Top Flow Meter With Display

TERA PUMP | 4.5 GPM Electronic 35L Metered Pail Transfer Pump Flow Control Nozzle 16.5 in 22.6 in Intake Tube Fits 5 Gallon Pail Buckets Engine Oil Hydraulic Fluid DEF Gas Diesel AG Chemicals

  • Flow Rate of 4.5 Gallons/ Minute with Engine Oil (1.4 GPM) Hydraulic Fluid DEF Gasoline Diesel AG Chemicals Washer Fluid Antifreeze.
  • Suction Tube is Adjustable to 16.5 in to 22.6 in | Flexible Discharge Hose: 6 foot with Flow Control Nozzle.
  • Transfer Liquid to Cars, Boats, Tractors, ATV/UTV, Generators, Snowmobiles etc..
  • Precise Flow Rate with 35L Digital Oil Meter with LCD Display.
  • Pump, Meter, Pail Lid, and Power Adapter are Included.
Check Stock

DIGITEN Water Flow Control Meter LCD Display Controller+G1/2\ Water Hall Sensor Flow Meter Flowmeter Counter 1-30L/min+G1/2\ Solenoid Valve Normally Closed N/C+DC 12V Power Adapter

  • ★【Large LCD Screen & Monitor Flow Rate】: Support reading with Liter or Gallon unit, LPM/GPM switchable. DFC15 will display the flow rate(the REAL-TIME volume of liquid which passes per minute), the flow total volume and sensed temperature clearly..
  • ★【Quantitative Control & Alarm Function】: The controller will turn off the solenoid valve automatically when flow reach to the setting value you desire, it's easy to install and control. It can automatically stop water filling into your concrete mixer. When the total amount reaches the setting value, the controller will alarm..
  • ★【Work with All Hall Effect Flow Sensor】: It can work with various different flow sensors through adjust the K value. High quality, come with temperature sensor, it can measure liquid temperature..
  • ★【Wide Applications】: Swimming pool, water dispenser, coffee machine, drip irrigation system, beer brewing, etc. For example, if you want 5 liters of water, you can set up 5 liters of water on the DFC15 controller. When the water in the container reaches 5 liters, the controller will control the solenoid valve to close it, the water flow automatically stops, and you just get 5 liters of water. Please select a suitable flow meter. An oil flow meter is required for liqu....
Check Stock

0386-0849 Nitrogen Flow Meter 1/4 Inch SAE Flare Inlet and Outlet Connection 50PSI 0-75CFH Nitrogen Flow Indicator for Brazing

  • Easy to Use: this nitrogen flow meter has 1/4" female torch inlet connector and 1/4" male torch outlet connection, can be used with nitrogen-purging....
  • Nitrogen Flow Indicator: There is a float inside the flow meter, it can help you confirm whether nitrogen is flowing during brazing, providing low....
  • Precise Control: The th folw indicator can control the gas flow through the copper tube during the brazing process, the flow accuracy can reach 3-4....
  • Enhance Safety: This product provides extremely low flow through high precision gas control and has an overpressure safety relief rupture disc, so it....
  • Excellent Material: The valve body structure of The meter is made of brass, which is resistant to corrosion and rust, and is durable.
Check Stock

DAE AS200U-75 Water Meter, 3/4\ NPT Couplings, Measuring in Gallons

  • Horizontal Inline mount with dial facing upward. For the water meter to be installed vertically with water flowing upward, please refer toDAE V-75. Or DAE PVM-75, DAE VM-75P which can be installed in any position, vertically or horizontally, water flowing downwards or upwards, dial facing upwards, downwards or side-way..
  • For upgraded AS200U-75P, Cloud Metering available (2nd picture) with DAE CC2030 Gateway. CC2030 will collect water usage from DAE AMR (for 16 meters) or AMR130AN (for 1 meter) and send them to cloud server through Ethernet. With PC, cell phone, the landlords can see real time data, monthly water usage & billing reports to their tenants. If there is abnormal usage (ex. Broken piping), an email alert will be sent to your cell phone..
  • For upgraded AS200U-75P, ready for use with CO-10 (Electronic Pulse Counter) or CO-10 KIT - An inexpensive remote reading solution (6th picture). Can also use with DAE AMR130 (Auto Meter Reading Module for single water meter) and AMR (for 16 water meters) for remote reading (5th picture)..
  • For product description, you can also refer to “Specification Sheet” in “Product guides and documents”. To install the DAE 3/4" water meter with the 3/4" garden hose at both ends (or one end with hose bibb and the o....
Check Stock

