Top Flexible Printed Circuit

BCQLI 100 PCB Circuit Board Thermal Transfer Paper A4 Size Transfer Paper DIY Circuit Board Special Paper

  • Size: A4 / Color: Yellow / Quantity: 100.
  • 1 with a laser printer to print circuit board wiring diagram of the heat transfer paper surface(Note: can only be printed with a laser printer can not use inkjet printer!).
  • 2 with a laminator adjusted to between 150-180 degrees Celsius, the heat transfer paper printed with a circuit diagram deposited in the copper-clad side for transfer.
  • the system can also be used in place of iron plate machine, hand transfer.
  • 3 After printing remove the transfer paper, CCL will be etched into the ferric chloride solution.
  • 4 Finally, cleaning with gasoline toner board, sanding paper or water in the water to flush out carbon(For more success stories please check customer reviews).
Check Stock

Drawing With Static Electricity

  • ...ick & Accurate Network Cable Collation: The cable tracer can search for wires in various applications, including buried wires, single stranded wires, broken wires, etc. Suitable for wires, fixed telephones, coaxial cables, automotive cables, etc. Note: our electrical circuit tracer is not suitable for live circuit!.
  • Flexible Tone Generator Wire Tracer: The wire toner tracer receiver is equipped with an adjustable sensitivity dial, which allows you to accurately trace a wire in congested places. And also, you can use the wire toner to find a intermittent circuit problem. Just flexing wires or connectors, and then you will hear that there is a change in the receiver tone..
  • Short & Open Finder Circuit Tester: In CONT mode, you can check the short circuit and open circuit in the line. The attached RJ11 connector allows you to easily test the telephone system (in CONT mode, you need to use two alligator clips)..
  • Tone Tracing Probe Kit: In TONE mode, you can quickly track cables passing through ceilings, under floors, interior wall barriers, etc., without the risk of not knowing the exact location of the wires (only one alligator clip is used in TONE mode)..
  • No Risk : Our wire tester electrical tool has One-year Warranty! And, we are always put our customers i....
Check Stock

Enclosure Electronic DIY Circuit Board Project Aluminum Box Cooling Case 55 x 106 x 150mm, Aluminum Alloy Box Split type

  • Protection board: Aluminum Cooling Box can quickly heat dissipation, preventing internal printed circuit board from burning out.Material: Aluminum Alloy.
  • DIY project: You can use this custom enclosures for your DIY project.Dimensions: Approx. 55 x 106 x 150mm / 2.2 x 4.2 x 5.9in. Shell / Baffle Thickness: 1.25-1.5mm.
  • Reasonable design: Surface sandblasting and brushed treatment, wear resistant and beautiful, comfortable hand feeling..
  • Good performance: Good heat dissipation and excellent electromagnetic shielding performance.Product Structure: Split type.
  • Wide range of applications: Can be used for decoders, controllers, electronic products, heat dissipation aluminum casing, printed circuit board wiring aluminum box, anti-thunder aluminum shell, DIY, etc..
Check Stock

Engineering Notebook: Graph Paper Notebook Quadrille 4 X 4 Quad Ruled Book: 100 Pages (.25″ Lab Grid Format), 8″ x 10″ (Notebooks for Students)

  • Electrical Engineer Keychain, Circuit Board Keychain, Electronic Engineering, Computer Engineering, Gift for PCB Printed Circuit Board Design Engineer, Electrical Engineer, Engineer Teacher, Engineer Graduation Gift.
  • Engineer Charm, Circuit Board Charm, Computer Charm, Electric Plug Vector Charm.
  • Diameter of Key Ring : 1.38 Inches (3.5 cm).
  • Length of Keychain : 2.95 Inches (7.5 cm).
  • Free velvet gift bag to pack and ship our keychain.
Check Stock

Engineer Keychain Circuit Board Keychain Electrical Engineer Gift Electronic Design Engineering Computer Engineering Computer Laptop Charms Engineer Teacher Gift Engineer Student Graduation Gift

  • Electrical Engineer Keychain, Circuit Board Keychain, Electronic Engineering, Computer Engineering, Gift for PCB Printed Circuit Board Design....
  • Engineer Charm, Circuit Board Charm, Computer Charm, Electric Plug Vector Charm.
  • Diameter of Key Ring : 1.38 Inches (3.5 cm).
  • Length of Keychain : 2.95 Inches (7.5 cm).
  • Free velvet gift bag to pack and ship our keychain.
Check Stock

TABIGER Desoldering Wick & Desoldering Pump, 3 Pcs Solder Sucker & 2 Pcs Solder Wick(2.5mm Width, 1.5m Length), Solder Remover Kit for Desoldering

  • 【ONE-HANDED USE DESIGN】 The Solder sucker with simple construction, so whether you are right or left-handed, you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready..
  • 【HIGH QUALITY AND POWERFUL SUNCTION】 The solder sucker has an aluminum bronze frame and a high pressure vacuum which can remove solder from a printed circuit board effectively..
  • 【ALLOY BRAIDED SOLDER WICK】 Precision weaving solder braid with the size 2.5mm Width, 1.5m Length, it could help clean the spare solder on the pin away to avoid short circuit, especially in small, hard to reach areas..
  • 【DURABLE DESOLDERING IRON TOOL】 The body of desoldering pump is made of aluminum, which can resistance to beat, corrosion and have good heat dispersion, the desoldering wick has geometrically-precise weave with copper and rosin, which show no nicking or bending after a long time..
  • 【A MUST-HAVE SOLDER REMOVAL KIT】 The solder sucker can be used for broad place, which the solder wick can be used for small, hard to reach areas, all together can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards..
Check Stock

