Top Flexible Connection Pipe

HNHYNSY PVC250 Exhaust Air and Sewage Elbow 90 Degree White 400 Sewer Sewage Pipe Elbow Joint (Size : 400mm)

  • This product is made of PVC raw materials, and each material has been tested for resistance to damage. The workmanship is thick, sturdy and durable..
  • Wide range of uses, thick and durable, insulation and flame retardant, compression and explosion resistance.
  • Complete specifications for your needs, complete specifications and sizes.
  • The pipe wall is smooth, no foreign matter, no protrusion, fluid resistance is reduced, and the transportation is faster.
  • Suitable for household water pipe connection, household sewage pipe connection, factory sewage pipe connection, etc..
Check Stock

Floshine 2.5 in Lap Joint Band Clamps,Exhaust Muffler Clamp 4 PCS，2.5 Exhaust Pipe Clamps preformed Stainless Steel

  • Application--2.5" Exhaust clamps are a simple and quick tool for connecting exhaust system components, such as exhaust pipes, mufflers and catalytic Flexible disassembly and assembly methods allow maintenance while protecting the exhaust pipe from being twisted.
  • No welding design--This 2.5 exhaust clamp is tightly fitted 360° to evenly withstand tensile forces and prevent deformation and leakage of the exhaust pipe.No welding design of Lap joint exhaust sleeve clamp makes installation and removal easier and faster.
  • Component parts--304 stainless steel band,steel gasket,aluminum alloy I-block and zinc-plated flange bolt and nut.Make sure that the stainless steel surface is tight against the exhaust pipe and the nut is tightened when installing.
  • Non-rusting and corrosion resistant--Floshine Exhaust clamp is used for 2.5" OD to 2.5" OD exhaust pipe,mffler,catalytic converters connection.Stainless steel material has good corrosion resistance and is not easy to rust, providing a longer service life..
  • WARRANTY--Floshine offers a 5-month warranty and we are committed to enhancing the user experience.Please feel free to contact us with any questions about the product.
Check Stock

ROADGIVE Funnel Automotive Steel Bendable Universal Spout Funnel with Filter and 23.6' Flexible Pipe Long Neck Oil Funnel for All Automotive Oils, Lubricants, Gas, Diesel Fuel and Other Liquids

  • ★【SPECIFICATIONS: 】 The funnel is made from high quality Iron, which is very durable and can be bent in any angle. Funnel diameter:5 -1/2", The length of the funnel tube: 23- 3/5", Flexible Pipe diameter: 3/8"..
  • ★【FUNNEL WITH FILTER :】 Metal funnel can effectively filter impurities. It can prevent impurities from entering so it can ensure the purity of the fuel.There is a threaded connection between the funnel and flexible hose..
  • ★【ANY CURVED FUNNEL: 】The flexible steering funnel can realize multi-angle liquid infusion and liquid transport in the oil pipe that is difficult to reach through other funnels..
  • ★【EASY TO STORE:】Funnel is equipped with an iron hook that allows us to hold it with hand to prevent the funnel from tilting to make the infusion more stable. You can hang it on the wall without using the funnel..
  • ★【WIDE APPLICATION:】The funnel is widely used for emergency refueling/refueling of vehicles such as cars, motorcycles, trucks, etc. The flexible spout extension works great and is designed so that it doesn't catch a lot of whatever fluid you're pouring through it..
Check Stock

USA SEALING ZUSA-TF-PTC-526 Nylon Push to Connect Tube Fittings Female Branch Tee Black 1/4 PTC x 1/4 NPT Female

  • Pipe Thread Material: Nickel-Plated Brass.
Check Stock

Flowtech 50225FLT Purple Hornies Glasspack

  • Heavy gauge shell for maximum durability.
  • Expandable bushings for custom applications, Available stainless steel or painted.
  • Continuous Roving Fiberglass for powerful tone and long life, Straight through design for maximum flow and power.
  • Muffler Body Height: 3.5″, Muffler Body Length: 26″, Muffler Body Width: 3.5″ , Muffler Body Material – Aluminized, Muffler Inlet Configuration – Center, Muffler Outlet Configuration:Center,Muffler Outlet Connection Type: Pipe Connection,Muffler Outlet Diameter:2.25″.
  • Muffler Inlet Connection Type: Pipe Connection, Muffler Inlet Diameter: 2.25″, Muffler Inlet Diameter Designation: Inside Diameter , Muffler Overall Length: 31″ , Muffler Shape:Round.
Check Stock

DANCO Decorative Bathtub Faucet Spout with Pull Up Diverter | 6 Inch Length | Chrome Finish (10315)

  • MODERN DESIGN - The Danco tub spout is ideal for replacing and updating your worn-out, non-functioning tub spout and the decorative design will give a fresh update to your bathtub..
  • CONNECTION SIZE: Designed to fit 1/2 in. Copper Pipe Slip Connection, 1/2 in. Male Threaded Connection with Short Stub out connection, 1/2 in. Male Threaded Connection with Long Stub out Nipple and 3/4 in. Male Threaded Connection with Short Stub Out Nipple..
  • ADAPTERS INCLUDED: This Tub spout DIY installation kit comes with an extension nipple and adapter to ensure a snug fit onto your existing stub out nipple pipe to replace your existing tub spout..
  • DIVERTER INCLUDED: This tub spout includes a diverter lift rod to allow water stream to flow though downward into the tub or upward into showerhead..
  • TUB SPOUT REACH: The bathtub faucet spout has a 5 1/2 in. reach..
  • BUILT TO LAST: The durable metal construction provides strength, longevity and will endure the rigors of everyday use.
  • HASSLE-FREE INSTALLATION: You will need Phillips screwdriver, sandpaper, silicon grease and pipe thread tape to install and to help prevent leaks and provide a better seal during installation..
  • CHROME FINISH resists corrosion and tarnishing and will complement your existing bathroom fixtures..
Check Stock