Forney 85364 MIG Gas Flow Meter and Regulator, MIG/TIG Welders

  • Combination of regulator and flow meter as one single stage piston design unit.
  • Provides accurate regulation of gas flow.
  • Impact resistant machined brass body, polycarbonate flow tube and outer cover.
  • Features regulator and flow meter in one unit.
  • Provides accurate regulation of gas flow designed for MIG and TIG applications.
Check Stock

DAE MJ-100 1\ NSF61 Lead Free Potable Water Meter, Pulse Output + Couplings, Gallons

  • Horizontal mount with dial facing upward. For the water meter to be installed vertically with water flowing upward, please refer to DAE PD-100 (B08D7356MY), which can be able to be installed in any position, vertically or horizontally, dial facing upwards or downwards or horizontally, water flowing downwards or upwards..
  • Certified by NSF to meet ANSI/NSF 61 for material safety and ANSI/NSF 372 for lead free plumbing as defined by the US Safe Drinking Water Act. Factory Calibration Certificates available. DAE Controls LLC is a Minority Business. Please feel free to get the NMSDC Minority Supplier Certificate from DAE Controls Website..
  • Cloud Metering available (2nd picture) with DAE CC2030 Gateway. CC2030 will collect water usage from DAE AMR (for 16 meters) or AMR130AN (for 1 meter) and send them to cloud server through Ethernet. With PC, cell phone, the landlords can see real time data, monthly water usage & billing reports to their tenants. If there is abnormal usage (ex. Broken piping), an email alert will be sent to your cell phone. No IT guy required. Just connect wires as per a simple picture (see video) & ready to go..
  • Ready for use with CO-10 (Electronic Pulse Counter) or CO-10 KIT - An inexpensive remote reading solution (6th picture). Can also....
Check Stock

Extech AN200 CFM/CMM Mini Thermo-Anemometer with Built-in Infrared Thermometer

  • Item is a Class II laser product, 1mW power output..
  • Large display of airflow or air velocity with built-in infrared thermometer.
  • CFM/CMM Thermo-Anemometer with built-in non-contact IR thermometer measures remote surface temperatures to 500-Degrees F (260-Degrees C).
  • Simultaneous display of air flow or air velocity plus ambient temperature.
  • Easy to set area dimensions (cm2) are stored in the meter's internal memory for the next power on.
Check Stock

2 Pieces GM816 Digital Anemometer Handheld Wind Speed Meter LCD Backlight Wind Meter Light Weight Air Flow Meter Wind Indicator Speed Gauges Measurement Thermometer for Kite Flying, Sailing, Surfing

  • LCD display: 2 pieces GM816 handheld anemometers are included in the package, with LCD backlight display, after a long press on the mode button for 3 seconds to open and the LCD screen will light up, LCD backlight is more intelligent, so you can know the wind speed directly.
  • Accurate measurement: the measurements of this digital LCD backlight wind meter is stable and accurate, with wind speeds ranging from 0 to 65 m/s and the wind speed accuracy is 0.1 DGT.
  • Meanwhile, it can measure temperatures from minus 10 degrees to 45 degrees.
  • Multi-function measurement: the light weight air flow meter has 3 kinds of wind speed to choose, namely biggest wind speed, average wind speed and current wind speed, you can choose different gears according to the situation.
  • This anemometer measures wind speed in 5 choices, so you have a variety of options.
  • Data hold function: this wind speed meter can adjust Celsius or Fahrenheit temperature and record data through the built-in temperature regulator, and it comes with a yellow protective case and wrist strap.
  • Wide applications: these wind indicator speed gauges can be applied in a variety of applications, such as offshore operations, environmental monitoring, air conditioning systems, kite flying, sailing, surfing and other ....
Check Stock

testo 420 I Balometer Kit with airflow capture hood for large air supplies and returns and swirl outlets I With Bluetooth and optional NIST certification

