Top Flat Head Roofing Nail

1\ Smooth Shank Solid Copper Roofing Nails 10 Gauge USA Made - Qty 50

  • Copper Roofing Nails are used in various roof installations, notably in slate roofs for their ease of removal if the slate needs to be replaced as well as their corrosion resistance and malleability..
  • They are also used for straps, gutters, and leaders as part of rain gutter systems, fascia installations, furniture restoration, and planked wooden boat construction. While designed for roofing, copper nails have other uses as well such as flashing and decorative finishing applications..
  • Copper roofing nails feature wide, flat heads for an increased bearing surface with diamond points and smooth shanks for ease of penetration. They are made entirely of solid copper and their corrosion resistance and malleability make them a good alternative to galvanized nails..
Check Stock

Round Plastic Cap Nail 1 Inch Roofing Nails Galvanized Tar Paper Nails for House Wrap Fastening Foam Board Roofing Felt Insulation Film 4000

  • Sufficient Quantity: you will receive 4000 pieces of plastic cap nails, ample amount to satisfy your daily use and replacement demands, you can also share with your friend.
  • Quality Material: the nail caps are made of quality plastic, reliable and sturdy, not easy to break or deform.
  • The nails are electro galvanized treatment, not easy to rust or corrode, providing you with a long use time.
  • Size Information: the nail cap is about 29/32 inches in diameter, the hole measures approx. 3 mm/ 7/64 inches in diameter, the roofing nails are approx. 1 inches in length.
  • Please check the dimension before purchasing.
  • Creative Design: the round plastic caps adopt a flexible round head that conforms to surfaces, making it harder for water to get under the cap, the integrated design saving you time and energy, convenient for you to use.
  • Where to Apply: the tar paper nails are widely applicable, suitable for securing roofing felt, sheathing, anchoring house wrap, fastening foam board, bringing you much convenience when using.
Check Stock

Roof Shingles Shingle Removal Tool Roofing Tools Pitch Hopper Shingle Nail Installer Roof Shingle Nail Puller Nail Remover Pry Bar For Safe Roof Shingles Replacement Roofing tools and Equipment

  • 【Durable & Anti-rust Steel.】Our Roof Shingles Remover is made of hard steel material and the 2-in-1 design is more accurate, efficient and safer for quick installing or pulling nails on your roof shingles. With the rust proof and polished coating, our roofing tools will be your practical tool for shingle repairing and replacement..
  • 【Nail-slot Design for Secure Grip.】With the unique nail groove design, you can inlay the nail and work in the narrow space smoothly. This Shingle Removal Tool will allow the roofing nails driven perpendicular to roof that bring longer lasting repairs without damaging the shingles with your hammer..
  • 【Claw Tip for Nail Puller.】Our Shingle Nail Installer can easily pull out the nail from roofing shingles. Just drive the claw tip under the nail and twist, easily pull out the nail with less efforts that will definitely safe time and money..
  • 【Easy to Use & Handy】This roof shingle nail installer is just handy to carry on with 1.1 inch in width and 11 inches in length, which make roofers work more accurate, efficient and safer. Our Roof Shingles are handy and fit for simple storage..
  • 【A Must Have for All Roofers.】This shingles removal tool is a must-have for all roofers to remove or repair old or worn-....
Check Stock

Grip-Rite 1-1/4-Inch 15? Electro-GALVANIZED Coil Roofing Nails Smooth Shank 600 nails per tub

  • For best results use Grip-Rite GRTCR175 15 degree coil roof nailer.
  • 1-1/4" x .120" x 3/8" Diameter Thin Flat Head, Coil Roofing Nails.
  • Clear, Resealable, Reusable, Stackable Plastic Tub. GREAT for Do-It-Yourself Projects.
  • Use with Grip-Rite GRTCR175 Coil Roofing Nailer.
Check Stock

DOTOOL 23 Gauge Pneumatic Pin Nailer 100-Fastener Air-powered Nail Gun and Safety Glasses for Carpentry, DIY Projects, Uphostery and Woodworking

  • 【Packaging Includes】Pneumatic nail gun package contains : Pneumatic Pin Nailer+2 x Hex Wrenches M4 (3mm) and M5 (4mm) +Lubricant +User Manual (Air compressors not included)..
  • 【Professional Nail Gun】This 23 GA depth adjustment nail gun features a durable aluminum body and an ergonomically designed comfortable grip. Work in the pressure range of 60 to 100 psi with the usual 1/4 inch NPT（air compressors are not included)..
  • 【Easy to Operate】Durable lightweight aluminum design and the magazine can hold up 100 nails. Pin nail length: 15/32"~1". We are committed to delivering superior value, first-class customer service and consistently high quality products..
  • 【Rugged & Reliable】The pneumatic nail gun has a durable and lightweight aluminum construction designed to withstand harsh operating conditions. Contact safety features require contact with the nail face before firing to prevent fire..
  • 【Depth Adjustable】Pneumatic brad nailer allows the user to pinpoint the depth of the nail. Correct driving depth of nail head can be adjusted without tool. It is a super tool for interior decoration, carpentry, flooring, roofing, molding, and door, etc..
Check Stock

#8 x 1/2\ Stainless Philips Pan Head Sheetmetal Screw (1/2\ to 2\ Lengths in Listing) 100 Sheet Metal Screws (#8 x 1/2 Inch)

  • Dimensions: 5/16" Hex Head and ~9/16" EPDM washer - Shaft is .242" (#14) - Length under head 1".
  • #14 Sheet Metal roofing screws are galvanized for corrosion resistance.
  • Sharp T17 type point securely fastens metal roofing to wood structures quickly and easily.
  • For installing roofing on a house, porch, airplane hangar, shed, pole barn, shop, barn or lean-to.
  • Rough Estimation - regular roofing project should require 80 screws per 10 x 10 section of roofing.
Check Stock

