Top Flow Control Hydraulic Valves

Habitech 2-Pack In-Line Barbed Ball Valve 13mm For 1/2 Inch Tubing .520 ID - Regulate and Shut-Off/On Water Flow

  • Important: Be sure to check the sizes and buy the right valve. This 13mm ball valve works with 1/2" tubing with 0.520 Inside Diameter (ID). If you need valves for 1/2" drip irrigation tubing, which has a larger inside diameter 0.570 to 0.620, then select the 16mm size valve..
  • Complete Flow Control: 1/2-inch inline ball valves (2 Pack) are the perfect way to regulate the water flow of your aquarium, aquatic or hydroponic systems with a simple turn of the knob. Slip your tubing onto the barbed ends of this shut-off valve coupling to control, disperse, slow, divert or completely stop water flow..
  • Fully Adjustable: Adjust the flow anywhere from full-open to full-stop. Easy to install and use with clear on and off markings. Compactly sized and smooth to turn, these quality acetal barb ball valves won't stick like PVC ball valves..
  • Versatile: Customize a secondary water zone, create individual dripline control, use as tank valves, drain valves, return valves or in any situation where fluid restriction is needed. For use with irrigation, aquarium plumbing, pump return line, saltwater applications, RV camper and trailers, pex tubing, hydroponics, and aquaponics..
  • Leak-Free Seal: These non-corrosive plastic flow valve fittings are guaranteed to pro....
Check Stock

Chief G Series P80 Hydraulic Directional Control Valves - Hydraulic Speed Control Valve - 3 Spool, 21 GPM, 4 Way 3 Pos Spring Center, SAE 10 Inlet and Work Ports, SAE 12 Outlet Ports, 3625 PSI

  • Durable - The hydraulic directional control valve is a cast-iron structure, which can be used for a long time.
  • 5 Spool Hydraulic Valve - The hydraulic valve can manage and guide the flow of hydraulic oil between hydraulic pumps and hydraulic cylinders, motors, tanks, and more.
  • Double Acting - This control valve comes with 5 spools and SAE O-ring in/out ports. All spools are standard double-acting spools, which are very suitable for double-acting cylinders.
  • High Efficiency - The relief valve range is up to 3600 PSI and the maximum flow is up to 13 GPM.
  • Widely Used - The hydraulic directional control valve is very suitable for small tractors, tractor loaders, fellers, forklift environmental vehicles, light loaders, log splitters, and more.
Check Stock

Lubeworks Oil Control Valve Digital Meter Dispensing Nozzle 10GPM/35LPM Heavy Duty Air Operated Pneumatic 1/2\ inch NPT Inlet Pressure Range 7-725 Psi 5-50 Bar with Flexible Spout (Not for Gasoline)

  • ... consistent measurements and smooth dispensing during operation.
  • SAFETY and PROPER USE - Our Control Valves include rubber protection to absorb shock or an impact resistant polypropylene body, both delivering prolonged lifetime in workshops.
  • Lubeworks Control Valves are only suitable for: oils, motor oils, synthetic hydraulic oil, gear oil and transmission fluids, w/ a MAX working temperature of -10°C/ 14°F to 60°C/ 140°F.
  • Follow manual instructions for setup and always wear protective glasses/goggles or gear when operating lubrication/transfer equipment.
Check Stock

Moen U362CIS M-CORE 3-Series Mixing 3 or 6 Function Integrated Transfer Valve with CC/IPS Connections and Stops, or Unfinished

  • USE WITH TWO OR THREE SHOWERING DEVICES: Integrated M-CORE Transfer Valves can control 2 or 3 showering devices, a simple transfer cartridge modification changes the valve’s flow from two outlets to three outlets.
  • FUNCTIONS: When using 2 showering devices, the valve has 2 independent and 1 shared functions.
  • When using 3 showering devices, the valve has 3 independent and 3 shared functions.
  • IMPORTANT: When using 3 Showering Devices, transfer valve cartridge must be modified. Simple Cartridge Modification changes the valves flow from two outlets to three outlets. See Transfer Valve Instructions for additional information..
  • IMPORTANT: When using 2 Showering Devices, designated outlet 3 must be CAPPED. Caps sold separately..
  • PRESSURE-BALANCING CAPABILITY: M-CORE valves, with new 3-Series trim, have pressure-balancing capabilities designed to control temperature fluctuations in the event of water pressure changes in the home.
  • VOLUME CONTROL: Features volume control, allowing you to adjust the flow of water for greater functionality.
  • VERSATILE DESIGN: M-CORE’S adaptability allows the valves to be roughed in with the option of functionality and style changes that don't require removing or changing the valve(s).
Check Stock

3/4\ SAE Skid Steer Bobcat Flat Face Hydraulic Quick Connect Couplers with Dust Caps,The Universal Quick Disconnect Coupler Bobcat Case/New Holland, Kubota

  • The flat face hydraulic quick connect couplers with 3/4" SAE thread+ 1/2 body, impoved design high flow performance and maximum service life.
  • The universal quick disconnect coupler connect interchange with most models of skid steers loaders including Bobcat Case / New Holland, Kubota.
  • Applications:used in the agriculture, construction, logging industries etc,skid loader attachment,hydraulic tools,Agricultural implements,equipment attachments, drain lines,constructionindustrial hydraulic lines..
  • Non-spill flush face valves minimize fluid losses.
  • Made by harden steel construction with zinc nickel plating for superior corrosion resistance ,and one hand push-to-connect operation.
Check Stock

