/B amplification.
  • Acoustic Space Control lets you calibrate the BX5 to your mixing environment.
  • New waveguide with LED placement cues provide superior imaging.
Check Stock