POWERTEC 70149 Dust Control Flex Cuff with Steel Clamps 4-Inch,Black Metallic

  • INCLUDES: (1) Flexible Cuff Coupler with (2) Steel Clamps.
  • FUNCTION: Provides a perfectly sealed, airtight connection between a pair of 4 inch OD dust collection equipment ports, pipes or fittings.
  • EASY TO USE: These reusable flex cuffs are easily installed and can be removed without the need for assorted screws or duct tape.
  • PREMIUM BUILD: Made with a durable rubber construction to withstand long-term wear and tear, and possesses a flexible design that seamlessly conforms to slight diameter differences in fittings.
  • DIMENSIONS: O. D 4-9/16” and I. D 4” | Connects to 4 inch nominal outer diameter adapter or dust collection pipe.
Check Stock

EVIL ENERGY 2.0' Exhaust Narrow Band Muffler Seal Clamp Stainless Steel 2PCS

  • Joins 2.0 inch OD pipe to 2.0 inch ID pipe. Exhaust clamp is a simple, effective way to connect heavy-duty exhaust system components such as pipes, mufflers, catalytic converters, headers, manifolds. Torque: 63 N·m. Package: 2pcs..
  • Connection Type: ID-OD slip fit connection with either straight or "Z" compression slit. This narrow exhaust band clamp commonly use on slotted pipes or stainless steel connection where disassembly for service is likely..
  • Distributes the clamping force evenly over the entire 360° to provide tight sealing and prevent leaks and prohibit exhaust pipe distortion. Material: 304 stainless steel strap and mild steel hardware, serviceability, durability and reusable..
  • Easy to handle and disassemble. Suggestion: Wrap the pipe with several layers of aluminum tape over the clamping surface to take up for slight out-of-round and help seal..
  • EVIL ENERGY provides stainless steel exhaust clamp 3-month warranty. We value your shopping experience and strive to offer a high-quality product and service..
Check Stock

Stanbroil 3/8\ X 12\ Non-Whistle Flexible Flex Gas Line Connector Kit for NG or LP Fire Pit and Fireplace

  • Easy to installation and use, highly durable, Corrugated flexible flex gas line with feature of high temperature resistance.
  • 3/8" OD x 1/4" ID 12 inch Stainless steel pipe coated black gas line with fittings.
  • 3/8" Male Flare x 1/2" Male NPT fitting end, 3/8" Male Flare x 1/2" Female NPT Fitting. Brass 90 degree fitting for customer connection convenience.
  • CSA certified, fit for NG or LP fireplaces and 003c90K BTU with a 3/8" Connection Hub fire pit and fireplace burners.
  • There is a staggered pitch every 2" to Eliminate Whistling.
Check Stock

EVIL ENERGY 3 Lap Joint Exhaust Band Clamp Preformed 304 Stainless Steel

  • Joins 3.0 inch OD Pipe to 3.0 inch ID Pipe. Lap joint exhaust clamp is a simple, effective way to connect heavy-duty exhaust system components such as....
  • Connection Type: ID-OD slip fit connection, preferably with compression slit. This lap joint clamp commonly to join different size pipe..
  • Distributes the clamping force evenly over the entire 360° to provide tight sealing and prevent leaks and prohibit exhaust pipe distortion..
  • Material: 304 stainless steel strap, zinc-plated flange bolt and nut, steel gasket, aluminum alloy I-block. Lap Joint band clamp requires that the....
  • EVIL ENERGY provides stainless steel exhaust clamp 3-month warranty. We value your shopping experience and strive to offer a high-quality product and....
Check Stock

Floor Flange Trim Plate, Steel, 3/4 In

  • Price For: Each Inside Dia.: 3/4" Max. Pressure: 150 psi Pipe Type: Pipe Nipple Pipe Size (Nominal): 1/2" Seamless/Welded: Welded Outside Dia.: 3/4" Pipe Schedule: 40 Wall Thickness: 1/16" Temp. Range: -60 Degrees to 450 Degrees F Overall Pipe Length: 4" Pipe Connection Type: Threaded on Both Ends Standards: ASTM A 312 Item: Nipple.
  • Country of Origin (subject to change): China.
Check Stock

EZ-FLO 20215 Loose Key Hose Bibb - 3/4 FIP

  • The loose key hose bibb is equipped with a 3/4 inch Female Inlet Pipe (FIP) connection.
  • The loose key hose bibb is equipped with a 3/4 inch Female Inlet Pipe (FIP) connection Constructed of a heavy-duty brass body to resist corrosion and....
  • Compatible with standard garden hoses with a 3/4 inch Male Hose Thread (MHT) connection.
  • Designed for use in irrigation applications only - NOT intended for drinking water.
Check Stock