  • Versatile: The testo 420 balometer flow hood provides reliable data for air velocity, volume flow, absolute and differential pressure, air....
  • Efficient: The unique CEC approved flow straightener converts the turbulent air into a virtually uniform airflow, achieving particularly accurate data....
  • Easy operation: Thanks to the lightweight design, ergonomic handles and tiltable display, the durable air velocity meter offers a convenient....
  • MeasureQuick App: Follow all measurements remotely via Bluetooth from a smartphone or tablet. Send results directly from the job site for a more....
  • Portable: Equipped with a removable control unit, the HVAC tool set can be combined with an optional pitot tube and connection hose to enable....
Check Stock

Argon/CO2 Flow Meter Gas Regulator Compatible with Mig Tig Welder Regulator with 6.6FT Gas Hose 10 to 60 CFH Output Flow 0 to 4000 PSI - CGA-580 Inlet argon flow gauge welding regulator

  • ...rdy and durable, which can withstand harsh environments and have a longer life. Came with 6.6 Ft argon welding gas regulator hose and protective cover are made of impact-resistant composite material for safety and durability.
  • 【Wide Application】Idea choice for CGA 580 Tank Fitting. This Gas Pressure Regulator/Flowmeter Can Be Used with Argon, Helium and CO2 Gas Tanks (CGA-580 Inlet). So it will screw right into the Argon, Argon/CO2 tanks. IDEAL FOR Miller, Lincoln, Hobart, HTP, and most other welders! Idea choice for MIG TIG welding, cutting ,chemical and electronics industry.
  • 【Accurate Gas Flow Gague】Adjustable from 10 to 60 cfh (cubic feet per hour), and is indicated by a ball which moves up and down in the flow tube. 0-4000psi inlet pressure, easy-to-read bottle pressure gauge included, allowing you to view how much gas is left in the tank range 0 to 4000psi. Will fit both the female 9/16" x 18 nut or the male 5/8" x 18 fitting. It also comes with a standard 1/4" barbed fitting.
  • 【Good Design】Use economic style flow meter regulator and single stage piston design, combination of regulator and flow meter as one unit, compact lightweight construction, convenient for use. Argon Regulator is a ideal choice for professional TIG/MIG welding applic....
Check Stock

Tier1 48,000 Grain High Efficiency Digital Whole House Water Softener with Under Sink Reverse Osmosis System - Everyday Series

  • DIGITAL METER HEAD CONTROL VALVE: LCD display, electric plug in, improved features, and ease of operation as compared to Fleck 5600SXT..
  • COMPLETE WATER SOFTENER and 5-STAGE REVERSE OSMOSIS SYSTEMS: Each system includes a brine tank, pre-filled mineral tank with 1.5 cubic feet of Cation....
  • ADDITION OF THE 5-STAGE REVERSE OSMOSIS SYSTEM: The Tier1 RO5 Under Sink Reverse Osmosis System features a continuous water flow and efficient....
  • SCALE REDUCTION: Protects fixtures, pipes, and appliances from harmful scale. Prevents damage from hard minerals such as calcium and magnesium....
  • SMART SPACE SAVING DESIGN: Its unique precision turbine meter is incorporated in the system bypass valve saving over 4 feet of floor space. 10 x 54....
Check Stock

Koselig Instruments - Hotwire Anemometer | Handheld Anemometer with Telescopic Probe | Measure Wind Speed to 0.01 M/S

  • EASY TO USE - Durable handheld anemometer with large, easy to read display. No internet required..
  • RELIABLE - Our duct anemometer is the perfect fieldpiece for professional HVAC techs and anyone who needs an accurate, reliable wind speed/air flow cfm meter with an excellent range. The airflow meter takes measurements with both CFM and CMM and the hot wire anemometer technology is perfect for taking slow wind speeds..
  • ACCURATE - Temperature measurements are in both Centigrade and Fahrenheit, with a range of 0-50°C/32-122 °F and a resolution of 0.1°C.
  • The hotwire anemometer comes with a robust, injection-moulded plastic road case. Power: x3 AA batteries, 1.5v..
  • Koselig, LLC is an American electronics company with a focus on high quality products without the huge price tag. We test our products here in the states and our guarantee is for a full year from the date of purchase..
Check Stock