10PCS Dotting Tools Set for Nail Art, Embossing Stylus for Painting

  • ... designed with a large ball head and the other end with a smaller ball head, good for various types of dotting and nice for drawing lines and fine details.
  • Material: mainly made of acrylic and stainless steel, durable to use.
  • 15 Different nail art brushes: different types of nail art brushes are offered to you, like flat fan brushes, angled head brush, painting brush, flat brush, liner brush and so on, great nail brushes set for drawing fine nail art.
  • Nail drawing pens: 3 sizes of nail drawings are provided, easy to handle and operate, its brush tip works great in drawing small or tiny details, drawing small different patterns, and filling colors on nail tips, suitable for professional use or home use.
  • Applications: our nail art pens kit is suitable for you to decorate your nails, you can create your own DIY nail style as you like and good tools for learners, also could be as a gift to you mom, wife, sister and daughters, make nails look more charming and elegant.
Check Stock

10 Pieces Nail Drill Bits Set 3 Pieces Cone Tapered Barrel Carbide Nail Cuticle Drill Bit 3 Pieces Flat Top Large Barrel Carbide Bit 3 Pieces Round Top Large Barrel Head Nail Carbide Bit Gold

  • Durable and reliable: our nail drill bits are made of strong and quality cemented carbide and tungsten carbide, with strength, pointedness, durability....
  • Widely applicable: the set includes 10 nail drill bits of different styles and sizes, which fit most nail drill machines that use 3/32 inch bits, each....
  • Tapered barrel carbide nail drill bit: these cuticle drill bits consist of tapered barrels and flat top designs, ideal for nail trimming, filling....
  • Flat top large barrel carbide bit: the design of the flat top head works well in carving, grinding, sanding, polishing, it can deal with your own nail....
  • Large barrel head carbide bit: smooth round top large barrel head carbide bits have 3 different grit size, can be combined to polish nail surface or....
Check Stock

#14 Metal Roofing Screws 250 Screws x 1-1/2 Galvanized Hex Head Sheet Metal Roof Screw Self Starting Metal to Wood Sheet Metal Screws with EPDM Washer for Corrugated Roofing

  • Dimensions: 5/16" Hex Head and ~9/16" EPDM washer - Shaft is .242" (#14) - Length under head 1-1/2".
  • Polyurethane coated screw head is painted to closely match many brands of metal roofing (color may vary).
  • #14 Sheet Metal roofing screws are galvanized for corrosion resistance.
  • Sharp T17 type point securely fastens metal roofing to wood structures quickly and easily.
  • For installing roofing on a house, porch, airplane hangar, shed, pole barn, shop, barn or lean-to.
Check Stock

Roof Shingle Snake Tools, Shingle Removal Tool for Safe Roof Shingles Professional Roofing Tools and Equipment Shingle Nail Installer & Puller Pitch Hopper, Pry Bar Furnish Nail Puller Remover

  • 【Directly and Fastly Replace】 The roof snake makes replacing composition shingles safer, easier, and more accurate than traditional methods..
  • 【Nail Slot Design】 With the unique nail groove design, you can inlay the nail and work in the narrow space smoothly. Allow the roofing nails driven perpendicular to the roof which brings longer-lasting repairs without damaging the shingles with your hammer..
  • 【Claw Tip Design】 Easily pull out the nail from the roofing shingles. Just drive the claw tip under the nail and twist, easily pulling out the nail with less effort..
  • 【Caution on the Using】 When installing the new 3-tab shingles, do not bend or hit the surrounding shingles, and do not accidentally hit your fingers with the hammer during installation..
  • 【Customer Service】 If you have any questions, please feel free to contact us. We will offer the most sincere and high-quality after-sales service for you..
Check Stock

Deck Demon Wrecking Bar - 44 Inch Steel Deck Board Remover Tool - Save Time Removing Old Boards and Breaking Pallets - Heavy Duty, Non-Slip Handle with Dual Claw Head Nail Puller - Red, DD-201

  • ...e improvement projects from a comfortable standing position.
  • Maximum Leverage - this pallet breaker tool straddles the stud/floor joist/beam as a fulcrum point and provides a more stable position for prying to make board splitting more like paper splitting. Great to use as roofing tools, flooring tools.
  • Dual-Claw Head - Deck Demon’s dual-claw head is designed to fit over single and double joists and features 2 beveled cats paw nail puller slots, for removing nails and screws. The patented rocker design removes decking without damaging the joists.
  • Wood Working Tools And Equipment - solid steel, commercial grade demolition bar with a powder coated finish to protect against rust and corrosion for long lasting quality. The ultimate in roofing tools, flooring tools, deck tools, and siding tools.
Check Stock

#12x1-1/2' Metal to Metal Type #3 Galvanized/ZINC Hex Head Drill Point Metal to Metal Roofing Screws. 9/16' EPDM Washer

  • #12 Metal to Metal #3 Roofing Screws with Drill Point tip. 5/16" Hex Head, 9/16" Washer.
  • 250 COUNT Metal-to-Metal Galvanized Zinc roofing screws are a natural gray color & rust resistant.
  • Hex washer head, drill point roof screw with EPDM washer seal, seals roofing panel to screws..
  • #12 - 3 Metal to Metal Screw is designed for attaching roofing & wall panels to steel buildings.
  • Coarse Threaded Type 3 Screws generally used in thinner or lighter steel or aluminum products.
Check Stock