MEIRIYFA USB Header Extension Cable, USB 2.0 9-Pin Male to 9-Pin Female Internal Motherboard Header Cable for USB Ports, Expansion Cards and Motherboard Ports 20.3 inches（2 Pack)

  • 【Applicability】: USB 2.0 9-pin male to 9-pin female internal motherboard header cable, jumper to reduce and eliminate stress on rear USB expansion board or front panel USB ports as well as expansion card and motherboard port connections..
  • 【Extendibility】: The USB 2.0 header extension cable extends your 9-pin USB IDC motherboard header cable length by 20.3inch/515mm, which is more convenient and efficient..
  • 【How to use】: Connect the motherboard USB 9-pin header port to the 9-pin front panel of the PC case. USB enclosure to motherboard header cable, USB internal header cable, USB header cable..
  • 【Safety】: The 9-pin USB 2.0 header protects against short circuit socket design, which can prevent the risk of accidental removal of the circuit board, pins and case short circuit..
  • 【Material】: The 9-pin jumper has a flexible PVC sheath, which is flexible and environmentally friendly, which greatly improves its durability and life..
Check Stock

Tool Aid SG 25100 Short Tester

  • Transmitter and Receiver LEDs indicate open or short circuit situations, making them simple to use..
  • On/Off, Test, and Probe length buttons on the receiver "supple probe.
  • Receiver: On/Off button / Test button / Probe length: 7" flexible probe.
  • Tone/Continuity LEDs (61cm length, approximate).
Check Stock

SATUMIKO LED Halloween Mask Sound Reactive Light Up Mask Scary Masks for Costumes Cosplay,Music Party,Rave Events, EDC (Beetles)

  • ✿ ORIGINAL DESIGNS. We are specialize in design and produce light up glow products for party decorations in a variety of themes. All masks are our ORIGINAL DESIGNS,it is exclusive and manufactured for SATUMIKO only,Our team keeps developing new products to catch up the trend and strive to offer the latest fashions of light up prodcuts with good customer service..
  • ✿ HOW TO USE.The novelty masks is power by 2AAA battery pack,it is flash and change colors based off the frequency of the surrounding voice or music,also you can adjust the sensitivity with a scroll button on the side of the battery pack..
  • ✿ HIGH QUALITY. Use the quality luminous material to highlighted the mask,the mask ground is made from soft fleece..
  • ✿HOW TO WASH:Please take the panel and flexible printed circuit off carefully,the FPC is very easy to broken..
  • ✿SIZE FITS.One size fits all,please adjust the velcro of the side to fit your head..
Check Stock

55 x 106 x 200mm Enclosure Electronic DIY Circuit Board Project Aluminum Box Cooling Case Aluminum Alloy Box, Split Type, Black/Sand SilverElectrical Boxes((sand black with bending plate))

  • Rapid cooling: Aluminum Cooling Box can quickly heat dissipation, preventing internal printed circuit board from burning out..
  • Dimensions: Approx. 55 x 106 x 200mm / 2.2 x 4.2 x 7.9in.Shell / Baffle Thickness: 1.25-1.5mm.You can use this custom enclosures for your DIY project..
  • Reasonable design: Surface sandblasting and brushed treatment, wear resistant and beautiful, comfortable hand feeling..
  • Good performance: Good heat dissipation and excellent electromagnetic shielding performance..
  • Wide range of applications: Can be used for decoders, controllers, electronic products, heat dissipation aluminum casing, printed circuit board wiring aluminum box, anti-thunder aluminum shell, DIY, etc..
Check Stock

Zing Green Products Electrical Lockout Tagout Kit with Hasps, Safety Padlocks, Lockout Tags and Circuit Breaker Lockout Devices

  • Lockout Kit: Includes 2 keyed-different padlocks with flexible labeling system, 5 lockout tags and cable ties, 2 steel lockout hasps, 2 circuit breaker lockouts, a dielectric nylon lockout hasp and bag.
  • Safety Padlocks: 2 keyed-different lockout tagout locks feature multilingual labeling system, 6-pin key-retaining and auto-locking cylinder, steel shackle, aluminum body, and thermoplastic coating.
  • Dielectric Hasps and Safety Tags: Steel hasps feature 1” x 1.5” interior jaw diameter and nylon-coated handle.
  • 5 premium “do not operate” tags include cable ties.
  • Circuit Breaker Lockout Device: 120/270V clamp-on circuit breaker padlock device features snap-on/removable cleats.
  • 2 universal multi-pole circuit breaker lockouts also included.
  • USA Safety Product Supplier: Zing Green Products is a USA-based and -owned supplier of high-quality lockout and tagout products, and an expert in lockout/tagout (LOTO) compliance.
Check Stock

38 x 88 x 100mm DIY Aluminum Case Electronic DIY Instrument Project Split Type Enclosure, Circuit Board Aluminum Case,Aluminum Box Project for Preventing Internal Printed Circuit Board

  • Durable: Good heat dissipation and excellent electromagnetic shielding performance. Aluminum Box Thickness: Between 1.25-1.5mm.
  • Simple design: Machine die-casting, surface oxidation, beautiful appearance. Size: Approx. 38 x 88 x 100mm / 1.5 x 3.5 x 3.9in.
  • DIY project: Adopt split type design, you can assemble and design the box you want by yourself.You can use this custom enclosures for your DIY project..
  • Founction: Aluminum Cooling Box can quickly heat dissipation, preventing internal printed circuit board from burning out..
  • Scope of application: Can be used for electronic product cooling aluminum housing, printed circuit board wiring aluminum box, anti-thunder aluminum housing, DIY, etc..
Check Stock