Moen U232CIS M-CORE 3-Series Mixing 2 or 3 Function Integrated Transfer Valve with CC/IPS Connections and Stops, or Unfinished

  • USE WITH TWO OR THREE SHOWERING DEVICES: Integrated M-CORE Transfer Valves can control 2 or 3 showering devices, a simple transfer cartridge modification changes the valve’s flow from two outlets to three outlets.
  • IMPORTANT: When using 3 Showering Devices, transfer valve cartridge must be modified. Simple Cartridge Modification changes the valves flow from two outlets to three outlets. See Transfer Valve Instructions for additional information..
  • IMPORTANT: When using 2 Showering Devices, designated outlet 3 must be CAPPED. Caps sold separately..
  • PRESSURE-BALANCING CAPABILITY: M-CORE valves, with new 3-Series trim, have pressure-balancing capabilities designed to control temperature fluctuations in the event of water pressure changes in the home.
  • VOLUME CONTROL: Features volume control, allowing you to adjust the flow of water for greater functionality.
Check Stock

Moen U362XS M-CORE 3-Series Mixing 3 or 6 Function Integrated Transfer Valve with Crimp Ring PEX Connections and Stops, or Unfinished

  • USE WITH TWO OR THREE SHOWERING DEVICES: Integrated M-CORE Transfer Valves can control 2 or 3 showering devices, a simple transfer cartridge modification changes the valve’s flow from two outlets to three outlets.
  • FUNCTIONS: When using 2 showering devices, the valve has 2 independent and 1 shared functions.
  • When using 3 showering devices, the valve has 3 independent and 3 shared functions.
  • IMPORTANT: When using 3 Showering Devices, transfer valve cartridge must be modified. Simple Cartridge Modification changes the valves flow from two outlets to three outlets. See Transfer Valve Instructions for additional information..
  • IMPORTANT: When using 2 Showering Devices, designated outlet 3 must be CAPPED. Caps sold separately..
  • PRESSURE-BALANCING CAPABILITY: M-CORE valves, with new 3-Series trim, have pressure-balancing capabilities designed to control temperature fluctuations in the event of water pressure changes in the home.
  • VOLUME CONTROL: Features volume control, allowing you to adjust the flow of water for greater functionality.
  • VERSATILE DESIGN: M-CORE’S adaptability allows the valves to be roughed in with the option of functionality and style changes that don't require removing or changing the valve(s).
Check Stock

International Door Closers Model 312 with

  • 90 Degree Backstop (HO) Hold Open - Multi-sized closer w/Adjustable Spring Power for range of sizes.
  • Adjustable OHC from 8.5lbs of Opening Force to medium spring tension..
  • Adjustable after installation. Closing and Latching speeds controlled by separate regulating valves..
  • ADA (Handicap) with 8.5 lb opening force for use on center pivoted installations - UL Listed.
  • Stable hydraulic door check fluid for any climate. Two Speed Control Valves fully adjustable..
Check Stock

International Door Closers Model 312 with

  • 90 Degree Backstop (HO) Hold Open - Multi-sized closer w/Adjustable Spring Power for range of sizes.
  • Adjustable OHC from 8.5lbs of Opening Force to medium spring tension..
  • Adjustable after installation. Closing and Latching speeds controlled by separate regulating valves..
  • ADA (Handicap) with 8.5 lb opening force for use on center pivoted installations - UL Listed.
  • Stable hydraulic door check fluid for any climate. Two Speed Control Valves fully adjustable..
Check Stock

International Door Closers Model 311 with

  • 105 Degree Backstop No Hold-Open - Multi-sized closer w/Adjustable Spring Power for range of sizes.
  • Adjustable OHC from 8.5lbs of Opening Force to medium spring tension..
  • Adjustable after installation. Closing and Latching speeds controlled by separate regulating valves..
  • ADA (Handicap) with 8.5 lb opening force for use on center pivoted installations - UL Listed.
  • Stable hydraulic door check fluid for any climate. Two Speed Control Valves fully adjustable..
Check Stock

FibroPool 1 1/2\ POSI- Close Non- Lube Check Valve

  • Medical grade PVDF material, safe and nontoxic.
  • Normal performance under -30 ℃ to 150 ℃, excellent chemical and hydrolysis resistance, outstanding ozone, UV and weather resistance..
  • Size Reference:These Check valves measures approx. 4 mm in diameter and 38 mm/ 1.41 inches in full length, please make sure of our size when you buy it..
  • Perfect for the hydraulic system to prevent reverse flow of material, or compressed air for pneumatic system to prevent.
  • Flow smoothly, small fluid resistance, good sealing performance, short spool stroke, small off valve impact force, attractive appearance and high reliability..
Check Stock

Cardone 27-7504 Remanufactured Power Steering Gear

  • 100% computerized hydraulic testing is performed for proper flow, leakage and performance to ensure perfect fit and function.
  • All critical components (i.e. campacs, spool valves, etc.) are triple tested to ensure product reliability.
  • All units are built with 100% new seals and o-rings.
  • Sector shafts and pistons are 100% processed to ensure surface finish is within O.E. tolerances.
Check Stock